Soil and waste — Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection

This document specifies the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography with spectrophotometric detection. This method can be used to determine Cr(VI)-mass fractions in solids higher than 0,1 mg/kg. NOTE In case of reducing or oxidising waste matrix no valid Cr(VI) content can be reported.

Déchets et sols — Dosage du chrome(VI) dans les matériaux solides par digestion alcaline et chromatographie ionique avec détection spectrophotométrique

Le présent document spécifie le dosage du Cr(VI) dans les déchets solides et les sols par digestion alcaline et chromatographie ionique avec détection spectrophotométrique. Cette méthode est applicable pour déterminer les fractions massiques de Cr(VI) dans les solides supérieures à 0,1 mg/kg. NOTE Il n’est pas possible de consigner une teneur en Cr(VI) valable dans un rapport lorsque la matrice de déchets est réductrice ou oxydante.

General Information

Status
Published
Publication Date
07-Sep-2025
Current Stage
6060 - International Standard published
Start Date
08-Sep-2025
Due Date
18-Oct-2025
Completion Date
08-Sep-2025
Ref Project

Relations

Standard
ISO 15192:2025 - Soil and waste — Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection Released:8. 09. 2025
English language
25 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 15192:2025 - Déchets et sols — Dosage du chrome(VI) dans les matériaux solides par digestion alcaline et chromatographie ionique avec détection spectrophotométrique Released:8. 09. 2025
French language
27 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/FDIS 15192 - Soil and waste — Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection Released:3. 06. 2025
English language
25 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
REDLINE ISO/FDIS 15192 - Soil and waste — Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection Released:3. 06. 2025
English language
25 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO/FDIS 15192 - Déchets et sols — Dosage du chrome(VI) dans les matériaux solides par digestion alcaline et chromatographie ionique avec détection spectrophotométrique Released:9. 07. 2025
French language
27 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


International
Standard
ISO 15192
Third edition
Soil and waste — Determination
2025-09
of chromium(VI) in solid
material by alkaline digestion
and ion chromatography with
spectrophotometric detection
Déchets et sols — Dosage du chrome(VI) dans les matériaux
solides par digestion alcaline et chromatographie ionique avec
détection spectrophotométrique
Reference number
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Safety remarks . 1
5 Principle . 2
5.1 Digestion .2
5.2 Determination .2
5.3 Interferences and sources of error .2
6 Apparatus . 3
7 Reagents . 3
8 Sample pretreatment . 6
9 Alkaline digestion procedure . 6
9.1 General .6
9.2 Preparation of test solutions using a hotplate or heating block .6
10 Analytical procedure . 7
10.1 General information.7
10.2 Instrumental set-up .7
10.3 Calibration .7
10.4 Test solution measurement .7
10.5 Quality control .8
10.5.1 General .8
10.5.2 Blank test solution .8
10.5.3 Verification of method .8
10.5.4 Duplicate samples.8
10.5.5 Soluble Cr(VI) spiked samples .8
10.5.6 Cr(III) spiked samples .9
10.5.7 Interpretation of quality control data .9
11 Calculation . 9
12 Expression of results .10
13 Test report . 10
Annex A (informative) Ion chromatographic system .11
Annex B (informative) Requirements for test portion preparation .13
Annex C (informative) Validation . 14
Annex D (informative) Background on methods for the determination of Cr(VI) in solid samples . 19
Bibliography .23

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO’s adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 190, Soil quality, Subcommittee SC 3, Chemical
and physical characterization, in collaboration with the European Committee for Standardization (CEN)
Technical Committee CEN/TC 444, Environmental characterization of solid matrices, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 15192:2021), which has been technically
revised.
The main changes are as follows:
— integration of the determination of the total chromium in the alkaline digestion solution;
— addition of barium chromate as an alternative to lead chromate for the verification of the method in 10.5.3;
— the text has been editorially revised, including updating of references.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
Introduction
Under environmental conditions chromium in compounds exists in the trivalent, Cr(III), or the hexavalent,
Cr(VI) state. Chromium is an essential trace element for mammals, including man, whereas it is presumed
that Cr(VI) compounds are genotoxic and carcinogenic in humans. Interconversion of trivalent and
hexavalent chromium species can occur during sample preparation and analysis, but these processes are
minimised, to the extent possible, by the sample preparation methods prescribed by this document.

v
International Standard ISO 15192:2025(en)
Soil and waste — Determination of chromium(VI) in solid
material by alkaline digestion and ion chromatography with
spectrophotometric detection
1 Scope
This document specifies the determination of Cr(VI) in solid waste material and soil by alkaline digestion
and ion chromatography with spectrophotometric detection. This method is applicable to determine Cr(VI)
mass fractions in solids more than 0,1 mg/kg.
NOTE In case of reducing or oxidising waste matrix no valid Cr(VI) content can be reported.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 8466-1, Water quality — Calibration and evaluation of analytical methods — Part 1: Linear calibration
function
ISO 11464, Soil quality — Pretreatment of samples for physico-chemical analysis
ISO 11465, Sludge and solid environmental matrices — Determination of dry residue or water content and
calculation of the dry matter fraction on a mass basis
EN 15002, Characterization of waste — Preparation of test portions from the laboratory sample
EN 15934, Sludge, treated biowaste, soil and waste — Calculation of dry matter fraction after determination of
dry residue or water content
EN 16179, Sludge, treated bio waste and soil — Guidance for sample pretreatment
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
4 Safety remarks
Anyone dealing with waste and soil analysis shall be aware of the typical
...


Norme
internationale
ISO 15192
Troisième édition
Déchets et sols — Dosage du
2025-09
chrome(VI) dans les matériaux
solides par digestion alcaline et
chromatographie ionique avec
détection spectrophotométrique
Soil and waste — Determination of chromium(VI) in solid
material by alkaline digestion and ion chromatography with
spectrophotometric detection
Numéro de référence
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2025
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Consignes de sécurité . 1
5 Principe. 2
5.1 Digestion .2
5.2 Dosage .2
5.3 Interférences et sources d’erreur .3
6 Appareillage . 3
7 Réactifs . 4
8 Prétraitement des échantillons . 6
9 Mode opératoire de digestion alcaline . 6
9.1 Généralités .6
9.2 Préparation de solutions d’essai à l’aide d’une plaque chauffante ou d’un bloc chauffant.6
10 Mode opératoire analytique . 7
10.1 Informations générales .7
10.2 Paramétrage des instruments .7
10.3 Étalonnage .7
10.4 Mesurage des solutions d’essai .8
10.5 Contrôle de la qualité .8
10.5.1 Généralités .8
10.5.2 Solution d’essai à blanc .8
10.5.3 Vérification de la méthode .8
10.5.4 Échantillons en double .9
10.5.5 Échantillons dopés au Cr(VI) soluble .9
10.5.6 Échantillons dopés au Cr(III) .9
10.5.7 Interprétation des données de contrôle de la qualité .9
11 Calcul .10
12 Expression des résultats . 10
13 Rapport d’essai . 10
Annexe A (informative) Système de chromatographie ionique .12
Annexe B (informative) Exigences pour la préparation de la prise d’essai . 14
Annexe C (informative) Validation .15
Annexe D (informative) Informations théoriques relatives aux méthodes de dosage du Cr(VI)
dans les échantillons solides.20
Bibliographie .25

iii
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes nationaux
de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude a le droit de faire
partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l’ISO participent également aux travaux. L’ISO collabore étroitement avec
la Commission électrotechnique internationale (IEC) en ce qui concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a
été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir
www.iso.org/directives).
L’ISO attire l’attention sur le fait que la mise en application du présent document peut entraîner l’utilisation
d’un ou de plusieurs brevets. L’ISO ne prend pas position quant à la preuve, à la validité et à l’applicabilité de
tout droit de propriété revendiqué à cet égard. À la date de publication du présent document, l’ISO n'avait pas
reçu notification qu’un ou plusieurs brevets pouvaient être nécessaires à sa mise en application. Toutefois,
il y a lieu d’avertir les responsables de la mise en application du présent document que des informations
plus récentes sont susceptibles de figurer dans la base de données de brevets, disponible à l'adresse
www.iso.org/brevets. L’ISO ne saurait être tenue pour responsable de ne pas avoir identifié tout ou partie de
tels droits de propriété.
Les appellations commerciales éventuellement mentionnées dans le présent document sont données pour
information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion de
l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles techniques au
commerce (OTC), voir: www.iso.org/iso/fr/avant-propos.html.
Le présent document a été élaboré par le comité technique ISO/TC 190, Qualité du sol, sous-comité SC 3,
Méthodes chimiques et caractéristiques physiques, en collaboration avec le comité technique CEN/TC 444,
Méthodes d'essai pour la caractérisation environnementale des matrices solides du Comité européen de
normalisation (CEN), conformément à l’Accord de coopération technique entre l’ISO et le CEN (Accord de
Vienne).
Cette troisième édition annule et remplace le deuxième édition (ISO 15192:2021), qui a fait l'objet d'une
révision technique.
Les principales modifications sont les suivantes:
— intégration du dosage du chrome total dans la solution de digestion alcaline;
— ajout de chromate de baryum comme alternative au chromate de plomb pour la vérification de la méthode
décrite en 10.5.3;
— révision éditoriale du texte, notamment mise à jour des références.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes se
trouve à l’adresse www.iso.org/fr/members.html.

iv
Introduction
Dans les conditions environnementales, le chrome présent dans des composés existe à l'état trivalent, Cr(III),
ou hexavalent, Cr(VI). Le chrome est un élément trace indispensable aux mammifères, y compris à l'Homme,
tandis que les composés du Cr(VI) sont présumés génotoxiques et cancérogènes pour l'être humain. La
conversion des espèces de chrome trivalent et hexavalent peut se produire pendant la préparation des
échantillons et l’analyse des échantillons, mais ces processus sont réduits au minimum, dans la mesure du
possible, par les méthodes de préparation des échantillons spécifiées dans le présent document.

v
Norme internationale ISO 15192:2025(fr)
Déchets et sols — Dosage du chrome(VI) dans les matériaux
solides par digestion alcaline et chromatographie ionique
avec détection spectrophotométrique
1 Domaine d’application
Le présent document spécifie le dosage du Cr(VI) dans les déchets solides et les sols par digestion alcaline
et chromatographie ionique avec détection spectrophotométrique. Cette méthode est applicable pour
déterminer les fractions massiques de Cr(VI) dans les solides supérieures à 0,1 mg/kg.
NOTE Il n’est pas possible de consigner une teneur en Cr(VI) valable dans un rapport lorsque la matrice de déchets
est réductrice ou oxydante.
2 Références normatives
Les documents suivants sont cités dans le texte de sorte qu’ils constituent, pour tout ou partie de leur
contenu, des exigences du présent document. Pour les références datées, seule l’édition citée s’applique. Pour
les références non datées, la dernière édition du document de référence s'applique (y compris les éventuels
amendements).
ISO 8466-1, Qualité de l'eau — Étalonnage et évaluation des méthodes d'analyse — Partie 1: Fonction linéaire
d'étalonnage
ISO 11464, Qualité du sol — Prétraitement des échantillons pour analyses physico-chimiques
ISO 11465, Boues et matrices environnementales solides — Détermination de la teneur en résidu sec ou en eau et
calcul
...


FINAL DRAFT
International
Standard
ISO/FDIS 15192
ISO/TC 190/SC 3
Soil and waste — Determination
Secretariat: DIN
of chromium(VI) in solid
Voting begins on:
material by alkaline digestion
2025-06-17
and ion chromatography with
Voting terminates on:
spectrophotometric detection
2025-08-12
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 15192:2025(en) © ISO 2025

FINAL DRAFT
ISO/FDIS 15192:2025(en)
International
Standard
ISO/FDIS 15192
ISO/TC 190/SC 3
Soil and waste — Determination
Secretariat: DIN
of chromium(VI) in solid
Voting begins on:
material by alkaline digestion
and ion chromatography with
Voting terminates on:
spectrophotometric detection
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2025
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 15192:2025(en) © ISO 2025

ii
ISO/FDIS 15192:2025(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Safety remarks . 1
5 Principle . 2
5.1 Digestion .2
5.2 Determination .2
5.3 Interferences and sources of error .2
6 Apparatus . 3
7 Reagents . 3
8 Sample pretreatment . 6
9 Alkaline digestion procedure . 6
9.1 General .6
9.2 Preparation of test solutions using a hotplate or heating block .6
10 Analytical procedure . 7
10.1 General information.7
10.2 Instrumental set-up .7
10.3 Calibration .7
10.4 Test solution measurement .7
10.5 Quality control .8
10.5.1 General .8
10.5.2 Blank test solution .8
10.5.3 Verification of method .8
10.5.4 Duplicate samples.8
10.5.5 Soluble Cr(VI) spiked samples .8
10.5.6 Cr(III) spiked samples .9
10.5.7 Interpretation of quality control data .9
11 Calculation . 9
12 Expression of results .10
13 Test report . 10
Annex A (informative) Ion chromatographic system .11
Annex B (informative) Requirements for test portion preparation .13
Annex C (informative) Validation . 14
Annex D (informative) Background on methods for the determination of Cr(VI) in solid samples . 19
Bibliography .23

iii
ISO/FDIS 15192:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO’s adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 190, Soil quality, Subcommittee SC 3, Chemical
and physical characterization, in collaboration with the European Committee for Standardization (CEN)
Technical Committee CEN/TC 444, Environmental characterization of solid matrices, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 15192:2021), which has been technically
revised.
The main changes are as follows:
— integration of the determination of the total chromium in the alkaline digestion solution;
— addition of barium chromate as an alternative to lead chromate for the verification of the method in 10.5.3;
— the text has been editorially revised, including updating of references.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
ISO/FDIS 15192:2025(en)
Introduction
Under environmental conditions chromium in compounds exists in the trivalent, Cr(III), or the hexavalent,
Cr(VI) state. Chromium is an essential trace element for mammals, including man, whereas it is presumed
that Cr(VI) compounds are genotoxic and potentially carcinogenic in humans. Interconversion of trivalent
and hexavalent chromium species can occur during sample preparation and analysis, but these processes
are minimised, to the extent possible, by the sample preparation methods prescribed by this document.

v
FINAL DRAFT International Standard ISO/FDIS 15192:2025(en)
Soil and waste — Determination of chromium(VI) in solid
material by alkaline digestion and ion chromatography with
spectrophotometric detection
1 Scope
This document specifies the determination of Cr(VI) in solid waste material and soil by alkaline digestion
and ion chromatography with spectrophotometric detection. This method is applicable to determine Cr(VI)
mass fractions in solids more than 0,1 mg/kg.
NOTE In case of reducing or oxidising waste matrix no valid Cr(VI) content can be reported.
2 Normative references
The following documents are referred to in the
...


ISO/TC 190/SC 3
Date: 2025-04-07
ISO/FDIS 15192:2025(E)
ISO/TC 190/SC 3
Secretariat: DIN
Date: 2025-06-02
Soil and waste — Determination of chromium(VI) in solid
material by alkaline digestion and ion chromatography with
spectrophotometric detection
Déchets et sols — Dosage du chrome(VI) dans les matériaux solides par digestion alcaline et
chromatographie ionique avec détection spectrométrique

FDIS stage
ISO/FDIS 15192:2025(Een)
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel.Phone: + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland
iii
ISO/FDIS 15192:2025(Een)
Contents
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Safety remarks . 2
5 Principle . 2
5.1 Digestion . 2
5.2 Determination . 2
5.3 Interferences and sources of error . 3
6 Apparatus . 3
7 Reagents . 4
8 Sample pretreatment . 6
9 Alkaline digestion procedure . 7
9.1 General . 7
9.2 Preparation of test solutions using a hotplate or heating block . 7
10 Analytical procedure . 7
10.1 General information . 7
10.2 Instrumental set-up . 7
10.3 Calibration . 8
10.4 Test solution measurement . 8
10.5 Quality control . 8
11 Calculation . 10
12 Expression of results . 11
13 Test report . 11
Annex A (informative) Ion chromatographic system. 12
Annex B (informative) Requirements for test portion preparation . 15
Annex C (informative) Validation . 16
Annex D (informative) Background on methods for the determination of Cr(VI) in solid samples21
Bibliography . 26

iv © ISO 2025 – All rights reserved
iv
ISO/FDIS 15192:2025(Een)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights
in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s)
which may be required to implement this document. However, implementers are cautioned that this may not
represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO'sISO’s adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 190, Soil quality, Subcommittee SC 3, Chemical
and physical characterization, in collaboration with the European Committee for Standardization (CEN)
Technical Committee CEN/TC 444, Environmental Characterizationcharacterization of solid matrices, in
accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 15192:2021), which has been technically
revised.
The main changes are as follows:
— — integration of the determination of the total chromium in the alkaline digestion solution;
— — addition of barium chromate as an alternative to lead chromate for the verification of the method in
10.5.310.5.3;;
— — the text has been editorially revised, including updating of references.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
v
ISO/FDIS 15192:2025(Een)
Introduction
Under environmental conditions chromium in compounds exists in the trivalent, Cr(III), or the hexavalent,
Cr(VI) state. Chromium is an essential trace element for mammals, including man, whereas it is presumed that
Cr(VI) compounds are genotoxic and potentially carcinogenic in humans. Interconversion of trivalent and
hexavalent chromium species can occur during sample preparation and analysis, but these processes are
minimised, to the extent possible, by the sample preparation methods prescribed by this document.
vi © ISO 2025 – All rights reserved
vi
DRAFT INTERNATIONAL STANDARD ISO/FDIS 15192:2025(E)

Characterization of soilSoil and waste — Determination of
chromium(VI) in solid material by alkaline digestion and ion
chromatography with spectrometricspectrophotometric detection
1 Scope
This document specifies the determination of Cr(VI) in solid waste material and soil by alkaline digestion and
ion chromatography with spectrometricspectrophotometric detection. This method is applicable to determine
Cr(VI)-) mass fractions in solids more than 0,1 mg/kg.
NOTE In case of reducing or oxidising waste matrix no valid Cr(VI) content can be reported.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 8466--1, Water quality — Calibration and evaluation of analytical methods — Part 1: Linear calibration
function
ISO 11464, Soil quality — Pretreatment of samples for physico-chemical analysis
ISO 11465, Soil quality Sludge and solid environmental matrices — Determination of dry matter andresidue or
1)
water content and calculation of the dry matter fraction on a mass basis — Gravimetric methodEN
EN 15002, Characterization of waste — Preparation of test portions from the laboratory sample
EN 15934, Sludge, treated biowaste, soil and waste — Calculation of dry matter fraction after determination of
dry residue or water content
EN 16179, Sludge, treated bio waste and soil — Guidance for sample pretreatment
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— — ISO Online browsing platform: available at https://www.iso.org/obp
— — IEC Electropedia: available at https://www.electropedia.org/

1)
Under preparation. Stage at the time of publication: ISO/FDIS 11465:2025.

ISO/FDIS 15192:2025(Een)
4 Safety remarks
Anyone dealing with waste and soil analysis shall be aware of the typical risks of the material irrespective of
the parameters determined. Waste and soil samples maycan contain hazardous (e.g. toxic, reactive, flammable,
infectious) substances, which can be liable to biological and/or chemical reaction. Consequently, these
samples should be handled with special care. The gases which can be produced by microbiological or chemical
activity are potentially flammable and can pressurise sealed bottles. Bursting bottles are likely to result in
hazardous shrapnel, dust and/or aerosol. It is presupposed that national regulations are followed with respect
to all hazards associated with this method.
Avoid any contact with the skin, ingestion or inhalation of Cr(VI) compounds. Cr(VI) compounds are genotoxic
and potentially carcinogenic to humans.
5 Principle
5.1 Digestion
This document describes an alkaline digestion procedure for extracting Cr(VI) from soluble, adsorbed and
precipitated forms of chromium compounds in solid waste materials and soil. To quantify the content of Cr(VI)
in a solid matrix, three criteria shall be satisfied:
a) a) digestion solution shall solubilize all species of Cr(VI);
b) b) conditions of the digestion shall not induce reduction of native Cr(VI) to Cr(III);
c) c) method shall not cause oxidation of native Cr(III) contained in the sample to Cr(VI).
The alkaline digestion described in this document meets these criteria for a wide spectrum of soils and wastes.
Under the alkaline conditions of the digestion, negligible reduction of Cr(VI) or oxidation of native Cr(III) is
2+
expected. The addition of Mg in a phosphate buffer to the alkaline solution minimises air oxidation of
[52][28][32[[ ]
trivalent chromium. .
NOTE Background on methods for the determination of Cr(VI) in solid samples is given in Annex DAnnex D.
5.2 Determination
Quantification of Cr(VI) in the alkaline digestion solution should be performed using a suitable technique with
appropriate accuracy. For this purpose, e.g.,. ion chromatography is used to separate Cr(VI) from
interferences. Following this ion chromatographic separation, Cr(VI) is measured spectrophotometrically
either at 365 nm (direct UV detection) or after post-column derivatisation with 1,5-diphen
...


PROJET FINAL
Norme
internationale
ISO/FDIS 15192
ISO/TC 190/SC 3
Déchets et sols — Dosage du
Secrétariat: DIN
chrome(VI) dans les matériaux
Début de vote:
solides par digestion alcaline et
2025-06-17
chromatographie ionique avec
Vote clos le:
détection spectrophotométrique
2025-08-12
Soil and waste — Determination of chromium(VI) in solid
material by alkaline digestion and ion chromatography with
spectrophotometric detection
LES DESTINATAIRES DU PRÉSENT PROJET SONT
INVITÉS À PRÉSENTER, AVEC LEURS OBSERVATIONS,
NOTIFICATION DES DROITS DE PROPRIÉTÉ DONT ILS
AURAIENT ÉVENTUELLEMENT CONNAISSANCE ET À
FOURNIR UNE DOCUMENTATION EXPLICATIVE.
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES FINS
INDUSTRIELLES, TECHNOLOGIQUES ET COM-MERCIALES,
AINSI QUE DU POINT DE VUE DES UTILISATEURS, LES
PROJETS DE NORMES
TRAITEMENT PARALLÈLE ISO/CEN
INTERNATIONALES DOIVENT PARFOIS ÊTRE CONSIDÉRÉS
DU POINT DE VUE DE LEUR POSSI BILITÉ DE DEVENIR DES
NORMES POUVANT
SERVIR DE RÉFÉRENCE DANS LA RÉGLEMENTATION
NATIONALE.
Numéro de référence
ISO/FDIS 15192:2025(fr) © ISO 2025

PROJET FINAL
ISO/FDIS 15192:2025(fr)
Norme
internationale
ISO/FDIS 15192
ISO/TC 190/SC 3
Déchets et sols — Dosage du
Secrétariat: DIN
chrome(VI) dans les matériaux
Début de vote:
solides par digestion alcaline et
2025-06-17
chromatographie ionique avec
Vote clos le:
détection spectrophotométrique
2025-08-12
Soil and waste — Determination of chromium(VI) in solid
material by alkaline digestion and ion chromatography with
spectrophotometric detection
LES DESTINATAIRES DU PRÉSENT PROJET SONT
INVITÉS À PRÉSENTER, AVEC LEURS OBSERVATIONS,
NOTIFICATION DES DROITS DE PROPRIÉTÉ DONT ILS
AURAIENT ÉVENTUELLEMENT CONNAISSANCE ET À
FOURNIR UNE DOCUMENTATION EXPLICATIVE.
DOCUMENT PROTÉGÉ PAR COPYRIGHT
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES FINS
© ISO 2025 INDUSTRIELLES, TECHNOLOGIQUES ET COM-MERCIALES,
AINSI QUE DU POINT DE VUE DES UTILISATEURS, LES
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
PROJETS DE NORMES
TRAITEMENT PARALLÈLE ISO/CEN
INTERNATIONALES DOIVENT PARFOIS ÊTRE CONSIDÉRÉS
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
DU POINT DE VUE DE LEUR POSSI BILITÉ DE DEVENIR DES
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
NORMES POUVANT
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
SERVIR DE RÉFÉRENCE DANS LA RÉGLEMENTATION
NATIONALE.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse Numéro de référence
ISO/FDIS 15192:2025(fr) © ISO 2025

ii
ISO/FDIS 15192:2025(fr)
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Consignes de sécurité . 1
5 Principe. 2
5.1 Digestion .2
5.2 Dosage .2
5.3 Interférences et sources d’erreur .3
6 Appareillage . 3
7 Réactifs . 4
8 Prétraitement des échantillons . 6
9 Mode opératoire de digestion alcaline . 6
9.1 Généralités .6
9.2 Préparation de solutions d’essai à l’aide d’une plaque chauffante ou d’un bloc chauffant.6
10 Mode opératoire analytique . 7
10.1 Informations générales .7
10.2 Paramétrage des instruments .7
10.3 Étalonnage .7
10.4 Mesurage des solutions d’essai .8
10.5 Contrôle de la qualité .8
10.5.1 Généralités .8
10.5.2 Solution d’essai à blanc .8
10.5.3 Vérification de la méthode .8
10.5.4 Échantillons en double .9
10.5.5 Échantillons dopés au Cr(VI) soluble .9
10.5.6 Échantillons dopés au Cr(III) .9
10.5.7 Interprétation des données de contrôle de la qualité .9
11 Calcul .10
12 Expression des résultats . 10
13 Rapport d’essai . 10
Annexe A (informative) Système de chromatographie ionique .12
Annexe B (informative) Exigences pour la préparation de la prise d’essai . 14
Annexe C (informative) Validation .15
Annexe D (informative) Informations théoriques relatives aux méthodes de dosage du Cr(VI)
dans les échantillons solides.20
Bibliographie .25

iii
ISO/FDIS 15192:2025(fr)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes nationaux
de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude a le droit de faire
partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l’ISO participent également aux travaux. L’ISO collabore étroitement avec
la Commission électrotechnique internationale (IEC) en ce qui concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a
été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir
www.iso.org/directives).
L’ISO attire l’attention sur le fait que la mise en application du présent document peut entraîner l’utilisation
d’un ou de plusieurs brevets. L’ISO ne prend pas position quant à la preuve, à la validité et à l’applicabilité de
tout droit de propriété revendiqué à cet égard. À la date de publication du présent document, l’ISO n'avait pas
reçu notification qu’un ou plusieurs brevets pouvaient être nécessaires à sa mise en application. Toutefois,
il y a lieu d’avertir les responsables de la mise en application du présent document que des informations
plus récentes sont susceptibles de figurer dans la base de données de brevets, disponible à l'adresse
www.iso.org/brevets. L’ISO ne saurait être tenue pour responsable de ne pas avoir identifié tout ou partie de
tels droits de propriété.
Les appellations commerciales éventuellement mentionnées dans le présent document sont données pour
information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion de
l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles techniques au
commerce (OTC), voir: www.iso.org/iso/fr/avant-propos.html.
Le présent document a été élaboré par le comité technique ISO/TC 190, Qualité du sol, sous-comité SC 3,
Caractérisation chimique et physique, en collaboration avec le comité technique CEN/TC 444, Caractérisation
environnementale des matrices solides du Comité européen de normalisation (CEN), conformément à l’Accord
de coopération technique entre l’ISO et le CEN (Accord de Vienne).
Cette troisième édition annule et remplace le deuxième édition (ISO 15192:2021), qui a fait l'objet d'une
révision technique.
Les principales modifications sont les suivantes:
— intégration du dosage du chrome total dans la solution de digestion alcaline;
— ajout de chromate de baryum comme alternative au chromate de plomb pour la vérification de la méthode
décrite en 10.5.3;
— révision éditoriale du texte, notamment mise à jour des références.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes se
trouve à l’adresse www.iso.org/fr/members.html.

iv
ISO/FDIS 15192:2025(fr)
Introduction
Dans les conditions environnementales, le chrome présent dans des composés existe à l'état trivalent, Cr(III),
ou hexavalent, Cr(VI). Le chrome est un élément trace indispensable aux mammifères, y compris à l'Homme,
tandis que les composés du Cr(VI) sont présumés génotoxiq
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.