29.035.01 - Insulating materials in general
ICS 29.035.01 Details
Insulating materials in general
Isolierstoffe im allgemeinen
Materiaux isolants electriques en general
Izolacijski materiali na splošno
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 29.035.01 - Insulating materials in general
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
IEC 60216-1:2025 specifies the general ageing conditions and procedures to be used for deriving thermal endurance characteristics and gives guidance in using the detailed instructions and guidelines in the other parts of IEC 60216. Although originally developed for use with electrical insulating materials and simple combinations of such materials, the procedures are considered to be of more general applicability and are widely used in the assessment of materials not intended for use as electrical insulation. In the application of this document, it is assumed that a practically linear relationship exists between the logarithm of the time required to cause the predetermined property change and the reciprocal of the corresponding absolute temperature (Arrhenius relationship). For the valid application of this document, no transition, in particular no first-order transition, is expected to occur in the temperature range under study.
This edition includes the following significant technical changes with respect to the previous edition:
a) the definition for temperature index (TI) has been updated;
b) requirements for selection of related materials used, e.g. in different colours (5.1.2), have been added;
c) test procedure for thickness sensitivity (5.5 et 6.6) has been added;
d) Annex C "Concepts in earlier editions" has been deleted.
- Standard30 pagesEnglish languagesale 15% off
- Standard31 pagesFrench languagesale 15% off
- Standard61 pagesEnglish and French languagesale 15% off
IEC 60112:2025 specifies the method of test for the determination of the proof and comparative tracking indices of solid insulating materials on pieces taken from parts of equipment and on plaques of material using alternating voltage. This document provides a procedure for the determination of erosion when required. The proof tracking index is used as an acceptance criterion as well as a means for the quality control of materials and fabricated parts. The comparative tracking index is mainly used for the basic characterization and comparison of the properties of materials. This test method evaluates the composition of the material as well as the surface of the material being evaluated. Both the composition and surface condition directly influence the results of the evaluation and are considered when using the results in material selection process. The described test method is designed for a test voltage up to 600 V AC, because higher test voltages and DC voltage will lead to a reduced test severity. Test results are not directly suitable for the evaluation of safe creepage distances when designing electrical apparatus. The results of this method have been used for insulation coordination of equipment. It is important that use of these results also considers the overvoltage levels, creepage distances, and establishes the pollution degree to which the product insulation system will be expected to be subjected. This is in compliance with IEC 60664-1. This basic safety publication focusing on a safety test method is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This sixth edition cancels and replaces the fifth edition published in 2020. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- In 7.3, the term "resistivity" has been replaced by "conductivity".
It has the status of a basic safety publication in accordance with IEC Guide 104.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60112:2025 specifies the method of test for the determination of the proof and comparative tracking indices of solid insulating materials on pieces taken from parts of equipment and on plaques of material using alternating voltage. This document provides a procedure for the determination of erosion when required. The proof tracking index is used as an acceptance criterion as well as a means for the quality control of materials and fabricated parts. The comparative tracking index is mainly used for the basic characterization and comparison of the properties of materials. This test method evaluates the composition of the material as well as the surface of the material being evaluated. Both the composition and surface condition directly influence the results of the evaluation and are considered when using the results in material selection process. The described test method is designed for a test voltage up to 600 V AC, because higher test voltages and DC voltage will lead to a reduced test severity. Test results are not directly suitable for the evaluation of safe creepage distances when designing electrical apparatus. The results of this method have been used for insulation coordination of equipment. It is important that use of these results also considers the overvoltage levels, creepage distances, and establishes the pollution degree to which the product insulation system will be expected to be subjected. This is in compliance with IEC 60664-1. This basic safety publication focusing on a safety test method is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This sixth edition cancels and replaces the fifth edition published in 2020. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - In 7.3, the term "resistivity" has been replaced by "conductivity". It has the status of a basic safety publication in accordance with IEC Guide 104.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60112:2025 specifies the method of test for the determination of the proof and comparative tracking indices of solid insulating materials on pieces taken from parts of equipment and on plaques of material using alternating voltage. This document provides a procedure for the determination of erosion when required. The proof tracking index is used as an acceptance criterion as well as a means for the quality control of materials and fabricated parts. The comparative tracking index is mainly used for the basic characterization and comparison of the properties of materials. This test method evaluates the composition of the material as well as the surface of the material being evaluated. Both the composition and surface condition directly influence the results of the evaluation and are considered when using the results in material selection process. The described test method is designed for a test voltage up to 600 V AC, because higher test voltages and DC voltage will lead to a reduced test severity. Test results are not directly suitable for the evaluation of safe creepage distances when designing electrical apparatus. The results of this method have been used for insulation coordination of equipment. It is important that use of these results also considers the overvoltage levels, creepage distances, and establishes the pollution degree to which the product insulation system will be expected to be subjected. This is in compliance with IEC 60664-1. This basic safety publication focusing on a safety test method is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This sixth edition cancels and replaces the fifth edition published in 2020. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- In 7.3, the term "resistivity" has been replaced by "conductivity".
It has the status of a basic safety publication in accordance with IEC Guide 104.
- Standard67 pagesEnglish languagesale 15% off
IEC TR 62899-250:2025 explores a new technological field to establish standardization activities in TC 119 (Printed electronics) in particular, and to contribute to the development and market expansion of wearable smart device (WSD) technology.
This edition includes the following significant technical changes with respect to the previous edition:
a) added classification of e-textile integrated type;
b) added Clause 5, “Verification of conclusions in IEC TR 62899-250:2016 (edition 1)”;
c) added explanation of 3D printed circuits;
d) introduced trends in standardization activities, especially those after the first edition publication;
e) added new issues that became clear after the first edition was published.
- Technical report17 pagesEnglish languagesale 15% off
IEC 62841-2-14:2015 applies to hand-held planners the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. Key words: Planner, Hand held, Cutting head
This publication is to be read in conjunction with IEC 62841-1:2014.
- Standard20 pagesEnglish languagesale 15% off
- Standard42 pagesEnglish languagesale 15% off
- Standard40 pagesEnglish and French languagesale 15% off
- Corrigendum4 pagesEnglish languagesale 10% offe-Library read for1 day
- Corrigendum4 pagesEnglish languagesale 10% offe-Library read for1 day
IEC TR 60216-7-2:2024 is intended to validate the procedures of IEC TS 60216-7-1 in providing a similar temperature index to conventional methods used in other parts of the IEC 60216 series. The round robin test results do not provide statistical analysis for precision. The round robin test focuses on preliminary studies to understand the evaluation and calculation procedures, influence on apparatus, and data variance among laboratories before determination of precision. This second edition cancels and replaces the first edition published in 2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Annex A (informative) has been added to provide a round robin test with a different polymer type - polybuthylene terephthalate (PBY) - as an additional use case of the method in accordance with IEC TS 60216-7-1;
b) Tables 3 to 11 have been corrected by adding units, and texts have been refined for more technical clarifications of the procedures and observations.
- Technical report35 pagesEnglish languagesale 15% off
- Technical report70 pagesEnglish languagesale 15% off
IEC 62305-4:2024 provides requirements for the design, installation, inspection, maintenance, and testing of surge protection measures (SPM) for electrical and electronic systems to reduce the risk of permanent failures due to lightning electromagnetic impulse (LEMP) within a structure.
This third edition cancels and replaces the second edition published in 2010. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) addition of new informative Annex E and Annex F on the determination of current sharing using modelling and current sharing in PV installations respectively;
b) addition of a new informative Annex G on methods of testing of system level behaviour;
c) addition of a new informative Annex H on induced voltages in SPD-protected installations.
- Standard270 pagesEnglish and French languagesale 15% off
IEC 62631-3-12:2024 specifies a method of test for the determination of volume resistance and volume resistivity of electrical insulation materials by applying a DC voltage. It covers casting resins described in IEC 60455-3-1, IEC 60455-3-2, IEC 60455-3-3, IEC 60455-3-4, IEC 60455-3-8 and similar products.
For other specific types of materials, other standards or the general method described in IEC 62631-3-1 can be more suitable.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62631-3-12:2024 specifies a method of test for the determination of volume resistance and volume resistivity of electrical insulation materials by applying a DC voltage. It covers casting resins described in IEC 60455-3-1, IEC 60455-3-2, IEC 60455-3-3, IEC 60455-3-4, IEC 60455-3-8 and similar products. For other specific types of materials, other standards or the general method described in IEC 62631-3-1 can be more suitable.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62631-3-12:2024 specifies a method of test for the determination of volume resistance and volume resistivity of electrical insulation materials by applying a DC voltage. It covers casting resins described in IEC 60455-3-1, IEC 60455-3-2, IEC 60455-3-3, IEC 60455-3-4, IEC 60455-3-8 and similar products.
For other specific types of materials, other standards or the general method described in IEC 62631-3-1 can be more suitable.
- Standard24 pagesEnglish and French languagesale 15% off
IEC 62631-2-3:2024 specifies the measuring technology and the test method for the relative permittivity and dielectric dissipation factor of thin single layer insulating polymer film without any additional metallization on the sample surface. The adaptive thickness range is approximately 10 μm to 100 μm. The proposed frequency is the power frequency (50 Hz or 60 Hz), and it is also suitable in the technical frequency range from 1 Hz to 1 MHz.
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62631-2-3:2024 specifies the measuring technology and the test method for the relative permittivity and dielectric dissipation factor of thin single layer insulating polymer film without any additional metallization on the sample surface. The adaptive thickness range is approximately 10 μm to 100 μm. The proposed frequency is the power frequency (50 Hz or 60 Hz), and it is also suitable in the technical frequency range from 1 Hz to 1 MHz.
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62836:2024 provides an efficient and reliable procedure to test the internal electric field in the insulating materials used for high-voltage applications, by using the pressure wave propagation (PWP) method. It is suitable for a planar and coaxial geometry sample with homogeneous insulating materials of thickness larger or equal to 0,5 mm and an electric field higher than 1 kV/mm, but it is also dependent on the thickness of the sample and the pressure wave generator.
This first edition cancels and replaces IEC TS 62836 published in 2020.
This edition includes the following significant technical changes with respect to IEC TS 62836:
a) addition of Clause 12 for the measurement of space charge distribution in a planar sample;
b) addition of Clause 13 for coaxial geometry samples;
c) addition of Annex D with measurement examples for coaxial geometry samples;
d) addition of a Bibliography;
e) measurement examples for a planar sample have been moved from Clause 12 in IEC TS 62836 to Annex C.
- Standard48 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62836:2024 provides an efficient and reliable procedure to test the internal electric field in the insulating materials used for high-voltage applications, by using the pressure wave propagation (PWP) method. It is suitable for a planar and coaxial geometry sample with homogeneous insulating materials of thickness larger or equal to 0,5 mm and an electric field higher than 1 kV/mm, but it is also dependent on the thickness of the sample and the pressure wave generator. This first edition cancels and replaces IEC TS 62836 published in 2020. This edition includes the following significant technical changes with respect to IEC TS 62836: a) addition of Clause 12 for the measurement of space charge distribution in a planar sample; b) addition of Clause 13 for coaxial geometry samples; c) addition of Annex D with measurement examples for coaxial geometry samples; d) addition of a Bibliography; e) measurement examples for a planar sample have been moved from Clause 12 in IEC TS 62836 to Annex C.
- Standard48 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62631-2-3:2024 specifies the measuring technology and the test method for the relative permittivity and dielectric dissipation factor of thin single layer insulating polymer film without any additional metallization on the sample surface. The adaptive thickness range is approximately 10 μm to 100 μm. The proposed frequency is the power frequency (50 Hz or 60 Hz), and it is also suitable in the technical frequency range from 1 Hz to 1 MHz.
The content of the corrigendum 1 (2025-04) has been included in this copy.
- Standard53 pagesEnglish and French languagesale 15% off
IEC 60455-2:2023 is available as IEC 60455-2:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60455-2:2023 specifies methods of test to be used for testing resin based reactive compounds, their components and cured compounds used for electrical insulation. This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) Introduction of test methods related to IEC 60455-3-8;
b) Additional and updated test methods for resins.
- Standard41 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62836:2024 provides an efficient and reliable procedure to test the internal electric field in the insulating materials used for high-voltage applications, by using the pressure wave propagation (PWP) method. It is suitable for a planar and coaxial geometry sample with homogeneous insulating materials of thickness larger or equal to 0,5 mm and an electric field higher than 1 kV/mm, but it is also dependent on the thickness of the sample and the pressure wave generator.
This first edition cancels and replaces IEC TS 62836 published in 2020.
This edition includes the following significant technical changes with respect to IEC TS 62836:
a) addition of Clause 12 for the measurement of space charge distribution in a planar sample;
b) addition of Clause 13 for coaxial geometry samples;
c) addition of Annex D with measurement examples for coaxial geometry samples;
d) addition of a Bibliography;
e) measurement examples for a planar sample have been moved from Clause 12 in IEC TS 62836 to Annex C.
- Standard93 pagesEnglish and French languagesale 15% off
IEC TS 61934:2024 is applicable to the off-line electrical measurement of partial discharges (PDs) that occur in electrical insulation systems (EISs) when stressed by repetitive voltage impulses generated from power electronics devices.
Typical applications are EISs belonging to apparatus driven by power electronics, such as motors, inductive reactors, wind turbine generators and the power electronics modules themselves.
NOTE Use of this document with specific products can require the application of additional procedures.
Excluded from the scope of this document are:
- methods based on optical or ultrasonic PD detection,
- fields of application for PD measurements when stressed by non-repetitive impulse voltages such as lightning impulse or switching impulses from switchgear.
This edition includes the following significant technical changes with respect to the previous edition:
a) background information on the progress being made in the field of power electronics including the introduction of wide band gap semiconductor devices has been added to the Introduction;
b) voltage impulse generators; the parameter values of the voltage impulse waveform have been modified to reflect application of wide band gap semiconductor devices.
c) PD detection methods; charge-based measurements are not described in this third edition nor are source-controlled gating techniques to suppress external noise.
d) Since the previous edition in 2011, there have been significant technical advances in this field as evidenced by several hundreds of publications. Consequently, the Bibliography in the 2011 edition has been deleted in this third edition.
- Technical specification27 pagesEnglish languagesale 15% off
- Technical specification58 pagesEnglish languagesale 15% off
IEC 60893-2:2023 is available as IEC 60893-2:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60893-2:2023 describes methods of test for the materials defined in IEC 60893-1 (referred to also as Part 1). This third edition cancels and replaces the second edition published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) removal of reference to withdrawn specification IEC 60167:1964;
b) inclusion of reference to IEC 62631-3-3:2015, which supersedes IEC 60167:1964. Details in 6.3 have been updated accordingly. The actual performance of the test has not changed;
c) normative references have been updated.
- Standard40 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62631-3-2:2023 describes methods of test for the determination of surface resistance and surface resistivity of electrical insulation materials by applying DC voltage. This edition includes the following significant technical changes with respect to the previous edition:
a) descriptions of the electrode arrangements have been clarified;
b) new descriptions of the conductive means have been added;
c) a new informative Annex B summarizing the results of the comparative verification study on surface resistivities using different electrode arrangements has been added.
- Standard36 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60893-2:2023 is available as IEC 60893-2:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60893-2:2023 describes methods of test for the materials defined in IEC 60893-1 (referred to also as Part 1). This third edition cancels and replaces the second edition published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) removal of reference to withdrawn specification IEC 60167:1964; b) inclusion of reference to IEC 62631-3-3:2015, which supersedes IEC 60167:1964. Details in 6.3 have been updated accordingly. The actual performance of the test has not changed; c) normative references have been updated.
- Standard40 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment6 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment6 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 62631-3-2:2023 describes methods of test for the determination of surface resistance and surface resistivity of electrical insulation materials by applying DC voltage. This edition includes the following significant technical changes with respect to the previous edition: a) descriptions of the electrode arrangements have been clarified; b) new descriptions of the conductive means have been added; c) a new informative Annex B summarizing the results of the comparative verification study on surface resistivities using different electrode arrangements has been added.
- Standard36 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment5 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60626-1:2023 is available as IEC 60626-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60626-1:2023 contains the definitions related to and the general requirements to be fulfilled by combined flexible materials for electrical insulation. This document does not include mica papers used as a primary component, which are covered by the IEC 60371 series, but insulation materials based on mica paper can be used as component of a combined flexible material. Materials which conform to this specification meet established levels of performance. However, the selection of material by a user for a specific application is based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This fourth edition cancels and replaces the third edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) the materials available for use within this series of standards have been updated;
b) a framework has been created to allow test methods beyond those used for quality control specifications to allow for testing for qualification purposes.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60893-2:2023 describes methods of test for the materials defined in IEC 60893-1 (referred to also as Part 1). This third edition cancels and replaces the second edition published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) removal of reference to withdrawn specification IEC 60167:1964;
b) inclusion of reference to IEC 62631-3-3:2015, which supersedes IEC 60167:1964. Details in 6.3 have been updated accordingly. The actual performance of the test has not changed;
c) normative references have been updated.
- Standard109 pagesEnglish languagesale 15% off
- Standard73 pagesEnglish and French languagesale 15% off
- Standard8 pagesEnglish and French languagesale 15% off
IEC 60811-508:2012 gives the procedure for a pressure test at high temperature, which typically applies to thermoplastic compounds used for insulating and sheathing materials. IEC 60811-508:2012 cancels and replaces Clause 8 of IEC 60811-3-1:1985, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. Significant technical changes with respect to the previous edition are as follows:
- re-statement of oven characteristics, especially relating to anti-vibration and to temperature control;
- enhanced detail as to the preparations and testing of flat cables;
- enhanced detail as to thickness and dimensional measurements. See also the Foreword to IEC 60811-100:2012.
This publication is to be read in conjunction with IEC 60811-100:2012.
- Standard7 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard36 pagesEnglish and French languagesale 15% off
- Standard73 pagesEnglish and French languagesale 15% off
- Standard76 pagesEnglish and French languagesale 15% off
IEC 60811-201:2012 gives the methods for measuring the insulation thicknesses which apply to the most common types of insulating compounds (cross-linked, PVC, PE, PP, etc.). IEC 60811-201:2012 cancels and replaces 8.1 of IEC 60811-1-1:1993, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012.
This publication is to be read in conjunction with IEC 60811-100:2012.
- Standard21 pagesEnglish and French languagesale 15% off
- Standard42 pagesEnglish and French languagesale 15% off
- Standard43 pagesEnglish and French languagesale 15% off
IEC 60811-501:2012 gives the procedure for determining the mechanical properties, which typically applies to cross-linked and thermoplastic compounds used for insulating and sheathing materials. IEC 60811-501:2012 cancels and replaces Clause 9 of IEC 60811-1-1:1993, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There is one significant technical change with respect to the previous edition: the requirements for the (minimum) thickness of dumb-bell test pieces have changed. See also the Foreword to IEC 60811-100.
This publication is to be read in conjunction with IEC 60811-100:2012.
- Standard7 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard33 pagesEnglish and French languagesale 15% off
- Standard67 pagesEnglish and French languagesale 15% off
- Standard68 pagesEnglish and French languagesale 15% off
- Standard5 pagesEnglish and French languagesale 15% off
IEC 60811-503:2012 gives the test method for the shrinkage for sheaths. IEC 60811-503:2012 cancels and replaces Clause 11 of IEC 60811-1-3:1993, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012.
This publication is to be read in conjunction with IEC 60811-100:2012.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard16 pagesEnglish and French languagesale 15% off
- Standard32 pagesEnglish and French languagesale 15% off
- Standard6 pagesEnglish and French languagesale 15% off
- Standard5 pagesEnglish and French languagesale 15% off
IEC 60811-202:2012 gives the methods for measuring thicknesses of non-metallic sheath which apply to the most common types of sheathing compounds (cross-linked, PVC, PE, PP, etc.). IEC 60811-202:2012 cancels and replaces 8.2 of IEC 60811-1-1:1993, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012.
This publication is to be read in conjunction with IEC 60811-100:2012.
- Standard24 pagesEnglish and French languagesale 15% off
- Standard49 pagesEnglish and French languagesale 15% off
- Standard49 pagesEnglish and French languagesale 15% off
IEC 62631-3-2:2023 describes methods of test for the determination of surface resistance and surface resistivity of electrical insulation materials by applying DC voltage. This edition includes the following significant technical changes with respect to the previous edition:
a) descriptions of the electrode arrangements have been clarified;
b) new descriptions of the conductive means have been added;
c) a new informative Annex B summarizing the results of the comparative verification study on surface resistivities using different electrode arrangements has been added.
- Standard103 pagesEnglish languagesale 15% off
- Standard66 pagesEnglish and French languagesale 15% off