EN 13915:2017
(Main)Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
General Information
- Abstract
This European Standard specifies the characteristics and performance of prefabricated panels made of gypsum plasterboard facings complying with EN 520 and a cellular paperboard core intended to be used as a lightweight partition, lining and encasement for general use in buildings.
This standard covers the following characteristics: reaction to fire, water vapour permeability, flexural strength (breaking load) and thermal resistance to be measured according to the corresponding European test methods.
This Standard covers only prefabricated panels installed so that the core is not exposed.
The following performance characteristics are linked to systems assembled with prefabricated panels made of gypsum plasterboard facings and a cellular paperboard core: shear strength, fire resistance, direct airborne sound insulation, acoustic absorption and air permeability to be measured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions.
This document covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Building Industry.
It provides the assessment and verification of constancy of performance of the products.
- Status
- Published
- Publication Date
- 04-Jul-2017
- Withdrawal Date
- 29-Apr-2019
- Technical Committee
- CEN/TC 241 - Gypsum and gypsum based products
- Drafting Committee
- CEN/TC 241/WG 3 - Board products
- Current Stage
- 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
- Start Date
- 04-Mar-2023
- Completion Date
- 04-Mar-2023
Overview
EN 13915:2017 specifies definitions, requirements and test methods for prefabricated gypsum plasterboard panels with a cellular paperboard core. It applies to panels made from gypsum plasterboard facings (complying with EN 520) and a cellular paperboard core intended for use as lightweight partitions, linings and encasements in buildings. The standard addresses panel characteristics, associated system performance (when panels are assembled into systems), and the processes required for the assessment and verification of constancy of performance (AVCP).
Key topics and requirements
- Scope and installation: Applies only to prefabricated panels installed so that the cellular core is not exposed.
- Core panel characteristics: Defines requirements and test methods for:
- Reaction to fire (using European reaction-to-fire tests)
- Water vapour permeability (expressed as water vapour resistance factor)
- Flexural strength (breaking load / deflection under defined load)
- Thermal resistance (thermal conductivity measured per European methods)
- System-related characteristics (to be determined on assembled systems, if required): shear strength, fire resistance, direct airborne sound insulation, acoustic absorption, and air permeability. Tests should simulate end-use conditions where applicable.
- Additional product attributes: dimensions and tolerances, alignment, core adhesion, surface hardness, panel flatness, release of dangerous substances, marking, labelling and packaging.
- Testing and conformity: Sampling rules, detailed test procedures (e.g., alignment, deflection, core adhesion), and expression of results are included. The standard sets out AVCP procedures, type testing and Factory Production Control (FPC) requirements for ongoing quality assurance.
Practical applications and users
- Architects and specifiers: to select compliant prefabricated gypsum plasterboard panels for interior partitions, linings and encasements where lightweight construction and specific fire, thermal or acoustic performance are required.
- Manufacturers: to design, test and certify panel products in accordance with EN 13915:2017 and to implement FPC and AVCP processes for CE marking and market access in CEN member states.
- Test laboratories and certification bodies: to perform the required European test methods and AVCP tasks, and to verify constancy of performance.
- Contractors and façade/partition installers: to ensure correct installation (core not exposed) and to verify product performance for on-site compliance and acoustic/fire-resistance system testing.
Related standards
EN 13915 references and works alongside key European standards, for example:
- EN 520 (gypsum plasterboards)
- EN 13501-1 / EN 13501-2 (fire classification)
- EN 13823 (SBI reaction-to-fire test)
- EN 12664 (thermal resistance measurement)
- EN ISO 354, ISO 717-1, EN ISO 10140-2 (acoustic test methods)
EN 13915:2017 is essential for professionals specifying or producing gypsum-based prefabricated panels where reliable fire, thermal and moisture performance - and demonstrated conformity - are required.
Relations
- Effective Date
- 07-Oct-2015
- Effective Date
- 09-Feb-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
EN 13963:2014 - Jointing materials for gypsum boards - Definitions, requirements and test methods - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
EN ISO 354:2003 - Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 13915:2017 is a standard published by the European Committee for Standardization (CEN). Its full title is "Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods". This standard covers: This European Standard specifies the characteristics and performance of prefabricated panels made of gypsum plasterboard facings complying with EN 520 and a cellular paperboard core intended to be used as a lightweight partition, lining and encasement for general use in buildings. This standard covers the following characteristics: reaction to fire, water vapour permeability, flexural strength (breaking load) and thermal resistance to be measured according to the corresponding European test methods. This Standard covers only prefabricated panels installed so that the core is not exposed. The following performance characteristics are linked to systems assembled with prefabricated panels made of gypsum plasterboard facings and a cellular paperboard core: shear strength, fire resistance, direct airborne sound insulation, acoustic absorption and air permeability to be measured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions. This document covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Building Industry. It provides the assessment and verification of constancy of performance of the products.
This European Standard specifies the characteristics and performance of prefabricated panels made of gypsum plasterboard facings complying with EN 520 and a cellular paperboard core intended to be used as a lightweight partition, lining and encasement for general use in buildings. This standard covers the following characteristics: reaction to fire, water vapour permeability, flexural strength (breaking load) and thermal resistance to be measured according to the corresponding European test methods. This Standard covers only prefabricated panels installed so that the core is not exposed. The following performance characteristics are linked to systems assembled with prefabricated panels made of gypsum plasterboard facings and a cellular paperboard core: shear strength, fire resistance, direct airborne sound insulation, acoustic absorption and air permeability to be measured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions. This document covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Building Industry. It provides the assessment and verification of constancy of performance of the products.
EN 13915:2017 is classified under the following ICS (International Classification for Standards) categories: 91.100.10 - Cement. Gypsum. Lime. Mortar. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13915:2017 has the following relationships with other standards: It is inter standard links to EN 13915:2007, ISO 7892:1988, EN ISO 12572:2016, EN ISO 10140-2:2010, EN 520:2004+A1:2009, EN 13501-2:2016, EN ISO 11925-2:2010, EN 13963:2014, EN 12664:2001, EN ISO 10456:2007, EN 13501-1:2007+A1:2009, EN ISO 717-1:2013, EN ISO 354:2003, EN 13823:2010+A1:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13915:2017 is associated with the following European legislation: EU Directives/Regulations: 305/2011; Standardization Mandates: M/106. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13915:2017 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gipsplatten-Wandbaufertigtafeln mit einem Kartonwabenkern - Begriffe, Anforderungen und PrüfverfahrenPanneaux de cloison préfabriqués en plaques de plâtre à âme cellulaire en carton - Définitions, prescriptions et méthodes d'essaiPrefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:EN 13915:2017SIST EN 13915:2017en,fr,de01-september-2017SIST EN 13915:2017SLOVENSKI
STANDARDSIST EN 13915:20071DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13915
July
t r s y ICS
{ sä s r rä s r Supersedes EN
s u { s wã t r r yEnglish Version
Prefabricated gypsum plasterboard panels with a cellular paperboard core æ Definitionsá requirements and test methods Panneaux de cloison préfabriqués en plaques de plâtre à âme cellulaire en carton æ Définitionsá exigences et méthodes d 5essai
GipsplattenæWandbaufertigtafeln mit einem Kartonwabenkern æ Begriffeá Anforderungen und Prüfverfahren This European Standard was approved by CEN on
t { July
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u { s wã t r s y ESIST EN 13915:2017
Sampling procedure for testing . 21 A.1 General . 21 A.2 Sampling procedure . 21 Annex B (normative)
Mounting and fixing in the test according to EN 13823 (SBI test) . 22 B.1 General . 22 Annex ZA (informative)
Relationship of this European Standard with Regulation (EU) No.305/2011 . 24 ZA.1 Scope and relevant characteristics . 24 ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 25 ZA.3 Assignment of AVCP tasks . 25 Bibliography . 27
e < 70 30 70
e
80 15 4.5 Direct airborne sound insulation NOTE Direct airborne sound insulation is a characteristic dependent on the assembled system and not of the product in isolation. When the manufacturer wishes to declare the performance for the direct airborne sound insulation of an installed system including prefabricated gypsum plasterboard panels, the performance of the system shall be determined according to EN ISO 10140-2 or EN ISO 717-1 as appropriate. 4.6 Acoustic absorption NOTE Acoustic absorption is a characteristic dependent on an assembled system and not of the product in isolation. When the manufacturer wishes to declare the performance of prefabricated gypsum plasterboard panels to be used for acoustic conditioning, the performance of acoustic absorption shall be determined according to EN ISO 354. SIST EN 13915:2017
...