SIST EN 1504-1:2005
(Main)Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions
This European Standard defines terms relating to products and systems for repair, for use in maintenance and protection, restoration and strengthening of concrete structures.
Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Güteüberwachung und Beurteilung der Konformität - Teil 1: Definitionen
Diese Europäische Norm definiert Begriffe für Produkte und Systeme für die Instandsetzung, die Verwendung bei Unterhaltung und Schutz sowie Wiederherstellung und Verstärkung von Betontragwerken.
Produits et systemes pour la protection et la réparation des structures en béton - Définitions, prescriptions, maîtrise de la qualité et évaluation de la conformité - Partie 1: Définitions
Le présent document définit les termes relatifs aux produits et systèmes utilisés pour la réparation, la
maintenance et la protection, la restauration et le renforcement des structures en béton.
Proizvodi in sistemi za zaščito in obnovo betonskih konstrukcij – Definicije, zahteve, kontrola kakovosti in ovrednotenje skladnosti – 1. del: Definicije
Ta evropski standard opredeljuje izraze, ki se nanašajo na proizvode in sisteme za popravilo, uporabo pri vzdrževanju in zaščiti ter pri obnovi in ojačenju betonskih konstrukcij.
General Information
- Status
- Published
- Publication Date
- 30-Nov-2005
- Technical Committee
- BBB - Concrete, reinforced concrete and prestressed concrete
- Current Stage
- 6100 - Translation of adopted SIST standards (Adopted Project)
- Start Date
- 02-Feb-2018
- Due Date
- 01-Feb-2019
- Completion Date
- 21-Sep-2018
Buy Documents
Relations
- Effective Date
- 01-Dec-2005
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
SIST EN 1504-1:2005 establishes a comprehensive vocabulary for products and systems used in the protection and repair of concrete structures. Issued by the Slovenski inštitut za standardizacijo (SIST), this standard is part of the wider EN 1504 series, which outlines definitions, requirements, quality control, and conformity evaluation for materials and systems in concrete repair, maintenance, restoration, and strengthening. A clear understanding of these terms ensures consistent communication, specification, and application in projects involving structural concrete in construction and civil engineering.
Key Topics
- Clear Definitions: The standard provides precise definitions for terms related to products and systems for concrete repair and protection. This includes components such as batches, declared values, identification and performance tests, and system constituents.
- Categories of Products and Systems: It distinguishes main categories such as:
- Anchoring products and systems
- Injection products and systems
- Structural and non-structural repair products
- Reinforcement protection products
- Structural bonding products
- Surface protection products and systems
- Constituents and Chemical Types: The document includes definitions for additions, additives, admixtures, binders, polymer-modified mortars or concretes, impregnation treatments, and reactive polymers.
- Standardized Language: By aligning terminology across manufacturers, contractors, and specifiers, the standard facilitates uniformity and compatibility in the selection and use of repair products.
Applications
SIST EN 1504-1:2005 is practical for a variety of stakeholders in concrete construction and repair, ensuring reliable specification and documentation:
- Design and Specification: Enables engineers and architects to specify repair materials and systems with unambiguous terminology, reducing risk of miscommunication in technical documentation.
- Manufacturing and Quality Control: Assists manufacturers in labeling, documentation, and communication regarding the properties, composition, and performance of their products.
- Site Application and Inspection: Supports contractors and inspectors in understanding system requirements, expected performance, and how to verify conformity through identification and performance tests.
- Training and Education: Provides a foundation for training manuals, educational materials, and technical communication on concrete maintenance and restoration technologies.
Examples of relevant use cases include:
- Restoring damaged or deteriorated concrete in bridges, tunnels, and buildings
- Applying protective coatings or corrosion inhibitors
- Executing structural upgrades or crack injections to extend service life
Adhering to this standard promotes reliability, safety, and quality in repair and protection of concrete structures, which is critical for sustainability and lifecycle management within the built environment.
Related Standards
SIST EN 1504-1:2005 forms the basis for subsequent parts in the EN 1504 series, which offer further detail on the various aspects of concrete protection and repair:
- EN 1504-2: Surface protection systems for concrete
- EN 1504-3: Structural and non-structural concrete repairs
- EN 1504-4: Structural bonding systems
- EN 1504-5: Concrete injection materials and systems
- prEN 1504-6/7: Anchoring of steel bars and reinforcement corrosion protection
- EN 1504-8: Quality control and evaluation of conformity procedures
- ENV 1504-9: General principles for the use of products and systems
- EN 1504-10: Application procedures and site quality control
Other foundational material references include:
- EN 197-1: Specification for common cements
- EN 413-1: Masonry cement specifications
- EN 459-1: Definitions and specifications for building lime
By utilizing SIST EN 1504-1:2005 and its related standards, industry professionals can ensure thorough, traceable, and high-quality approaches in the maintenance and protection of concrete structures.
Buy Documents
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
SIST EN 1504-1:2005 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions". This standard covers: This European Standard defines terms relating to products and systems for repair, for use in maintenance and protection, restoration and strengthening of concrete structures.
This European Standard defines terms relating to products and systems for repair, for use in maintenance and protection, restoration and strengthening of concrete structures.
SIST EN 1504-1:2005 is classified under the following ICS (International Classification for Standards) categories: 01.040.91 - Construction materials and building (Vocabularies); 91.080.40 - Concrete structures. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1504-1:2005 has the following relationships with other standards: It is inter standard links to SIST EN 1504-1:2002, SIST EN 13687-5:2002, SIST EN 15184:2006, SIST EN ISO 12696:2022, SIST EN 12617-4:2002, SIST EN 1504-4:2005, SIST EN 1504-6:2006, SIST EN 1504-5:2013, SIST EN 13584:2003, SIST EN 13687-2:2002, SIST EN 14879-1:2005, SIST EN 1504-9:2008, SIST EN 1799:2000, SIST EN 1504-10:2017, SIST EN 1504-7:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 1504-1:2005 is associated with the following European legislation: Standardization Mandates: M/128. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 1504-1:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.'HILQLFLMHProdukte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Güteüberwachung und Beurteilung der Konformität - Teil 1: DefinitionenProduits et systemes pour la protection et la réparation des structures en béton - Définitions, prescriptions, maîtrise de la qualité et évaluation de la conformité - Partie 1: DéfinitionsProducts and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions91.080.40Betonske konstrukcijeConcrete structures01.040.91Gradbeni materiali in gradnja (Slovarji)Construction materials and building (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 1504-1:2005SIST EN 1504-1:2005en01-december-2005SIST EN 1504-1:2005SLOVENSKI
STANDARD1DGRPHãþDSIST EN 1504-1:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1504-1July 2005ICS 91.080.40; 01.040.91Supersedes EN 1504-1:1998
English VersionProducts and systems for the protection and repair of concretestructures - Definitions, requirements, quality control andevaluation of conformity - Part 1: DefinitionsProduits et systèmes pour la protection et la réparation desstructures en béton - Définitions, prescriptions, maîtrise dela qualité et évaluation de la conformité - Partie 1:DéfinitionsProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Definitionen,Anforderungen, Güteüberwachung und Beurteilung derKonformität - Teil 1: DefinitionenThis European Standard was approved by CEN on 2 June 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1504-1:2005: ESIST EN 1504-1:2005
...
ba
SLOVENSKI SIST EN 1504-1
STANDARD december 2005
Proizvodi in sistemi za zaščito in obnovo betonskih konstrukcij – Definicije,
zahteve, kontrola kakovosti in ovrednotenje skladnosti – 1. del: Definicije
Products and systems for the protection and repair of concrete structures –
Definitions, requirements, quality control and evaluation of conformity –
Part 1: Definitions
Produits et systemes pour la protection et la réparation des structures en béton –
Définitions, prescriptions, maîtrise de la qualité et évaluation de la conformité –
Partie 1: Définitions
Produkte und Systeme für den Schutz und die Instandsetzung von
Betontragwerken – Definitionen, Anforderungen, Güteüberwachung und
Beurteilung der Konformität – Teil 1: Definitionen
Referenčna oznaka
ICS 01.040.91; 91.080.40 SIST EN 1504-1:2005 (sl)
Nadaljevanje na straneh II in od 1 do 8
© 2018-10. Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega standarda ni dovoljeno.
SIST EN 1504-1 : 2005
NACIONALNI UVOD
Standard SIST EN 1504-1 (sl), Proizvodi in sistemi za zaščito in obnovo betonskih konstrukcij –
Definicije, zahteve, kontrola kakovosti in ovrednotenje skladnosti – 1. del: Definicije, 2005, ima status
slovenskega standarda in je istoveten evropskemu standardu EN 1504-1 (en, de, fr), Products and
systems for the protection and repair of concrete structures – Definitions, requirements, quality control
and evaluation of conformity – Part 1: Definitions, 2005.
Ta standard nadomešča SIST EN 1504-1:2002.
NACIONALNI PREDGOVOR
Evropski standard EN 1504-1:2005 je pripravil tehnični odbor Evropskega komiteja za standardizacijo
CEN/TC 104 Beton in sorodni proizvodi. Slovenski standard SIST EN 1504-1:2005 je prevod
evropskega standarda EN 1504-1:2005. V primeru spora glede besedila slovenskega prevoda v tem
standardu je odločilen izvirni evropski standard v enem izmed treh uradnih jezikov CEN. Slovensko
izdajo standarda je pripravil tehnični odbor SIST/TC BBB Beton, armirani beton in prednapeti beton.
Odločitev za privzem tega standarda je v oktobru 2005 sprejel SIST/TC BBB Beton, armirani beton in
prednapeti beton.
OSNOVA ZA IZDAJO STANDARDA
– privzem standarda EN 1504-1:2005
PREDHODNA IZDAJA
– SIST EN 1504-1:2002, Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Definicije,
zahteve, kontrola kakovosti in ovrednotenje skladnosti – 1. del: Definicije
OPOMBE
– Povsod, kjer se v besedilu standarda uporablja izraz "evropski standard", v SIST EN 1504-1:2005
to pomeni "slovenski standard".
– Uvod in nacionalni predgovor nista sestavni del standarda.
– Ta nacionalni dokument je istoveten EN 1504-1:2005 in je objavljen z dovoljenjem
CEN-CENELEC
Upravni center
Avenue Marnix 17
B-1000 Bruselj
This national document is identical with EN 1504-1:2005 and is published with the permission of
CEN-CENELEC
Management Centre
Avenue Marnix 17
B-1000 Brussels
II
EVROPSKI STANDARD EN 1504-1
EUROPEAN STANDARD
NORME EUROPÉENNE
julij 2005
EUROPÄISCHE NORM
ICS 91.080.40; 01.040.91 Nadomešča EN 1504-1:1998
Slovenska izdaja
Proizvodi in sistemi za zaščito in obnovo betonskih konstrukcij –
Definicije, zahteve, kontrola kakovosti in ovrednotenje skladnosti –
1. del: Definicije
Products and systems for the Produits et systemes pour la Produkte und Systeme für den
protection and repair of concrete protection et la réparation des Schutz und die Instandsetzung
structures – Definitions, structures en béton – von Betontragwerken –
requirements, quality control Définitions, prescriptions, Definitionen, Anforderungen,
and evaluation of conformity – maîtrise de la qualité et Güteüberwachung und
Part 1: Definitions évaluation de la conformité – Beurteilung der Konformität –
Partie 1: Définitions Teil 1: Definitionen
Ta evropski standard je CEN sprejel 2. junija 2005.
Člani CEN morajo izpolnjevati notranje predpise CEN/CENELEC, ki določajo pogoje, pod katerimi
dobi ta standard status nacionalnega standarda brez kakršnihkoli sprememb. Najnovejši seznami teh
nacionalnih standardov in njihovi bibliografski podatki se na zahtevo lahko dobijo pri Centralnem
sekretariatu ali kateremkoli članu CEN.
Ta evropski standard obstaja v treh uradnih izdajah (angleški, francoski in nemški). Izdaje v drugih
jezikih, ki jih člani CEN na lastno odgovornost prevedejo in izdajo ter prijavijo pri Centralnem
sekretariatu CEN, veljajo kot uradne izdaje.
Člani CEN so nacionalni organi za standarde Avstrije, Belgije, Cipra, Češke republike, Danske,
Estonije, Finske, Francije, Grčije, Islandije, Irske, Italije, Latvije, Litve, Luksemburga, Madžarske,
Malte, Nemčije, Nizozemske, Norveške, Poljske, Portugalske, Slovaške, Slovenije, Španije, Švedske,
Švice in Združenega kraljestva.
CEN
Evropski komite za standardizacijo
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
Upravni center: rue de Strassart, 36 B-1050 Bruselj
© 2005 CEN Lastnice avtorskih pravic so vse države članice CEN. Ref. oznaka EN 1504-1:2005 E
SIST EN 1504-1 : 2005
VSEBINA Stran
Predgovor . 3
1 Področje standarda . 4
2 Zveza s standardi . 4
3 Izrazi in definicije . 4
Literatura. 8
SIST EN 1504-1 : 2005
Predgovor
Ta evropski standard (EN 1504-1:2005) je pripravil tehnični odbor CEN/TC 104 "Beton in sorodni
proizvodi", katerega sekretariat vodi DIN.
Ta evropski standard mora dobiti status nacionalnega standarda z objavo istovetnega besedila ali z
razglasitvijo najpozneje do januarja 2006, nacionalne standarde, ki so v nasprotju s tem standardom,
pa je treba umakniti najpozneje do decembra 2008.
Ta dokument nadomešča EN 1504-1:1998.
Standard je bil razvit v pododboru 8 "Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij"
(sekretariat AFNOR).
Ta dokument je del skupine standardov, ki obravnavajo splošne zadeve o proizvodih in sistemih za
popravilo in zaščito betonskih konstrukcij.
Drugi deli tega standarda so:
‒ EN 1504-2, Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Definicije, zahteve,
kontrola kakovosti in vrednotenje skladnosti – 2. del: Sistemi za zaščito površine betona
‒ EN 1504-3, Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Definicije, zahteve,
kontrola kakovosti in vrednotenje skladnosti – 3. del: Konstrukcijska in nekonstrukcijska popravila
‒ EN 1504-4, Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Definicije, zahteve,
kontrola kakovosti in vrednotenje skladnosti – 4. del: Konstrukcijsko povezovanje
‒ EN 1504-5, Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Definicije, zahteve,
kontrola kakovosti in vrednotenje skladnosti – 5. del: Injektiranje betona
‒ prEN 1504-6, Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Definicije, zahteve,
kontrola kakovosti in vrednotenje skladnosti – 6. del: Sidranje armaturne palice
‒ prEN 1504-7, Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Definicije, zahteve,
kontrola kakovosti in vrednotenje skladnosti – 7. del: Zaščita armature proti koroziji
‒ EN 1504-8, Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Definicije, zahteve,
kontrola kakovosti in vrednotenje skladnosti – 8. del: Kontrola kakovosti in ovrednotenje skladnosti
‒ ENV 1504-9, Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Definicije, zahteve,
kontrola kakovosti in vrednotenje skladnosti – 9. del: Splošna načela za uporabo proizvodov in
sistemov
‒ EN 1504-10, Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Definicije, zahteve,
kontrola kakovosti in vrednotenje skladnosti – Uporaba proizvodov in sistemov na terenu in kontrola
kakovosti del
V skladu z notranjimi predpisi CEN/CENELEC morajo ta evropski standard obvezno uvesti nacionalne
organizacije za standarde naslednjih držav: Avstrije, Belgije, Cipra, Češke republike, Danske, Estonije,
Finske, Francije, Grčije, Islandije, Irske, Italije, Latvije, Litve, Luksemburga, Madžarske, Malte,
Nemčije, Nizozemske, Norve
...