SIST EN 13589:2018
(Main)Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method
Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method
This European Standard specifies a method for determining the tensile properties of an unaged, aged, residual or recovered bituminous binder, in particular those of polymer-modified bitumens by means of a force ductility test.
The work done during the force ductility test is a criterion for assessing the quality of these materials.
WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Streckeigenschaften von modifizierten Bitumen mit dem Kraft-Duktilitäts-Verfahren
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Streckeigenschaften von nicht gealterten, gealterten, verbleibenden oder wiedergewonnenen bitumenhaltigen Bindemitteln, insbesondere solchen von polymermodifiziertem Bitumen (PmB), mit einer Kraft-Duktilitäts-Prüfung fest.
Die bei der Kraft-Duktilitäts-Prüfung geleistete Arbeit ist ein Kriterium zur Bestimmung der Qualität dieser Materialien.
WARNUNG - Die Anwendung dieser Europäischen Norm kann die Anwendung gefährlicher Stoffe, Arbeitsgänge und Geräte mit sich bringen. Diese Europäische Norm beansprucht nicht, alle damit verbundenen Sicherheitsprobleme zu behandeln. Es liegt in der Verantwortung des Anwenders dieser Europäischen Norm, vor ihrer Anwendung geeignete Maßnahmen für die Sicherheit und den Gesundheitsschutz des Personals zu ergreifen, und dafür Sorge zu tragen, dass behördliche und gesetzliche Maßnahmen eingehalten werden.
Bitumes et liants bitumineux - Détermination des caractéristiques de traction des bitumes modifiés par la méthode de force-ductilité
La présente Norme européenne prescrit une méthode permettant de déterminer les caractéristiques de traction d’un liant bitumineux non vieilli, vieilli, récupéré ou résiduel, en particulier celles des bitumes modifiés par des polymères, au moyen d'un essai de force-ductilité.
L’énergie mécanique fournie à une éprouvette pendant l‘essai de force-ductilité est un critère permettant d’évaluer la qualité de ces matériaux.
AVERTISSEMENT - L'utilisation de la présente Norme européenne implique l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente Norme européenne n'est pas censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določanje nateznih lastnosti modificiranih bitumnov z metodo določanja sile pri merjenju duktilnosti
Ta evropski standard določa metodo za določanje nateznih lastnosti bitumenskih veziv, predvsem tistih iz bitumnov, modificiranih s polimeri, z metodo določanja sile pri merjenju duktilnosti.
Delo, opravljeno med preskusom določanja sile pri merjenju duktilnosti je merilo za oceno kakovosti teh materialov.
OPOZORILO – Pri uporabi tega standarda so lahko prisotni nevarni materiali, postopki in oprema. Ta evropski standard ne obravnava vseh varnostnih težav, ki se nanašajo na njegovo uporabo. Za vzpostavitev ustreznih varnostnih in zdravstvenih praks ter za določitev uporabnosti regulativnih omejitev pred uporabo je odgovoren uporabnik tega evropskega standarda.
General Information
- Status
- Published
- Public Enquiry End Date
- 04-Mar-2015
- Publication Date
- 03-Sep-2018
- Technical Committee
- VLA - Water proofing
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 16-Jul-2018
- Due Date
- 20-Sep-2018
- Completion Date
- 04-Sep-2018
Relations
- Effective Date
- 01-Oct-2018
- Effective Date
- 01-Oct-2018
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
SIST EN 13589:2018 is a European standard dedicated to the determination of the tensile properties of bitumen and bituminous binders, with a particular focus on polymer-modified bitumens. The standard specifies the force ductility method, a key procedure for evaluating bituminous binders used in road construction and infrastructure projects. This testing method assesses the quality of bitumen by measuring tensile strength and ductility characteristics after various conditions such as unaged, aged, residual, or recovered states. The force ductility test is crucial in ensuring that bituminous materials meet required performance and durability standards.
Due to the involvement of hazardous materials and operations, adherence to proper safety and health practices is essential when applying this standard.
Key Topics
Tensile Properties Testing
SIST EN 13589:2018 establishes a method to determine the tensile characteristics of bitumen, considering different material states. Tensile force and elongation under controlled conditions reveal the flexibility and adhesive properties of the binder.Force Ductility Method
The standard details the use of a ductilometer to stretch a molded bitumen sample at a constant speed and temperature. By measuring the force required and the resulting elongation until fracture or a set elongation is achieved, it enables the calculation of deformation and cohesion energy.Deformation and Cohesion Energy
The work performed on the test specimen is expressed as deformation energy, while cohesion energy is used as a criterion to assess binder quality. The difference in cohesion energy between specified elongation points provides an objective parameter for quality assessment.Sample Preparation and Test Conditions
The document covers sample acquisition, preparation, conditioning, and testing, ensuring standardized conditions for repeatable and reliable results. It also specifies requirements for equipment accuracy and test environment control.Precision and Reporting
Repeatability and reproducibility criteria are defined, supporting the reliability of test results across laboratories. The standard also outlines the minimum required information to be included in every test report.
Applications
SIST EN 13589:2018 is essential for:
Quality Control in Road Construction
Ensuring that bitumen and polymer-modified binders used in road surfaces possess the required tensile and ductility properties for long-term performance.Product Development and Specification
Manufacturers and researchers utilize this standard to develop new bituminous products and to verify if they meet specification requirements.Performance Assessment of Modified Binders
The force ductility test is crucial for evaluating the effects of polymer modification, aging, or recovery processes on bitumen performance.Comparative Analysis
The standardized methodology enables reliable comparison between different bituminous binder samples, material sources, and formulations.
Related Standards
For comprehensive bitumen testing, the following standards are frequently used in conjunction with SIST EN 13589:2018:
EN 58: Bitumen and bituminous binders – Sampling bituminous binders
Covers procedures for proper sample collection.EN 12594: Bitumen and bituminous binders – Preparation of test samples
Addresses sample conditioning for consistent testing.EN 13398: Bitumen and bituminous binders – Determination of the elastic recovery of modified bitumen
Complements tensile testing with elastic recovery measurements.EN 13587: Bitumen and bituminous binders – Determination of tensile properties by the tensile test method
A related method for assessing tensile characteristics.EN 1431: Bitumen and bituminous binders – Determination of residual binder and oil distillate by distillation
Relevant for evaluating binder properties after emulsion tests.
SIST EN 13589:2018 supports compliance, product quality, and the reliable performance of bituminous materials in construction and maintenance projects, making it a fundamental reference for professionals in asphalt, pavement, and material testing sectors.
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Element Materials Technology
Materials testing and product certification.
Sponsored listings
Frequently Asked Questions
SIST EN 13589:2018 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method". This standard covers: This European Standard specifies a method for determining the tensile properties of an unaged, aged, residual or recovered bituminous binder, in particular those of polymer-modified bitumens by means of a force ductility test. The work done during the force ductility test is a criterion for assessing the quality of these materials. WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
This European Standard specifies a method for determining the tensile properties of an unaged, aged, residual or recovered bituminous binder, in particular those of polymer-modified bitumens by means of a force ductility test. The work done during the force ductility test is a criterion for assessing the quality of these materials. WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
SIST EN 13589:2018 is classified under the following ICS (International Classification for Standards) categories: 75.140 - Waxes, bituminous materials and other petroleum products; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13589:2018 has the following relationships with other standards: It is inter standard links to SIST EN 13589:2008, SIST EN 13703:2004, SIST EN 12594:2025, SIST EN 13398:2018, SIST EN 58:2012, SIST EN 13398:2010, SIST EN 13808:2005, SIST EN 14733:2005+A1:2011, SIST EN 13587:2010, SIST EN 14023:2010, SIST EN 15322:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 13589:2018 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LFLUDQLKBitumen und bitumenhaltige Bindemittel - Bestimmung der Streckeigenschaften von modifizierten Bitumen mit dem Kraft-Duktilitäts-VerfahrenBitumes et liants bitumineux - Détermination des caractéristiques de traction des bitumes modifiés par la méthode de force-ductilitéBitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13589:2018SIST EN 13589:2018en,fr,de01-oktober-2018SIST EN 13589:2018SLOVENSKI
STANDARDSIST EN 13703:2004SIST EN 13589:20081DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13589
June
t r s z ICS
{ sä s r rä w r Supersedes EN
s u w z {ã t r r zá EN
s u y r uã t r r uEnglish Version
Bitumen and bituminous binders æ Determination of the tensile properties of modified bitumen by the force ductility method Bitumes et liants bitumineux æ Détermination des caractéristiques de traction des bitumes modifiés par la méthode de force ductilité
Bitumen und bitumenhaltige Bindemittel æ Bestimmung der Streckeigenschaften von modifizierten Bitumen mit dem KraftæDuktilitätsæVerfahren This European Standard was approved by CEN on
t t July
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u w z {ã t r s z ESIST EN 13589:2018
Cohesion energy specification criteria . 10 Bibliography . 12
...