General Information

Abstract

This European Standard specifies a method for the determination of the elastic recovery of bituminous binders in a ductilometer at the test temperature (typically 25 °C or 10 °C; other temperatures can be used).
It is especially applicable to bituminous binders modified with thermoplastic elastomers, but can also be used with other bituminous binders which generate only small recovery.
WARNING — The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Status
Withdrawn
Publication Date
25-May-2010
Withdrawal Date
22-Sep-2026
ICS
75.140 - Waxes, bituminous materials and other petroleum products
 
91.100.50 - Binders. Sealing materials
Technical Committee
CEN/TC 336 - Bituminous binders
Drafting Committee
CEN/TC 336/WG 1 - Bituminous binders for paving
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
06-Dec-2017
Completion Date
23-Sep-2026
Directive
Harmonized Standard305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
 
Not Harmonized89/106/EEC - Construction products
Ref Project
SIST EN 13398:2010 - Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen

Buy Documents

Relations

Replaces
EN 13398:2003 - Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen
Effective Date
22-Dec-2008
Replaced By
EN 13398:2017 - Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen
Effective Date
08-Jun-2015
Refers
ISO 5725-3:1994 - Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method
Effective Date
25-Aug-2026
Refers
ISO 5725-1:1994/Cor 1:1998 - Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions — Technical Corrigendum 1
Effective Date
25-Aug-2026
Refers
ISO 5725-3:1994/Cor 1:2001 - Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method — Technical Corrigendum 1
Effective Date
25-Aug-2026
Refers
ISO 5725-2:1994 - Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
Effective Date
25-Aug-2026
Refers
ISO 5725-6:1994/Cor 1:2001 - Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values — Technical Corrigendum 1
Effective Date
25-Aug-2026
Refers
ISO 5725-4:1994 - Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
Effective Date
25-Aug-2026
Refers
ISO 5725-1:1994 - Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
Effective Date
25-Aug-2026
Refers
ISO 5725-6:1994 - Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
Effective Date
25-Aug-2026
Refers
ISO 5725-2:1994/Cor 1:2002 - Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method — Technical Corrigendum 1
Effective Date
25-Aug-2026
Refers
ISO 5725-5:1998 - Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
Effective Date
25-Aug-2026
Refers
ISO 5725-5:1998/Cor 1:2005 - Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method — Technical Corrigendum 1
Effective Date
09-Feb-2026
Refers
EN 13589:2018 - Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method
Effective Date
28-Jan-2026
Refers
ENV 14237:2002 - Textiles in the healthcare system
Effective Date
28-Jan-2026

Buy Documents

Get Certified

Connect with accredited certification bodies for this standard

DIBt (Deutsches Institut für Bautechnik)

German Institute for Building Technology.

DAKKS Germany Verified
Visit Website

DIN CERTCO

DIN Group product certification.

DAKKS Germany Verified
Visit Website

Element Materials Technology

Materials testing and product certification.

UKAS United Kingdom Verified
Visit Website

Sponsored listings

Frequently Asked Questions

EN 13398:2010 is a standard published by the European Committee for Standardization (CEN). Its full title is "Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen". This standard covers: This European Standard specifies a method for the determination of the elastic recovery of bituminous binders in a ductilometer at the test temperature (typically 25 °C or 10 °C; other temperatures can be used). It is especially applicable to bituminous binders modified with thermoplastic elastomers, but can also be used with other bituminous binders which generate only small recovery. WARNING — The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

This European Standard specifies a method for the determination of the elastic recovery of bituminous binders in a ductilometer at the test temperature (typically 25 °C or 10 °C; other temperatures can be used). It is especially applicable to bituminous binders modified with thermoplastic elastomers, but can also be used with other bituminous binders which generate only small recovery. WARNING — The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

EN 13398:2010 is classified under the following ICS (International Classification for Standards) categories: 75.140 - Waxes, bituminous materials and other petroleum products; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 13398:2010 has the following relationships with other standards: It is inter standard links to EN 13398:2003, EN 13398:2017, ISO 5725-3:1994, ISO 5725-1:1994/Cor 1:1998, ISO 5725-3:1994/Cor 1:2001, ISO 5725-2:1994, ISO 5725-6:1994/Cor 1:2001, ISO 5725-4:1994, ISO 5725-1:1994, ISO 5725-6:1994, ISO 5725-2:1994/Cor 1:2002, ISO 5725-5:1998, ISO 5725-5:1998/Cor 1:2005, EN 13589:2018, ENV 14237:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 13398:2010 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 13398:2010 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RGLILFLUDQLKELWXPQRYBitumen und bitumenhaltige Bindemittel - Bestimmung der elastischen Rückstellung von modifiziertem BitumenBitumes et liants bitumineux - Détermination du retour élastique des bitumes modifiésBitumen and bituminous binders - Determination of the elastic recovery of modified bitumen91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13398:2010SIST EN 13398:2010en,de01-oktober-2010SIST EN 13398:2010SLOVENSKI
STANDARDSIST EN 13398:20041DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13398
May 2010 ICS 75.140; 91.100.50 Supersedes EN 13398:2003English Version
Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen
Bitumes et liants bitumineux - Détermination du retour élastique des bitumes modifiés
Bitumen und bitumenhaltige Bindemittel - Bestimmung der elastischen Rückstellung von modifiziertem Bitumen This European Standard was approved by CEN on 23 April 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13398:2010: ESIST EN 13398:2010

Dimensioning of the sample and keeping this sample at the specified test temperature are now in line with EN 13589. 3) The formula for calculating the elastic recovery is now expressed by mentioning the elongation L, which also enables to determine the elastic recovery in case of premature .break (i.e. due to brittleness). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
...