EN 14896:2006
(Main)Bitumen and bituminous binders - Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders - Rotating spindle viscometer method
General Information
- Abstract
This European Standard specifies a method for the determination of the dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders, by means of a coaxial viscometer. There are standard application temperatures quoted, although the dynamic viscosity can be measured at other temperatures if required. Similarly, viscosity is quoted at standard rates of shear, although additional measurements can be taken at varying shear rates if required.
NOTE Some bituminous materials may exhibit non-Newtonian behaviour under the conditions of this method. Since non-Newtonian viscosity values are not unique material properties, but reflect the behaviour of the fluid and the measurement system, it should be recognised that measurements made by this method may not always predict performance under the conditions of use. Comparisons between non-Newtonian viscosities should be made only for measurements under similar conditions of shear stress and shear rate.
WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
- Status
- Withdrawn
- Publication Date
- 05-Sep-2006
- Withdrawal Date
- 09-Mar-2010
- Technical Committee
- CEN/TC 336 - Bituminous binders
- Drafting Committee
- CEN/TC 336/WG 2 - Emulsions and fluxed bitumens
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 10-Mar-2010
- Completion Date
- 10-Mar-2010
- Directive
- Harmonized Standard305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Not Harmonized89/106/EEC - Construction products
Relations
- Effective Date
- 08-Jun-2022
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Element Materials Technology
Materials testing and product certification.
Sponsored listings
Frequently Asked Questions
EN 14896:2006 is a standard published by the European Committee for Standardization (CEN). Its full title is "Bitumen and bituminous binders - Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders - Rotating spindle viscometer method". This standard covers: This European Standard specifies a method for the determination of the dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders, by means of a coaxial viscometer. There are standard application temperatures quoted, although the dynamic viscosity can be measured at other temperatures if required. Similarly, viscosity is quoted at standard rates of shear, although additional measurements can be taken at varying shear rates if required. NOTE Some bituminous materials may exhibit non-Newtonian behaviour under the conditions of this method. Since non-Newtonian viscosity values are not unique material properties, but reflect the behaviour of the fluid and the measurement system, it should be recognised that measurements made by this method may not always predict performance under the conditions of use. Comparisons between non-Newtonian viscosities should be made only for measurements under similar conditions of shear stress and shear rate. WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
This European Standard specifies a method for the determination of the dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders, by means of a coaxial viscometer. There are standard application temperatures quoted, although the dynamic viscosity can be measured at other temperatures if required. Similarly, viscosity is quoted at standard rates of shear, although additional measurements can be taken at varying shear rates if required. NOTE Some bituminous materials may exhibit non-Newtonian behaviour under the conditions of this method. Since non-Newtonian viscosity values are not unique material properties, but reflect the behaviour of the fluid and the measurement system, it should be recognised that measurements made by this method may not always predict performance under the conditions of use. Comparisons between non-Newtonian viscosities should be made only for measurements under similar conditions of shear stress and shear rate. WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
EN 14896:2006 is classified under the following ICS (International Classification for Standards) categories: 75.140 - Waxes, bituminous materials and other petroleum products; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 14896:2006 has the following relationships with other standards: It is inter standard links to EN 13302:2010, EN ISO 1622-2:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 14896:2006 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 14896:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen and bituminous binders - Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders - Rotating spindle viscometer methodELWXPHQVNLKRWDFLMVNLPYUHWHQRPBitumes et liants bitumineux - Détermination de la viscosité dynamique des émulsions bitumineuses, des liants bitumineux fluidifiés et fluxés - Méthode du viscosimetre a mobile tournantBitumen und bitumenhaltige Bindemittel - Dynamische Viskosität von Bitumenemulsionen, verschnittenen und gefluxten bitumenhaltigen Bindemitteln - Viskosimeter-Verfahren mit rotierender SpindelTa slovenski standard je istoveten z:EN 14896:2006SIST EN 14896:2006en91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:SLOVENSKI
STANDARDSIST EN 14896:200601-december-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14896September 2006ICS 75.140; 91.100.50 English VersionBitumen and bituminous binders - Dynamic viscosity ofbituminous emulsions, cut-back and fluxed bituminous binders -Rotating spindle viscometer methodBitumes et liants bitumineux - Détermination de la viscositédynamique des émulsions bitumineuses, des liantsbitumineux fluidifiés et fluxés - Méthode du viscosimètre àmobile tournantBitumen und bitumenhaltige Bindemittel - DynamischeViskosität von Bitumenemulsionen, verschnittenen undgefluxten bitumenhaltigen Bindemitteln - Viskosimeter-Verfahren mit rotierender SpindelThis European Standard was approved by CEN on 3 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14896:2006: E
N. m-2, kg. m-1. s-2 or Pa 3.3 dynamic viscosity ratio between the applied shear stress and the shear rate NOTE Dynamic viscosity is the measurement of the resistance to flow of the liquid. The SI unit of dynamic viscosity is the Pascal.second (Pa.s), the milliPascal.second (mPa.s) is a frequently used sub-unit. 3.4 Newtonian fluid fluid having a viscosity that is independent of the rate of shear
...