iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

kSIST FprEN 16510-2-5:2025

(Main)

Residential solid fuel burning appliances - Part 2-5: Slow heat release appliances

Residential solid fuel burning appliances - Part 2-5: Slow heat release appliances

This document is applicable to slow heat release appliances for solid fuel (freestanding manually fuelled intermittent burning slow heat release appliances (SHRA) having heat storage capacity such that they can provide heat and release it for an extended period after the fire has gone out).
The intended use of the appliances is space heating in residential buildings. They can be fitted with a boiler or heat exchanger (integral part of the appliance containing water to be heated up) for the supply of hot water for central heating systems.
These slow heat release appliances may be supplied either as an assembled appliance or as a pre-designed unit consisting of prefabricated components designed to be built on site in accordance with the-specified assembly instructions.
These appliances can burn one or more types of the following solid fuels as specified:
—   wood logs;
—   compressed untreated wood;
—   wood pellets;
—   lignite briquettes;
—   solid mineral fuels;
—   peat briquettes.
This document is not applicable to:
—   mechanically fed appliances
—   appliances with fan assisted combustion air
—   one off installations
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of solid fuel burning slow heat release appliances.

Häusliche Feuerstätten für feste Brennstoffe - Teil 2-5: Speicherfeuerstätten

Dieses Dokument ist anzuwenden für Speicherfeuerstätten für feste Brennstoffe (freistehende
handbetriebene intermittierend brennende Geräte mit langsamer Wärmeabgabe (Speicherfeuerstätten), die
über eine solche Wärmespeicherkapazität verfügen, dass sie über einen längeren Zeitraum nach dem
Erlöschen des Feuers Wärme liefern und abgeben können).
Der Verwendungszweck der Geräte ist Raumheizung in Wohngebäuden. Sie können mit wasserführenden
Bauteilen (als feste Bestandteile des Gerätes mit zu erhitzendem Wasser) zur Warmwasserbereitung der
Zentralheizung ausgestattet sein.
Diese Speicherfeuerstätten können entweder als fertig montiertes Gerät oder als vorgefertigte Einheit
geliefert werden, die aus vorgefertigten Bauteilen besteht, die vor Ort gemäß der angegebenen
Montageanleitung zusammengebaut werden sollen.
Die Geräte können wie angegeben einen oder mehrere der folgenden festen Brennstoffe verfeuern:
 Scheitholz;
 Holzbriketts;
 Holzpellets;
 Braunkohlenbriketts;
 feste mineralische Brennstoffe;
 Torfbriketts.
Dieses Dokument ist nicht anzuwenden für
 mechanisch beschickte Geräte;
 Geräte mit Verbrennungsluftgebläse;
 einmalige Installationen.
Dieses Dokument legt das Verfahren für die Bewertung und Überprüfung der Leistungsbeständigkeit (AVCP)
der Eigenschaften von Raumheizern für feste Brennstoffe fest.

Appareils de chauffage domestiques à combustible solide - Partie 2-5: Appareils à libération lente de chaleur (SHRA)

Le présent document s’applique aux appareils de chauffage à combustible solide à libération lente de chaleur (SHRA à combustion intermittente alimentés manuellement, dont la capacité de stockage thermique leur permet de fournir et libérer de la chaleur pendant une durée prolongée après la fin de la combustion).
L’usage prévu des appareils est le chauffage des locaux dans les bâtiments résidentiels. Ils peuvent être équipés d’un bouilleur ou d’un échangeur de chaleur (faisant partie intégrante de l’appareil et contenant de l’eau à chauffer) pour fournir de l’eau chaude aux systèmes de chauffage central.
Ces SHRA peuvent être fournis sous la forme soit d’un appareil assemblé, soit d’une unité conçue au préalable, constituée d’éléments préfabriqués, destinés à être montés sur le site conformément aux instructions d’assemblage spécifiées.
Ces appareils peuvent utiliser un ou plusieurs des types de combustibles solides suivants, comme spécifié :
—   bûches de bois ;
—   bois compressé non traité ;
—   granulés de bois ;
—   briquettes de lignite ;
—   combustibles minéraux solides ;
—   briquettes de tourbe.
Le présent document ne s’applique pas :
—   aux appareils à alimentation mécanique ;
—   aux appareils dont l’air de combustion est assisté par un ventilateur ;
—   aux installations uniques.
Le présent document spécifie des modes opératoires pour l’évaluation et la vérification de la constance des performances (EVCP) des caractéristiques des SHRA.

Grelne naprave na trdna goriva za stanovanjske stavbe - 2-5. del: Naprave, ki počasi oddajajo toploto

General Information

Status
Not Published
Public Enquiry End Date
30-Jun-2023
ICS
97.100.30 - Solid fuel heaters
Technical Committee
OGS - Heating for buildings
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
15-Jan-2025
Due Date
05-Mar-2025
Completion Date
16-Jan-2025
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Mandate
M/577 - COMMISSION IMPLEMENTING DECISION of of 29.7.2021 on a standardisation request to the European Committee for Standardisation as regards space heating appliances in support of Regulation (EU) No 305/2011 of the European Parliament and of the Council
M/577 AMD 1 - COMMISSION IMPLEMENTING DECISION of 28.1.2025 amending Implementing Decision C(2021) 5359 as regards harmonised standards for space heating appliances and the deadlines for the adoption of those standards
Ref Project
EN 16510-2-5:2025 - Residential solid fuel burning appliances - Part 2-5: Slow heat release appliances

Relations

Revises
SIST EN 15250:2007 - Slow heat release appliances fired by solid fuel - Requirements and test methods
Effective Date
01-Jun-2023

Buy Standard

prEN 16510-2-5:2023prEN 16510-2-5:2023
PreviousNext
Draft
prEN 16510-2-5:2023
English language
60 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN 16510-2-5:2023
01-junij-2023
Grelne naprave na trdna goriva za stanovanjske stavbe - 2-5. del: Naprave, ki
počasi oddajajo toploto
Residential solid fuel burning appliances - Part 2-5: Slow heat release appliances
Häusliche Feuerstätten für feste Brennstoffe - Teil 2-5: Speicherfeuerstätten
Appareils de chauffage domestiques à combustible solide - Partie 2-5: Appareils à
libération lente de chaleur (SHRA)
Ta slovenski standard je istoveten z: prEN 16510-2-5
ICS:
97.100.30 Grelniki na trdo gorivo Solid fuel heaters
oSIST prEN 16510-2-5:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 16510-2-5:2023
oSIST prEN 16510-2-5:2023
DRAFT
EUROPEAN STANDARD
prEN 16510-2-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2023
ICS
English Version
Residential solid fuel burning appliances - Part 2-5: Slow
heat release appliances
Häusliche Feuerstätten für feste Brennstoffe - Teil 2-5:
Speicherfeuerstätten
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 295.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16510-2-5:2023 E
worldwide for CEN national Members.

oSIST prEN 16510-2-5:2023
prEN 16510-2-5:2023 (E)
Contents Page
European foreword . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
3.1 General . 8
3.2 Terms and definitions related to Annex EB . 8
4 Characteristics . 9
4.1 Load bearing capacity . 9
4.2 Protection of combustible materials . 9
4.3 Carbon monoxide emission (CO) . 10
4.4 Nitrogen oxides (NO ) emissions . 11
x
4.5 Emission of organic gaseous compounds (OGC) . 11
4.6 Particulate matter (PM) emissions . 12
4.7 Safety and accessibility in use . 12
4.7.1 General . 12
4.7.2 Flue gas outlet temperature at nominal heat output . 12
4.7.3 Flue gas outlet temperature at part load heat output. 12
4.7.4 Minimum flue draught at nominal heat output . 13
4.7.5 Minimum flue draught at part load heat output . 13
4.7.6 Flue gas mass flow at nominal heat output . 13
4.7.7 Flue gas mass flow at part load heat output . 13
4.7.8 Fire safety of installation to the chimney . 13
4.8 Energy economy and heat retention . 13
4.8.1 Space heat output at nominal heat output . 13
4.8.2 Water heat output, if existing at nominal heat output. 14
4.8.3 Efficiency at nominal heat output . 14
4.8.4 Space heat output at part load heat output . 14
4.8.5 Water heat output, if existing at part load heat output . 15
4.8.6 Efficiency at part load heat output . 15
4.8.7 Seasonal space heating efficiency at appliance’s nominal heat output . 15
4.8.8 Energy efficiency . 15
4.8.9 Electric power consumption at nominal heat output, if existing . 16
4.8.10 Electric power consumption at part load heat output, if existing . 16
4.8.11 Standby mode power consumption, if existing . 16
4.9 Environmental sustainability . 16
5 Descriptive features . 18
5.1 Data for potential use with room ventilation systems: type of appliance (in relation
to its tightness to the room) . 18
5.2 Data for the building's statics: appliance's mass . 18
5.3 Materials and construction elements . 18
5.3.1 General . 18
5.3.2 General stresses . 19
5.3.3 Integral boiler or heat exchanger . 19
5.4 Risk of burning fuel falling out . 19
5.5 Temperature rise in the fuel storage . 19
5.6 Temperature rise of the operating components . 19
5.7 Spillage of flue gases into the room . 19
5.7.1 Possible spillage of CO, if relevant for the fuel type. 19
5.7.2 Open operation . 19
oSIST prEN 16510-2-5:2023
prEN 16510-2-5:2023 (E)
5.8 Cleanability . 19
5.8.1 Heating surfaces . 19
5.8.2 Flueways . 19
5.8.3 Ashpan . 20
5.8.4 Bottomgrate . 20
5.8.5 Damper . 20
5.8.6 Fan-cut-out-device . 20
5.9 Strength and leak tightness of boiler shells . 20
6 Assessment and verification of constancy of performance - AVCP . 20
6.1 General . 20
6.2 Assessment of performance . 20
6.2.1 General . 20
6.2.2 Test samples, testing and compliance criteria . 21
6.3 Verification of constancy of performance . 23
6.3.1 Factory production control (FPC) . 23
Annex A (normative) Test methods . 28
A.4 Test environment . 28
A.5 Test assembly . 28
A.5.501 . General
............................................................................................................................................................................. 28
A.5.5 Water circuit for appliances with integral boilers . 28
A.5.501 . Measurement of appliance surface temperature for slow heat release
appliances. 29
A.5.501.1 . General
............................................................................................................................................................................. 29
A.5.501.2 . Selection of measurement
points . 29
A.5.501.3 . Installing thermocouples to the appliance
surface .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15544:2023(Main)
One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) - Dimensioning
EN 15544:2023

The application of the calculations of this document enables a verification of the emission values carbon monoxide, nitrogen dioxide, organically bound carbon as well as dust and the energy efficiency.
Complying with the calculations of this document results in emission values less or equal for carbon monoxide 1 500 mg/mn3 (1 000 mg/MJ), nitrogen dioxide 225 mg/mn3 (150 mg/MJ), organically bound carbon 120 mg/mn3 (80 mg/MJ) and dust 90 mg/mn3 (60 mg/MJ). If the calculations of this document are used in combination with suitable combustion chambers that prove lower emission values in a type test, these values are also considered to be complied with.
The user shall be aware that there might be national or local regulations, which impose stricter legal emissions and/or efficiency requirements.
This document specifies calculations for the dimensioning of Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) based upon the required nominal heat output of the stove as declared by the producer. The Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) are of individual one-off construction design. The document can be used for log wood fired Kachelgrundöfen/Putzgrundöfen (tiled/plastered stoves) that burn one fuel load per storage period with a maximum load between 10 kg and 40 kg (log wood with water content from 12 % to 20 %, thickness of 5 cm to 10 cm in diameter, length varies usually from 25 cm to 50 cm, and is oriented toward the combustion chamber dimensions) and a storage period (nominal heating time) between 8 h and 24 h.
This document is applicable for Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) equipped with fireclay as interior material, with an apparent density between 1,750 kg/m3 and 2,300 kg/m3, a degree of porosity from 17 % up to 33 % by volume and a heat conductivity from 0,90 W/mK up to 1,35 W/mK (temperature range 20 °C to 400 °C).
This document is applicable for Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) with combustion air supply from the side via a firebox door frame or the standing grate of the heating door into the combustion chamber. The document is applicable for an inflow speed of the combustion air between 2 m/s and 4 m/s.
This document also applies to the combination with combustion chambers that are suitable for one-off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) and for which compliance with the legally required emission values has been verified as part of a type test by an accredited and/or notified body.
The following general conditions apply to such combustion chambers:
-   with an air-fuel ratio of between 1,95 and 3,95 according to the type test;
-   with a maximum load from 5 kg to 40 kg;
-   using other suitable materials as well as fireclay.
With regard to the type test, this document is applicable for combustion chambers which are tested:
-   according to EN 15250 (or prEN 16510-2-5);
-   according to EN 13229 (or prEN 16510-2-2); or
-   according to respective national standards (e.g. ÖNORM B 8303).
This document is applicable for type tested combustion chambers designed for batch fired pellet burning if meeting the requirements according to this document (air-fuel ratio between 1,95 and 3,95, the load of the pellets shall be burned in (78 ± 20) min).
This document is not applicable for:
-   combinations with water heat exchangers for central heating or other heat absorbing elements like open water tanks etc.;
-   combustion chambers with glass plates greater than 1/5 of the combustion chamber surface;
-   mass-produced prefabricated stoves (slow heat release appliances) or partly prefabricated stoves (slow heat release appliances) according to EN 15250 (or prEN 16510-2-5).

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16510-1:2023(Main)
Residential solid fuel burning appliances - Part 1: General requirements and test methods
EN 16510-1:2022

This document is applicable to residential solid fuel burning appliances of which the nominal space heat output is more than 6 % of the combined nominal space heat output and nominal water heat output (total heat output).
This document specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of appliances fired by solid fuel (hereafter referred to as “appliance(s)”) and provides instructions for them. Furthermore, it also gives provisions for the evaluation of conformity, i.e. initial type testing (ITT) and factory production control (FPC) and marking of these appliances.
This document specifies CO, NOx, OGC and particulate matter (PM) emission test methods.
This document is as well applicable to appliances intended to carry the load of a chimney.
Appliances receiving combustion air through ductwork from outside the external envelope, which is not air tight, are not considered roomsealed.
This document is not applicable to appliances with boiler parts in contact with fire or flue gases other than when the boiler parts are manufactured from steel or cast iron.
This document is not applicable to appliances with a boiler intended for water systems having:
-   water temperatures above 110 °C and/or an operating pressure of more than 300 kPa (3 bar);
-   direct contact with sanitary hot water.
This document is not applicable to appliances to be operated with ventilating systems which are intended to operate with pressure below -15 Pa in the room of installation of the appliance in relation to the outside atmosphere.

  • Standard
    164 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16510-2-2:2023(Main)
Residential solid fuel burning appliances - Part 2-2: Inset appliances including open fires
EN 16510-2-2:2022

This document is applicable to inset appliances including open fires for solid fuel (hand fed solid fuel fired inset appliances, with or without functional modification, that operate without fire doors or operate with fire doors either as closed only or as closed or open, and also includes open fires fired by solid fuel).
The intended use of the appliances is space heating in residential buildings. They can be fitted with a boiler (integral part of the appliance containing water to be heated up) for the supply of hot water for central heating systems.
The surround of these appliances is integrated with the building with the exception of free-standing appliances and those inset appliances which are installed into a fireplace recess or enclosure.
These appliances can burn one or more types of the following solid fuels as specified:
-   wood logs;
-   compressed untreated wood;
-   wood pellets;
-   lignite briquettes;
-   solid mineral fuels;
-   peat briquettes.
This document is also applicable to Kachelofen/Putzofen inset appliances, having nominal heat outputs up to 15 kW.
This document is not applicable to appliances with fan assisted combustion air or appliances that are mechanically fed.
Open fireplace components such as a bottomgrate with associated fire front which are intended for installation into an existing heat resistant, insulated firebox are not covered by this document.
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of solid fuel burning inset appliances including open fires.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16510-2-4:2023(Main)
Residential solid fuel burning appliances - Part 2-4: Independent boilers - Nominal heat output up to 50 kW
EN 16510-2-4:2022

This document is applicable to independent boiler appliances for solid fuel with a nominal output up to 50 kW (hand and automatically fired independent boilers (hereafter called appliances)).
The indented use of the appliances is space heating in residential buildings. This happens directly or via provision of hot water for central heating. They are designed for use only with open vented systems at a working pressure not exceeding 2 bar.
The appliances can burn one or more types of the following solid fuels as specified:
-   wood logs;
-   compressed untreated wood;
-   wood pellets;
-   lignite briquettes;
-   solid mineral fuels;
-   peat briquettes.
The appliances are operated closed and/or open.
The appliances are typed according to their tightness depending on their designation in accordance with a possible operation together with a room ventilation system.
This document is not applicable for:
-   appliances for hot water only production and heat output < 5 kW;
-   automatic stoking devices.
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of solid fuel burning independent boiler appliances.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16510-2-6:2023(Main)
Residential solid fuel burning appliances - Part 2-6: Mechanically by wood pellets fed roomheaters, inset appliances and cookers
EN 16510-2-6:2022

This document is applicable to mechanical by wood pellets fed roomheaters, inset appliances and cookers up to 50 kW nominal heat output.
The intended use of the appliances is space heating in residential buildings and can be cooking. They can be fitted with a boiler (integral part of the appliance containing water to be heated up) for the supply of hot water for central heating systems.
These appliances typically use auxiliary energy which is measured in this document as well. They can be operated with either natural draught or fan-assisted combustion air.
NOTE   A fan-assisted appliance does still operate under negative pressure in the flue gas system.
These appliances burn wood pellets only as specified. They only operate with the firedoors closed.
This document is not applicable to appliances:
-   with boiler intended for water systems having water temperatures above 110 °C and 3 bar;
-   with boiler intended for water systems having direct contact with sanitary hot water;
-   intended to be used with a pure horizontal exhaust (through the building wall);
-   with flue gas condensation in the appliance;
-   switching on/off for part load operation.
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of mechanical by wood pellets fed roomheaters, inset appliances and cookers.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16510-2-3:2023(Main)
Residential solid fuel burning appliances - Part 2-3: Cookers
EN 16510-2-3:2022

This document is applicable to cookers for solid fuel (hand fired residential cookers).
The intended use of the appliances is cooking and space heating in residential buildings. They can be fitted with a boiler (integral part of the appliance containing water to be heated up) for the supply of hot water for central heating systems.
These appliances can burn one or more types of the following solid fuels as specified:
-   wood logs;
-   compressed untreated wood;
-   wood pellets;
-   lignite briquettes;
-   solid mineral fuels;
-   peat briquettes.
This document is not applicable to appliances with fan assisted combustion air or appliances that are mechanically fed.
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of solid fuel burning cookers.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16510-2-1:2023(Main)
Residential solid fuel burning appliances - Part 2-1: Roomheaters
EN 16510-2-1:2022

This document is applicable to roomheaters for solid fuel (freestanding or inset solid fuel burning local space heating products that operate with fire doors either as closed only or as closed or open; insets without functional modification).
The intended use of the appliances is space heating in residential buildings. They can be fitted with a boiler (integral part of the appliance containing water to be heated up) for the supply of hot water for central heating systems.
These appliances can burn one or more types of the following solid fuels as specified:
-   wood logs;
-   compressed untreated wood;
-   wood pellets;
-   lignite briquettes;
-   solid mineral fuels;
-   peat briquettes.
This document is not applicable to appliances with fan assisted combustion air or appliances that are mechanically fed.
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of solid fuel burning roomheaters.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15821:2011(Main)
Multi firing Sauna stoves fired by solid fuel - Requirements and test methods
EN 15821:2010

This European Standard covers multi-firing sauna stoves in which the heating stones are separated from and indirectly heated by the fire and the flue gases and which may be re-fuelled with several fuel loads.
This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of multi-firing sauna stoves fired by wood logs and provides instructions for them. Furthermore, it also gives provisions for evaluation of conformity (i.e. initial type testing (ITT) and factory production control (FPC) and marking of these products.
This standard is applicable to hand-fuelled intermittent burning multi-firing sauna stoves, which provide heat into the space where they are installed.
These multi-firing sauna stoves may be supplied either as an assembled appliance or as a manufacturer’s pre-designed unit consisting of pre-fabricated components designed to be built on site in accordance with the manufacturer’s specified assembly instructions. One-off installations are not included.
These multi-firing sauna stoves may burn only natural wood logs in accordance with the appliance operating instructions.
Single-firing heat storage sauna stoves, in which the stones are directly heated by the fire and the flue gases, which pass through them, are not covered by this European Standard. This standard is also not applicable to mechanically fed sauna stoves, sauna stoves having fan assisted combustion air, sauna stoves fitted with a boiler, sauna stoves with incorporated flue or sauna stoves having any electrical connection.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 15883:2009(Main)
Residential solid fuel burning appliances - Emission test methods
CEN/TS 15883:2009

This European Technical Specification is applicable to residential heating and cooking appliances
burning solid fuels and details methods for the measurements of NOx, and OGC/total hydrocarbons
emissions and particulate and dust produced by these appliances and is to be used in conjunction
with the test methods given in the European Standards covering these appliances.
This European Technical Specification covers the NOx, and OGC/total hydrocarbons emission test
methods, however it does not cover input data and detailed calculation procedures.
For the particulate and dust emissions test methods, the national documents of those countries that
have a test method are reference methods which are summarised in Informative Annex A, whilst
those countries that do not have a specific test method, could choose one of these methods listed in
the annex.

  • Technical specification
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15250:2007
Slow heat release appliances fired by solid fuel - Requirements and test methods
EN 15250:2007

This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) instructions and marking together with associated test methods and test fuels for type testing residential slow heat release appliances fired by solid fuel.
This European Standard is applicable to hand fuelled intermittent burning slow heat release appliances having thermal storage capacity such that they can provide heat for a declared period of time after the fire has gone out. This European Standard also specifies a minimum time period from the appliance achieving the maximum differential surface temperature and falling to 50 % of that maximum value. These appliances provide heat into the space where they are installed.
These slow heat release appliances may be supplied either as an assembled appliance or as a manufacturer’s pre-designed unit consisting of pre-fabricated components designed to be built on site in accordance with the manufacturer’s specified assembly instructions. One off installations are not included.
These appliances may burn either solid mineral fuels, peat briquettes, natural or manufactured wood logs or be multi-fuel in accordance with the appliance manufacturer’s instructions. Wood pellets which are hand fuelled may also be burned either on the existing appliance bottomgrate or in a special basket arrangement which is placed by the user into the existing firebox.
This European Standard is not applicable to mechanically fed appliances, appliances having fan assisted combustion air or appliances with boiler.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day