iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 969:1998

(Main)

Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements and test methods

Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements and test methods

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for theconstruction of pipelines: - to convey air or combustible gases (e.g. natural gas or town gas) at pressures up to 16 bar; - to be installed below or above ground. Note 1: A combustible gas is a gas or any fuel that is in a gaseous state at a temperature of 15°C at a pressure of 1 bar.

Rohre, Formstücke, Zubehörteile aus duktilem Gußeisen und ihre Verbindungen für Gasleitungen - Anforderungen und Prüfverfahren

Diese europäische Norm legt die Anforderungen und die diesbezüglichen Prüfverfahren fest, die auf duktile Gußrohre, Formstücke, Zubehörteile und ihre Verbindungen anwendbar sind zur Errichtung von Rohrleitungen: - zum Transport von Luft oder brennbaren Gasen (z.B. Erdgas oder Stadtgas) bis zu einem Druck von 16 bar; -oberirdisch oder erdverlegt. Anmerkung 1: Ein brennbares Gas ist ein Gas oder ein beliebiger Brennstoff, der bei einer Temperatur von 15°C und einen Druck von 1 bar gasförmig ist.

Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour canalisations de gaz - Prescriptions et méthodes d'essai

La présente norme européenne prescrit les exigences et les méthodes d'essai associées applicables aux tuyaux, raccords et accessoires en fonte ductile et à leurs assemblages, destinés à la construction de canalisations: - pour transporter de l'air ou des gaz combustibles (p.ex.: gaz naturel ou gaz de ville) à des pressions pouvant atteindre 16 bars; - installées dans le sol ou enaérien. Note 1: Un gaz combustible est un gaz ou tout combustible qui est à l'état gazeux à la température de 15°C et à la pression de 1 bar.

Cevi, fitingi in dodatki iz duktilne litine za plinovode - Zahteve in postopki preskušanja

General Information

Status
Withdrawn
Publication Date
30-Sep-1998
Withdrawal Date
27-Apr-2009
ICS
77.140.75 - Steel pipes and tubes for specific use
91.140.40 - Gas supply systems
Technical Committee
TLP - Pressure vessels
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Apr-2009
Due Date
14-May-2009
Completion Date
28-Apr-2009
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
EN 969:1995 - Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements and test methods

Relations

Replaced By
SIST EN 969:2009 - Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
Effective Date
01-Jun-2009
Amended By
SIST EN 969:1998/A1:1999 - Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements and test methods
Effective Date
08-Jun-2022

Buy Standard

EN 969:1998EN 969:1998
PreviousNext
Standard
EN 969:1998
English language
61 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-1998
Cevi, fitingi in dodatki iz duktilne litine za plinovode - Zahteve in postopki
preskušanja
Ductile iron pipes, fittings accessories and their joints for gas pipelines - Requirements
and test methods
Rohre, Formstücke, Zubehörteile aus duktilem Gußeisen und ihre Verbindungen für
Gasleitungen - Anforderungen und Prüfverfahren
Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour
canalisations de gaz - Prescriptions et méthodes d'essai
Ta slovenski standard je istoveten z: EN 969:1995
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
91.140.40 Sistemi za oskrbo s plinom Gas supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 969:199
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 969:2009(Main)
Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
EN 969:2009

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints used for the construction of external pipelines:
-   to convey air or combustible gases (e.g. natural gas or town gas) at pressures up to 16 bar;
-   to be installed below or above ground.
NOTE 1   A combustible gas is a gas or any fuel that is in gaseous state at a temperature of 15 °C at a pressure of 1 bar.
This European Standard applies to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   normally delivered externally and internally coated;
-   suitable for gas temperatures between - 15 °C and 50 °C.
This European Standard covers pipes, fittings and accessories cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, in a size range extending from DN 40 to DN 600 inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shape are outside the scope of this European Standard.
NOTE 2   In this European Standard, all pressures are relative pressures expressed in bars (100 kPa = 1 bar).

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15266:2025(Main)
Stainless steel pliable corrugated tubing kits for gas installation pipework with an operating pressure up to 0,2 MPa (2 bar)
EN 15266:2024

This document specifies the requirements for material, design, manufacture, testing, marking and documentation of stainless steel pliable corrugated gas tubing kits for gas installation pipework with a maximum allowable pressure (PS):
-   less than or equal to 0,5 bar within a nominal size range from DN 10 to DN 50 (class 1); and
-   less than or equal to 2 bar within a nominal size range from DN 10 to DN 25 (class 2).
This document applies to stainless steel pliable corrugated gas tubing kits used for 1st, 2nd and 3rd family gases (see EN 437) in residential, commercial and industrial gas installations to be installed outdoors or indoors at a temperature range from –20 °C to +60 °C.
This document does not apply to:
-   pliable tubing without cover;
-   corrugated safety metal hose assemblies for connection to moveable appliances.
NOTE   This document does not cover the installation aspects of stainless steel pliable corrugated gas tubing kits.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12007-3:2015(Main)
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel
EN 12007-3:2015

This European Standard describes the specific functional requirements for steel pipelines in addition to the general functional requirements of EN 12007-1 for maximum operating pressures up to and including 16 bar. This European Standard specifies common basic principles for gas infrastructure. Users of this European Standard should be aware that more detailed national standards and/or codes of practice may exist in the CEN member countries.
This European Standard is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
In the event of conflicts in terms of more restrictive requirements in national legislation/regulation with the requirements of this standard, national legislation/regulation takes precedence as illustrated in CEN/TR 13737 (all parts).
CEN/TR 13737 (all parts) gives:
-   clarification of all legislation/regulations applicable in a member state;
-   if appropriate, more restrictive national requirements;
-   a national contact point for the latest information.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 969:2009(Main)
Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
EN 969:2009

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints used for the construction of external pipelines:
-   to convey air or combustible gases (e.g. natural gas or town gas) at pressures up to 16 bar;
-   to be installed below or above ground.
NOTE 1   A combustible gas is a gas or any fuel that is in gaseous state at a temperature of 15 °C at a pressure of 1 bar.
This European Standard applies to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   normally delivered externally and internally coated;
-   suitable for gas temperatures between - 15 °C and 50 °C.
This European Standard covers pipes, fittings and accessories cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, in a size range extending from DN 40 to DN 600 inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shape are outside the scope of this European Standard.
NOTE 2   In this European Standard, all pressures are relative pressures expressed in bars (100 kPa = 1 bar).

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14800:2007(Main)
Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
EN 14800:2007

This European Standard specifies the requirements of performance, the material and the test methods of corrugated flexible safety metallic hose assemblies for the connection of domestic appliances, in order to achieve save operation.
The corrugated metal gas hose assemblies according to this European Standard are suitable for the connection of domestic appliances inside or outside a dwelling, using gas at a pressure lower than 0,5 bar.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 488-2:2025(Main)
District heating and district cooling pipes - Bonded pipe systems for directly buried hot and cold water networks - Factory made steel valve assembly for draining and venting, polyurethane thermal insulation and a casing of polyethylene
EN 488-2:2025

This document specifies requirements for factory made thermally insulated bonded steel service valve assemblies for filling, draining, venting and operation purposes for directly buried hot and cold water networks in accordance with EN 13941-1, comprising a steel service valve, steel service pipe, polyurethane (PUR) foam thermal insulation and a casing of polyethylene (PE).
This document applies of steel service valve assemblies with an internal pressure of maximum 2,5 MPa.
The principles of this document can be applied to thermal insulated bonded steel service valve assemblies with internal pressures higher than 2,5 MPa, provided that special attention is paid to the effects of pressure.
The steel service valve assembly can also include the following additional elements: measuring wires, spacers, and diffusion barriers.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15698-2:2025(Main)
District heating pipes - Bonded twin pipe systems for directly buried hot water networks - Part 2: Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
EN 15698-2:2025

This document specifies requirements and test methods for fitting and steel valve assemblies of factory made thermally insulated bonded twin pipe assemblies for hot water networks in accordance with EN 13941-1, comprising two steel service pipes, in most cases steel fittings and/or steel valves, steel components, polyurethane (PUR) foam thermal insulation and one casing of polyethylene.
NOTE   Steel components can be e.g. fixing bars.
The twin pipe assembly can also include the following additional elements: measuring wires, spacers and diffusion barriers.
This document covers the following assemblies:
-   fittings: bends, T-pieces and reducers;
-   valves for main line.
This document applies to fitting assemblies with an internal pressure of at least 1,6 MPa and steel valve assemblies with a maximum internal pressure of 2,5 MPa.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 415-8:2025(Main)
Safety of packaging machines - Part 8: Strapping machines
EN 415-8:2025

This document is applicable to the following groups of machines:
-   powered hand strapping tools;
-   semi-automatic strapping machines;
-   automatic strapping machines.
This document does not apply to:
-   strapping tools, where the strap tension is only applied by manual effort;
-   machines, intended for use with paper strap;
-   hand-held motor-operated electric strapping tools.
NOTE   For hand-held motor-operated electric strapping tools see EN 60745-2-18:2009 and EN 62841-1:2015.
This document deals with safety requirements for machine design, transport, installation, commissioning, operation, adjustment, maintenance and cleaning. The extent to which hazards, hazardous situations and events are covered is indicated in Annex A.
This document does not consider the following hazards:
-   the use of strapping machines in potentially explosive atmosphere;
-   the health, safety or hygiene hazards associated with the products that may be handled by the machines, but does include general advice on this subject;
-   hazards that are associated with decommissioning strapping machines.
Hazards associated with decommissioning of strapping machines are not considered and therefore excluded but are generally part of the instruction manual (see Clause 6), together with suited measures, if necessary.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 3155-009:2025(Main)
Aerospace Series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard
EN 3155-009:2025

This document specifies the required characteristics, tests and tooling applicable to female electrical contacts 009, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It is used together with EN 3155-001.
The associated male contacts are specified in EN 3155-008.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13757-7:2025(Main)
Communication systems for meters - Part 7: Transport and security services
EN 13757-7:2025

This document specifies transport and security services for communication systems for meters, sensors, and actuators, used to provide metering services.
This document specifies secure communication capabilities by design and supports the building of a secure system architecture.
This document is applicable to the protection of consumer data to ensure privacy.
This document is intended to be used with the lower layer specifications determined in the relevant parts of the EN 13757 series.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day