SIST EN 15434:2006/kFprA1:2009
(Amendment)Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
This European Standard covers the evaluation of conformity and the factory production control of sealant for the intrinsic capabilities when intended to apply for:
manufacturing of insulating glass units where ultra-violet resistance and/or mechanical resistance (structural use) of the insulating glass edge seal is required:
required level of resistance to UV exposure will depend on the degree of exposure to UV radiation with or without protection;
when the outer seal of the insulating glass has a structural function and/or is exposed to the UV radiation without any protection, only silicone based sealants are permitted;
when the outer seal of the insulating glass has no structural function and is protected from direct exposure to UV radiation, organic and silicone based sealants are permitted;
manufacturing of factory made structural sealant glazing elements when referred to by the relevant European Standards and ETAGs.
Only silicone based sealants are permitted;
assembling of glass products into or onto supports, where also ultra-violet resistance and/or mechanical resistance (structural use) of the seal is required under controlled environmental conditions as described in Clause 5 of EN 13022–2:2006.
Only silicone based sealants are permitted.
This European Standard also specifies requirements concerning seals and bonds of sealant in conformity with this European Standard.
When bonding of sealant to a non-glass substrate is tested, the substrate, which means the material, its treatment and its preparations for bonding, as applied or to be applied on the work is used in testing (coating of coated glass is considered as a non-glass substrate).
This European Standard contains other aspects of importance of trade.
Glas im Bauwesen - Produktnorm für lastübertragende und/oder UV-beständige Dichtstoffe (für geklebte Verglasungen und/oder Isolierverglasungen mit exponierten Dichtungen)
Verre dans la construction - Norme de produits pour produit de collage et de scellement structurel et/ou résistants aux rayonnements ultraviolets (utilisé pour les vitrages extérieurs collés et/ou pour les vitrages isolants à bords exposés)
Steklo v gradbeništvu - Produktni standard za strukturna in/ali UV-odporna tesnila (za uporabo v strukturnih zasteklitvah in/ali v izolacijskih steklih z nezavarovanim robnim tesnjenjem)
General Information
- Status
- Not Published
- Public Enquiry End Date
- 19-Dec-2009
- Technical Committee
- STV - Steklo, svetloba in razsvetljava v gradbeništvu
- Current Stage
- 98 - Abandoned project (Adopted Project)
- Start Date
- 14-Apr-2011
- Due Date
- 19-Apr-2011
- Completion Date
- 15-Apr-2011
- Directive
- Harmonized Standard305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Not Harmonized89/106/EEC - Construction products
Relations
- Effective Date
- 18-Jan-2023
- Effective Date
- 11-Jul-2009
Overview
SIST EN 15434:2006/kFprA1:2009 is a European product standard specific to the glass in building sector, setting out requirements for structural and/or ultra-violet (UV) resistant sealants. These sealants are critical in applications such as structural sealant glazing and insulating glass units (IGUs) with exposed edge seals. The standard outlines both the evaluation of conformity and the principles of factory production control for these sealants, with an emphasis on their mechanical strength, resistance to UV radiation, and proper use within building envelopes.
This standard is of substantial practical value for manufacturers, specifiers, and quality assurance teams in the glass and building industry, ensuring product reliability and safety in demanding environmental conditions.
Key Topics
Sealant Performance Requirements:
- Assessment of UV resistance and mechanical (structural) properties of sealants.
- Specification of only silicone-based sealants for exposed and/or structural uses, reflecting their superior durability under UV exposure.
- Permitting organic sealants when seals are non-structural and reliably protected from UV, such as through glass layers or opaque coatings.
Application Scenarios:
The standard describes appropriate sealant use in:- Manufacturing of insulating glass units requiring UV and/or structural performance at edge seals.
- Factory production of structural sealant glazing components, referencing relevant European Standards and technical approval guidelines.
- Installation of glass products onto supports where controlled environments as described in EN 13022-2 are applicable.
Conformity Assessment & Factory Production Control:
- Production processes must include thorough evaluation of sealant performance and regular quality controls.
- Ensures consistency in manufacturing and compliance with requirements for sealing and bonding performance.
- Includes test methods and acceptance criteria for mechanical and UV resistance.
Testing on Various Substrates:
- When sealants are bonded to non-glass surfaces (such as coated glass or metal), all specific substrate conditions, treatments, and preparations required are covered during conformity testing.
Applications
This standard directly supports the following practical uses:
Insulating Glass Units (IGUs):
For IGUs with seals exposed to sunlight or performing a structural role, only tested silicone sealants are permissible, ensuring longevity and safety. When UV protection is built into the assembly (e.g., by glass interlayers or opaque covers), the use of organic sealants is allowed, broadening material selection.Structural Sealant Glazing:
Used in curtain walling, facades, and architectural features where glass panels are adhered to building frames, the standard ensures the structural integrity and weather resistance of these assemblies.Specialized Installations:
Suitable for assembling glass products onto supports in controlled factory settings, crucial for prefabricated construction systems and off-site manufacturing environments.
Related Standards
Professionals using SIST EN 15434:2006/kFprA1:2009 should also be aware of related standards that complement or provide referenced guidelines, including:
- EN 1279-4:
For sealants fully protected from UV radiation in IGUs. - EN 13022-2:
Outlines environmental conditions for the assembly of glass elements in controlled environments. - EN ISO 4892-2:
Specifies testing methods for UV resistance using Xenon-arc lamps. - EN ISO 9227:
Defines corrosion testing in artificial atmospheres via salt spray methods. - EN ISO 9001:
Sets out requirements for quality management systems, reinforcing the importance of systematic production control.
By following SIST EN 15434 and its related standards, glass manufacturers and façade contractors ensure optimal performance, durability, and safety in modern glazing applications, supporting compliance across Europe and enhancing the quality and reliability of building envelopes.
Frequently Asked Questions
SIST EN 15434:2006/kFprA1:2009 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)". This standard covers: This European Standard covers the evaluation of conformity and the factory production control of sealant for the intrinsic capabilities when intended to apply for: manufacturing of insulating glass units where ultra-violet resistance and/or mechanical resistance (structural use) of the insulating glass edge seal is required: required level of resistance to UV exposure will depend on the degree of exposure to UV radiation with or without protection; when the outer seal of the insulating glass has a structural function and/or is exposed to the UV radiation without any protection, only silicone based sealants are permitted; when the outer seal of the insulating glass has no structural function and is protected from direct exposure to UV radiation, organic and silicone based sealants are permitted; manufacturing of factory made structural sealant glazing elements when referred to by the relevant European Standards and ETAGs. Only silicone based sealants are permitted; assembling of glass products into or onto supports, where also ultra-violet resistance and/or mechanical resistance (structural use) of the seal is required under controlled environmental conditions as described in Clause 5 of EN 13022–2:2006. Only silicone based sealants are permitted. This European Standard also specifies requirements concerning seals and bonds of sealant in conformity with this European Standard. When bonding of sealant to a non-glass substrate is tested, the substrate, which means the material, its treatment and its preparations for bonding, as applied or to be applied on the work is used in testing (coating of coated glass is considered as a non-glass substrate). This European Standard contains other aspects of importance of trade.
This European Standard covers the evaluation of conformity and the factory production control of sealant for the intrinsic capabilities when intended to apply for: manufacturing of insulating glass units where ultra-violet resistance and/or mechanical resistance (structural use) of the insulating glass edge seal is required: required level of resistance to UV exposure will depend on the degree of exposure to UV radiation with or without protection; when the outer seal of the insulating glass has a structural function and/or is exposed to the UV radiation without any protection, only silicone based sealants are permitted; when the outer seal of the insulating glass has no structural function and is protected from direct exposure to UV radiation, organic and silicone based sealants are permitted; manufacturing of factory made structural sealant glazing elements when referred to by the relevant European Standards and ETAGs. Only silicone based sealants are permitted; assembling of glass products into or onto supports, where also ultra-violet resistance and/or mechanical resistance (structural use) of the seal is required under controlled environmental conditions as described in Clause 5 of EN 13022–2:2006. Only silicone based sealants are permitted. This European Standard also specifies requirements concerning seals and bonds of sealant in conformity with this European Standard. When bonding of sealant to a non-glass substrate is tested, the substrate, which means the material, its treatment and its preparations for bonding, as applied or to be applied on the work is used in testing (coating of coated glass is considered as a non-glass substrate). This European Standard contains other aspects of importance of trade.
SIST EN 15434:2006/kFprA1:2009 is classified under the following ICS (International Classification for Standards) categories: 81.040.20 - Glass in building. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 15434:2006/kFprA1:2009 has the following relationships with other standards: It is inter standard links to SIST EN 15434:2006+A1:2010, SIST EN 15434:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 15434:2006/kFprA1:2009 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 15434:2006/kFprA1:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2009
Steklo v gradbeništvu - Produktni standard za strukturna in/ali UV-odporna tesnila
(za uporabo v strukturnih zasteklitvah in/ali v izolacijskih steklih z nezavarovanim
robnim tesnjenjem)
Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for
use with structural sealant glazing and/or insulating glass units with exposed seals)
Glas im Bauwesen - Produktnorm für lastübertragende und/oder UV-beständige
Dichtstoffe (für geklebte Verglasungen und/oder Isolierverglasungen mit exponierten
Dichtungen)
Verre dans la construction - Norme de produits pour produit de collage et de scellement
structurel et/ou résistants aux rayonnements ultraviolets (utilisé pour les vitrages
extérieurs collés et/ou pour les vitrages isolants à bords exposés)
Ta slovenski standard je istoveten z: EN 15434:2006/FprA1
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 15434:2006
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
September 2009
ICS 81.040.20
English Version
Glass in building - Product standard for structural and/or ultra-
violet resistant sealant (for use with structural sealant glazing
and/or insulating glass units with exposed seals)
Verre dans la construction - Norme de produits pour produit Glas im Bauwesen - Produktnorm für lastübertragende
de collage et de scellement structurel et/ou résistants aux und/oder UV-beständige Dichtstoffe (für geklebte
rayonnements ultraviolets (utilisé pour les vitrages Verglasungen und/oder Isolierverglasungen mit exponierten
extérieurs collés et/ou pour les vitrages isolants à bords Dichtungen)
exposés)
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 129.
This draft amendment A1, if approved, will modify the European Standard EN 15434:2006. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15434:2006/FprA1:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Modification to the Scope .4
2 Modification to Clause 2, Normative references .5
3 Modification to Annex D .5
4 Modification to the Bibliography .6
...