EN 14895:2006
(Main)Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders
General Information
- Abstract
This document specifies a method for the stabilisation of binder from bituminous emulsions or from cut-back or fluxed bituminous binders that will permit further testing.
It applies to all types of bituminous emulsion, with or without polymers, and as well as to all types of bituminous cut-back and fluxed materials, with or without polymers.
WARNING — The use of this document may involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. The hazards associated with the use of this method have been assessed using cut-back bitumen containing 10 % kerosene and 90 % 160/220 penetration grade bitumen and were found to be acceptable. However it is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
- Status
- Withdrawn
- Publication Date
- 11-Apr-2006
- Withdrawal Date
- 15-Feb-2011
- Technical Committee
- CEN/TC 336 - Bituminous binders
- Drafting Committee
- CEN/TC 336 - Bituminous binders
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 16-Feb-2011
- Completion Date
- 16-Feb-2011
- Directive
- Harmonized Standard305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Not Harmonized89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Element Materials Technology
Materials testing and product certification.
Sponsored listings
Frequently Asked Questions
EN 14895:2006 is a standard published by the European Committee for Standardization (CEN). Its full title is "Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders". This standard covers: This document specifies a method for the stabilisation of binder from bituminous emulsions or from cut-back or fluxed bituminous binders that will permit further testing. It applies to all types of bituminous emulsion, with or without polymers, and as well as to all types of bituminous cut-back and fluxed materials, with or without polymers. WARNING — The use of this document may involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. The hazards associated with the use of this method have been assessed using cut-back bitumen containing 10 % kerosene and 90 % 160/220 penetration grade bitumen and were found to be acceptable. However it is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
This document specifies a method for the stabilisation of binder from bituminous emulsions or from cut-back or fluxed bituminous binders that will permit further testing. It applies to all types of bituminous emulsion, with or without polymers, and as well as to all types of bituminous cut-back and fluxed materials, with or without polymers. WARNING — The use of this document may involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. The hazards associated with the use of this method have been assessed using cut-back bitumen containing 10 % kerosene and 90 % 160/220 penetration grade bitumen and were found to be acceptable. However it is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
EN 14895:2006 is classified under the following ICS (International Classification for Standards) categories: 75.140 - Waxes, bituminous materials and other petroleum products; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 14895:2006 has the following relationships with other standards: It is inter standard links to EN 13074-2:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 14895:2006 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 14895:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous bindersBitumen in bitumenska veziva – Stabilizacija veziva iz bitumenskih emulzij ali rezanih in fluksiranih bitumnovBitumes et liants bitumineux - Stabilisation du liant d'une émulsion de bitume ou d'un bitume fluxé ou fluidifiéBitumen und bitumenhaltige Bindemittel - Stabilisierung von Bindemittel aus Bitumenemulsionen oder verschnittenen oder gefluxten bitumenhaltigen BindemittelnTa slovenski standard je istoveten z:EN 14895:2006SIST EN 14895:2006en91.100.5075.140ICS:SLOVENSKI
STANDARDSIST EN 14895:200601-september-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14895April 2006ICS 75.140; 91.100.50 English VersionBitumen and bituminous binders - Stabilisation of binder frombituminous emulsions or from cut-back and fluxed bituminousbindersBitumes et liants bitumineux - Stabilisation du liant d'uneémulsion de bitume ou d'un bitume fluxé ou fluidifiéBitumen und bitumenhaltige Bindemittel - Stabilisierung vonBindemittel aus Bitumenemulsionen oder verschnittenenoder gefluxten bitumenhaltigen BindemittelnThis European Standard was approved by CEN on 27 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14895:2006: E
4 Principle 4.1 Bituminous emulsion A thin layer of bituminous emulsion is spread onto a sheet of suitable non-stick material and is allowed to stand in the laboratory for 24 h at ambient temperature and in a ventilated oven at 50 °C for 24 h according to EN 13074. This recovered binder is then stabilised for 24 h at 85 °C in a ventilated oven.
...