SIST EN 60684-3-285:2015

SLOVENSKI STANDARD
01-maj-2015
*LENHL]RODFLMVNHFHYLGHO6SHFLILNDFLMH]DSRVDPH]QHYUVWHFHYLOLVW
7RSORWQRVNUþOMLYHSROLROHILQVNHFHYL]DL]RODFLMRVUHGQMHQDSHWRVWQLKVSRMHY,(&

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet
285: Heat-shrinkable polyolefin sleeving, for medium voltage joint insulation (IEC 60684-
3-285:2014)
,VROLHUVFKOlXFKH7HLO$QIRUGHUXQJHQIUHLQ]HOQH6FKODXFKW\SHQ%ODWW
:lUPHVFKUXPSIHQGH3RO\ROHILQVFKOlXFKHIUGHQ(LQVDW]LQ0LWWHOVSDQQXQJVPXIIHQ
,(&
Gaines isolantes souples - Partie 3: spécifications pour types particuliers de gaines -
Feuille 285: gaines thermorétractables, en polyoléfine pour isolation de joint en moyenne
tension (CEI 60684-3-285:2014)
Ta slovenski standard je istoveten z: EN 60684-3-285:2014
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60684-3-285

NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2014
ICS 29.035.20
English Version
Flexible insulating sleeving - Part 3: Specifications for individual
types of sleeving - Sheet 285: Heat-shrinkable polyolefin
sleeving, for medium voltage joint insulation
(IEC 60684-3-285:2014)
Gaines isolantes souples - Partie 3: spécifications pour Isolierschläuche - Teil 3: Anforderungen für einzelne
types particuliers de gaines - Schlauchtypen - Blatt 285: Wärmeschrumpfende
Feuille 285: gaines thermorétractables, en polyoléfine pour Polyolefinschläuche für den Einsatz in
isolation de joint en moyenne tension Mittelspannungsmuffen
(CEI 60684-3-285:2014) (IEC 60684-3-285:2014)
This European Standard was approved by CENELEC on 2014-11-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60684-3-285:2014 E

Foreword
The text of document 15/694/CDV, future edition 1 of IEC 60684-3-285, prepared by IEC/TC 15 "Solid
electrical insulating materials" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60684-3-285:2014.

The following dates are fixed:
(dop) 2015-08-21
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-11-21
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60684-3-285:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :

IEC 60684-3 (all sheets) NOTE Harmonized as EN 60684-3 (all sheets) (not modified).

- 3 - EN 60684-3-285:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

IEC 60684-1 2003 Flexible insulating sleeving - EN 60684-1 2003
Part 1: Definitions and general
requirements
IEC 60684-2 2011 Flexible insulating sleeving - EN 60684-2 2011
Part 2: Methods of test
IEC 60757 1983 Code for designation of colours HD 457 S1 1985

IEC 60684-3-285 ®
Edition 1.0 2014-10
INTERNATIONAL
STANDARD
Flexible insulating sleeving –

Part 3: Specifications for individual types of sleeving –

Sheet 285: Heat-shrinkable polyolefin sleeving, for medium voltage joint

insulation
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
K
ICS 29.035.20 ISBN 978-2-8322-1889-1

– 2 – IEC 60684-3-285:2014 © IEC 2014
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Designation . 6
4 Conditions of test . 7
5 Requirements . 7
6 Sleeving conformance . 7
Bibliography . 10

Table 1 – Property requirements . 8
Table 2 – Requirements for breakdown voltage. 9

IEC 60684-3-285:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FLEXIBLE INSULATING SLEEVING –

Part 3: Specifications for individual types of sleeving –
Sheet 285: Heat-shrinkable polyolefin sleeving,
for medium voltage joint insulation

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organiz
...