oSIST prEN 14187-9:2014

SLOVENSKI STANDARD
01-november-2014
Hladno nanosljive tesnilne mase za stike - Preskusne metode - 9. del: Preskušanje
funkcionalnosti tesnilnih mas za stike
Cold applied joint sealants - Test methods - Part 9: Function testing of joint sealants
Kalt verarbeitbare Fugenmassen - Prüfverfahren - Teil 9: Funktionsprüfung von
Fugenmassen
Produits de scellement de joint appliqués à froid - Méthodes d'essais - Partie 9 : Test
fonctionnel sur scellement de joints
Ta slovenski standard je istoveten z: prEN 14187-9
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
DRAFT
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2014
ICS 93.080.20 Will supersede EN 14187-9:2006
English Version
Cold applied joint sealants - Test methods - Part 9: Function
testing of joint sealants
Produits de scellement de joint appliqués à froid - Méthodes Kalt verarbeitbare Fugenmassen - Prüfverfahren - Teil 9:
d'essais - Partie 9 : Test fonctionnel sur scellement de joints Funktionsprüfung von Fugenmassen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 227.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14187-9:2014 E
worldwide for CEN national Members.

Contents
Page
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle .4
5 Apparatus and materials .4
5.1 Concrete test blocks .4
5.2 Tensile/compression test rig .4
5.3 Climate chamber .5
5.4 Temperature indicator .5
6 Preparation of the test specimens .5
7 Procedure .6
7.1 Conditioning cycle .6
7.2 After conditioning .8
7.3 Test procedure .8
8 Calculation and expression of results . 10
9 Test report . 10
Foreword
This document (prEN 14187-9:2014) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 14187-9:2006.
This European Standard is one of a series of standards as listed below:
EN 14187-1, Cold applied joint sealants — Test methods — Part 1: Determination of rate of cure.
EN 14187-2, Cold applied joint sealants — Test methods — Part 2: Determination of tack free time.
EN 14187-3, Cold applied joint sealants — Test methods — Part 3: Determination of self-levelling properties.
EN 14187-4, Cold applied joint sealants — Test methods — Part 4: Determination of the change in mass and
volume after immersion in test fuels and liquid chemicals.
EN 14187-5, Cold applied joint sealants — Test methods — Part 5: Determination of the resistance to
hydrolysis.
EN 14187-6, Cold applied joint sealants — Test methods — Part 6: Determination of the adhesion/cohesion
properties after immersion in test fuels and liquid chemicals.
EN 14187-7, Cold applied joint sealants — Test methods — Part 7: Determination of the resistance to flame.
EN 14187-8, Cold applied joint sealants — Test methods — Part 8: Determination of the artificial weathering
by UV-irradiation.
EN 14187-9, Cold applied joint sealants — Test methods — Part 9: Function testing of joint sealants.
1 Scope
This European Standard specifies a function test for cold applied joint sealants intended for use in joints in
roads and airfield pavements in cold climate areas where the total joint movement can be greater than 35 %
and the temperature can go below –25 ºC.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 13880-12, Hot applied joint sealants — Part 12: Test method for the manufacture of concrete test blocks
for bond testing (recipe methods)
EN 14188-4, Joint fillers and sealants — Part 4: Specifications for primers to be used with joint sealants
EN 14187-2, Cold applied joint sealants — Part 2: Test method for the determination of tack free time
EN ISO 6927, Buildings and civi
...