EN 1630:2011+A1:2015

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Türen, Fenster, Vorhangfassaden, Gitterelemente und Abschlüsse - Einbruchhemmung - Prüfverfahren für die Ermittlung der Widerstandsfähigkeit gegen manuelle EinbruchversucheBlocs-portes pour piétons, fenêtres, façades rideaux, grilles et fermetures - Résistance à l'effraction - Méthode d'essai pour la détermination de la résistance aux tentatives manuelles d'effractionPedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts91.060.50Vrata in oknaDoors and windows13.310Varstvo pred kriminalomProtection against crimeICS:Ta slovenski standard je istoveten z:EN 1630:2011+A1:2015SIST EN 1630:2012+A1:2016en,fr,de01-marec-2016SIST EN 1630:2012+A1:2016SLOVENSKI
STANDARDSIST EN 1630:20121DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1630:2011+A1
December
t r s w ICS
s uä u s râ
{ sä r x rä w r Supersedes EN
s x u rã t r s sEnglish Version
Pedestrian doorsetsá windowsá curtain wallingá grilles and shutters æ Burglar resistance æ Test method for the determination of resistance to manual burglary attemptsBlocsæportes pour piétonsá fenêtresá façades rideauxá grilles et fermetures æ Résistance à l 5effraction æ Méthode d 5essai pour la détermination de la résistance aux tentatives manuelles d 5effraction
Türená Fensterá Vorhangfassadená Gitterelemente und Abschlüsse æ Einbruchhemmung æ Prüfverfahren für die Ermittlung der Widerstandsfähigkeit gegen manuelle Einbruchversuche This European Standard was approved by CEN on
t December
t r s r and includes Amendment
approved by CEN on
s y November
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x u rã t r s s ªA sã t r s w ESIST EN 1630:2012+A1:2016

European foreword .4 1 Scope .6 2 Normative references .6 3 Terms and definitions .7 4 Apparatus and test team .8 4.1 Test rig .8 4.2 Test team .8 4.2.1 Personnel .8 4.2.2 Composition of the test team .8 4.2.3 Essential capabilities of the test team members .8 4.2.4 Training .9 4.3 Measurement and recording devices .9 4.3.1 Measuring equipment.9 4.3.2 Video recording .9 4.4 Tolerances . 10 4.5 Sub-frame . 10 5 Test specimen . 10 5.1 General . 10 5.2 Preparation and examination of the specimen . 11 6 Procedure . 12 6.1 General . 12 6.2 Test room climate . 12 6.3 Areas of attack . 12 6.3.1 General . 12 6.3.2 Construction products with moving elements . 12 6.3.3 Fixed construction products . 12 6.4 Attack side and attack height . 13 6.5 Pre-test . 13 6.6 Main test . 13 6.7 Failure criteria . 13 7 !Tool sets . 14 7.1 General . 14 7.2 Tool set A1 resistance class 1 (see Figure A.1) – Application of the tool set A1 in resistance class 1 . 14 7.3 Tool set A2 resistance class 2 (see Figure A.2) – Application of the tool set A2 in resistance class 2 . 15 7.4 Tool set A3 resistance class 3 (see Figure A.3) – Application of the tool set A3 in resistance class 3 . 15 7.5 Tool set A4 resistance class 4 (see Figure A.4) – Application of the tool set A4 in resistance class 4 . 16 7.6 Tool set A5 resistance class 5 (see Figure A.5) – Application of the tool set A5 in resistance class 5 . 16 SIST EN 1630:2012+A1:2016

Tool sets . 19 A.1 Tool set A1 . 19 A.2 Tool set A2 . 20 A.3 Tool set A3 . 21 A.4 Tool set A4 . 22 A.5 Tool set A5 . 23 A.6 Tool set A6 . 24 Annex B (normative)
Test sequence for manual test of resistance classes 2 to 6 . 25 B.1 Test sequence for manual test of resistance classes 2 to 6 . 25 Annex C (normative)
Example of test equipment Dimensions in mm . 26 Annex D (informative)
Examples of mounting arrangements . 27 D.1 Examples of mounting arrangements for doorsets . 27 D.2 Examples of mounting arrangements for windows . 29 D.3 Examples of mounting arrangements for wing and folding shutters . 30 D.4 Examples of mounting arrangements for guide rails and roller shutters into the test rig . 33 D.5 Examples of mounting arrangements for grilles into the test rig . 36 Bibliography . 37
It is acknowledged that there are two aspects to the burglar resistance performance of construction products, their normal resistance to forced operation and their ability to remain fixed to the building. Due to the limitation of reproducing the fixing methods and building construction in a laboratory environment this aspect is not fully covered by the standard. This is particularly true with products built into a building. The performance of the fixed part of the product is evaluated using a standard sub frame. It is the manufacturer´s responsibility to ensure that guidance on the fixing of the product is contained in the mounting instructions and that this guidance is suitable for the burglar resistance class claimed for the product. As with the other referenced standards this specification uses a standard sub frame and the product is mounted according to the manufacturers' instructions. An example for the contents of the manufacturer´s installation instructions is given in Annex A of EN 1627:2011. This test method does not evaluate the performance of the fixing to the building. This European Standard does not apply to doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by EN 13241-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 356:1999, Glass in building - Security glazing - Testing and classification of resistance against manual attack EN 1303:2005, Building hardware - Cylinders for locks - Requirements and test methods EN 1627:2011, Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification !EN 1628:2011+A1:2015", Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading !EN 1629:2011+A1:2015", Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading EN 1906:2010, Building hardware - Lever handles and knob furniture - Requirements and test methods SIST EN 1630:2012+A1:2016

At least two members of the test team shall be capable of performing the manual test. At least one member of the test team shall be competent to record the data and observations in such a way that a test report can be established. For each test in an area of attack only one test team member shall be permitted. 4.2.3 Essential capabilities of the test team members In order to perform the manual test, test team members shall be able to demonstrate that they are:
— mentally alert and well-motivated to maintain a sustained burglary attack; — physically able to perform the test, and are able to withstand the physical strain likely to be imposed for the duration of the test;
— free from mobility impairments and have normal vision, corrected where necessary; SIST EN 1630:2012+A1:2016

In addition, the test team shall be able to demonstrate detailed knowledge and understanding of: — the design and manufacture of burglar resistant construction products including the locks, hardware and materials used; — current modus operandi during burglary attacks; — operation and control of test equipment; — operation, control and maintenance of the attack tool sets; — operation, control and maintenance of the measuring equipment; — the handling of the tools used when performing the test for burglar resistance. 4.2.4 Training The test team shall have the opportunity for continuous development of skills and expertise appropriate to the performance of the tests, including: — checking and assessing of video recording of the tests by the test team;
NOTE Video records may also form the basis for demonstrating the competence of test team members. — the exchange of knowledge and experience between testing bodies and police agencies;
— further training e.g. measuring techniques, material information, new construction products, new opening and closing techniques. 4.3 Measurement and recording devices 4.3.1 Measuring equipment The following equipment shall be provided: a)
chronometer for measuring the resistance time; b)
chronometer for measuring the total test time; c)
equipment for determining temperature and relative humidity. 4.3.2 Video recording The pre-test and the main test conducted on each test specimen shall be fully recorded with a video recorder. !The videotape and any copies of it shall not be published nor shown publicly without permission from the applicant." NOTE 1 The video may be used as a reference when subsequent changes are made to the product.
NOTE 2 A time reference or code should be shown in the video. SIST EN 1630:2012+A1:2016
...