SIST EN 14187-1:2017
(Main)Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure
Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure
This European Standard describes the determination of the rate of cure of cold applied joint sealants indicated by the build-up of the tensile modulus during the cure.
Kalt verarbeitbare Fugenmassen - Teil 1: Prüfverfahren zur Bestimmung des Aushärtungsgrades
Diese Europäische Norm beschreibt die Bestimmung des Aushärtungsgrades von kalt verarbeitbaren Fugen¬massen, der durch den Anstieg des Zugspannungswertes während der Aushärtung angezeigt wird.
Mastics pour joints appliqués à froid - Méthodes d'essai - Partie 1: Détermination du taux de polymérisation
Cette Norme européenne décrit la détermination du taux de polymérisation des mastics pour joints appliqués à froid qui se traduit par l'acquisition de propriétés de résistance à la traction au cours de la polymérisation.
Hladno nanosljive tesnilne mase za stike - Preskusne metode - 1. del: Ugotavljanje stopnje strditve
Ta evropski standard se uporablja za ugotavljanje stopnje strditve hladno nanosljivih tesnilnih mas za stike s kopičenjem nateznih modulov med strjevanjem.
General Information
- Status
- Published
- Public Enquiry End Date
- 29-Dec-2014
- Publication Date
- 10-Aug-2017
- Technical Committee
- CES - Roads
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 02-Aug-2017
- Due Date
- 07-Oct-2017
- Completion Date
- 11-Aug-2017
Relations
- Effective Date
- 01-Sep-2017
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
SIST EN 14188-2:2005 - Joint fillers and sealants - Part 2: Specifications for cold applied sealants - Effective Date
- 28-Jan-2026
Overview
SIST EN 14187-1:2017 is a European standard that specifies a test method for determining the rate of cure of cold applied joint sealants. The standard, developed by the Slovenski inštitut za standardizacijo (SIST) in alignment with CEN, outlines a procedure to measure the build-up of tensile modulus as the sealant cures. This method ensures reliable evaluation of curing performance, which is essential for quality control in road construction and building projects. Accurate determination of cure rate helps verify product suitability for various environmental and structural requirements.
Key Topics
- Cold Applied Joint Sealants: Materials used to seal joints without the need for heat during application, widely employed in road and building construction.
- Rate of Cure: The speed at which the sealant hardens or reaches its final properties, assessed by tracking changes in tensile modulus over time.
- Test Methodology: Involves preparing standardized test specimens, conditioning them, and utilizing a tensile test machine to evaluate tensile modulus development.
- Sample Preparation: Requires specific sample supports, spacers, and anti-adherent substrates to produce consistent results.
- Reporting Requirements: Mandates detailed documentation, including product type, batch, testing parameters, cure data, and deviations from standard conditions.
Applications
- Road Construction: Cold applied joint sealants are critical in expansion joints, cracks, and seams of asphalt and concrete pavements. The determination of cure rate ensures the sealant achieves required mechanical properties before exposure to traffic loads and environmental stresses.
- Building and Civil Engineering: Used in structural joints, facades, and waterproofing, these sealants must cure adequately to prevent water ingress and maintain structural integrity.
- Quality Control: Manufacturers and independent labs use this standard to assess batch-to-batch consistency and compliance with technical specifications, thereby supporting product certification and market access.
- Performance Verification: The test method supports research and development in improving sealant formulations by providing data on curing behavior under defined conditions.
Related Standards
- EN 14187 Series: Covers a comprehensive range of test methods for cold applied joint sealants, including determination of tack free time (EN 14187-2), self-leveling properties (EN 14187-3), chemical resistance (EN 14187-4, EN 14187-6), hydrolysis resistance (EN 14187-5), flame resistance (EN 14187-7), and UV resistance (EN 14187-8).
- EN ISO 8340: Details the determination of tensile properties at maintained extension for joint sealants.
- EN ISO 6927: Provides terminology and definitions relevant to sealants in building and civil engineering works.
- EN 13880-12: Specifies the method for preparing concrete test blocks for bond testing, used as supports in curing rate determination.
Practical Value
Adopting SIST EN 14187-1:2017 ensures consistent evaluation of cold applied joint sealants, supporting durability, safety, and reliability in road and building projects. By standardizing the cure rate determination method, the standard enables transparent comparison across products and facilitates compliance with European regulatory requirements regarding construction materials. This contributes to improved project outcomes and long-term infrastructure performance.
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Zavod za gradbeništvo Slovenije (ZAG) - Inšpekcija
ZAG inspection body for construction products, structures, and materials.
Sponsored listings
Frequently Asked Questions
SIST EN 14187-1:2017 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Cold applied joint sealants - Test methods - Part 1: Determination of rate of cure". This standard covers: This European Standard describes the determination of the rate of cure of cold applied joint sealants indicated by the build-up of the tensile modulus during the cure.
This European Standard describes the determination of the rate of cure of cold applied joint sealants indicated by the build-up of the tensile modulus during the cure.
SIST EN 14187-1:2017 is classified under the following ICS (International Classification for Standards) categories: 91.100.50 - Binders. Sealing materials; 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14187-1:2017 has the following relationships with other standards: It is inter standard links to SIST EN 14187-1:2004, SIST EN 13880-12:2004, SIST EN ISO 8340:2005, SIST EN ISO 6927:2021, SIST EN 14188-2:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 14187-1:2017 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hladno nanosljive tesnilne mase za stike - Preskusne metode - 1. del: Ugotavljanje stopnje strditveKalt verarbeitbare Fugenmassen - Teil 1: Prüfverfahren zur Bestimmung des AushärtungsgradesMastics pour joints appliqués à froid - Méthodes d'essai - Partie 1: Détermination du taux de polymérisationCold applied joint sealants - Test methods - Part 1: Determination of rate of cure93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 14187-1:2017SIST EN 14187-1:2017en,fr,de01-september-2017SIST EN 14187-1:2017SLOVENSKI
STANDARDSIST EN 14187-1:20041DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14187-1
June
t r s y ICS
{ uä r z rä t r Supersedes EN
s v s z yæ sã t r r uEnglish Version
Cold applied joint sealants æ Test methods æ Part
sã Determination of rate of cure Mastics pour joints appliqués à froid æ Méthodes d 5essai æ Partie
sã Détermination du taux de polymérisation
Kalt verarbeitbare Fugenmassen æ Prüfverfahren æ Teil
sã Bestimmung des Aushärtungsgrades This European Standard was approved by CEN on
s y April
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v s z yæ sã t r s y ESIST EN 14187-1:2017
...