SIST EN 6049-009:2025

SLOVENSKI STANDARD
01-november-2025
Aeronavtika - Električni kabli, namestitev - Zaščitne obojke iz meta-aramidnih
vlaken - 009. del: Samoovojna požarno zaščitna obojka, zvijava, z možnostjo
poznejše namestitve, delovna temperatura od –55 °C do 260 °C - Standard za
proizvod
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres
- Part 009: Self-wrapping fire protection sleeve, flexible, post-installation, operating
temperature from -55 °C to 260 °C - Product standard
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-
Aramidfasern - Teil 009: Selbstverschließender Schutzschlauch, flexibel, nachträglich
montierbar, Temperaturbereich von -55 °C bis 260 °C - Produktnorm
Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-
aramides - Partie 009 : Gaine de protection anti-feu auto-fermable, souple, après
montage, température d'utilisation de –55 °C à 260 °C - Norme de produit
Ta slovenski standard je istoveten z: EN 6049-009:2025
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 6049-009
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2025
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 6049-009:2016
English Version
Aerospace series - Electrical cables, installation -
Protection sleeve in meta-aramid fibres - Part 009: Self-
wrapping fire protection sleeve, flexible, post-installation,
operating temperature from -55 °C to 260 °C - Product
standard
Série aérospatiale - Câbles électriques, installation - Luft- und Raumfahrt - Elektrische Leitungen,
Gaine de protection en fibres méta-aramides - Partie Installation - Schutzschläuche aus Meta-Aramidfasern -
009 : Gaine de protection anti-feu auto-fermable, Teil 009: Selbstverschließender Schutzschlauch,
souple, après montage, température d'utilisation de - flexibel, nachträglich montierbar, Temperaturbereich
55 °C à 260 °C - Norme de produit von -55 °C bis 260 °C - Produktnorm
This European Standard was approved by CEN on 23 June 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6049-009:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
4.1 Requirements . 5
4.2 Composition . 5
4.3 Dimensions and mass . 8
4.4 Colour, materials and tracer line identification . 9
4.4.1 Colour . 9
4.4.2 Materials . 9
4.4.3 Tracer line identification . 9
4.4.4 Temperature range . 9
5 Test methods . 9
6 Designation . 11
7 Marking . 11
Bibliography . 12

European foreword
This document (EN 6049-009:2025) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by February 2025, and conflicting national standards shall be
withdrawn at the latest by February 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 6049-009:2016.
EN 6049-009:2016:
— prEN 6049-009 (P3), 01/2019 — Editorial improvements, reference to AS 23053C and
modification of the centre layer overlap angle from 130° to 90° for size code 10.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
1 Scope
This document specifies the characteristics of post installation flexible self-wrapping fire protection
sleeves for electrical cable and cable bundles, providing 360° fire protection to electrical harnesses. The
sleeve assembly gives fire resistance protection to the internal electrical harness against fire for five
minutes and ensures that the electrical characteristics of cables will not be degraded.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2825, Aerospace series — Burning behaviour of non metallic materials under the influence of radiating
heat and flames — Determination of smoke density
EN 2826, Aerospace series — Burning behaviour of non metallic materials under the influence of radiating
heat and flames — Determination of gas components in the smoke
EN 3844-1, Aerospace series — Flammability of non-metallic materials — Part 1: Small burner test,
vertical — Determination of the vertical flame propagation
EN 6049-001, Aerospace series — Electrical cables, installation — Protection sleeve in meta-aramid
fibres — Part 001: Technical specification
EN 6059-201, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods —
Part 201: Visual inspection
EN 6059-202, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods —
Part 202: Dimensions and mass
EN 6059-301, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods —
Part 301: Sun light exposure
EN 6059-302, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods —
Part 302: High temperature exposure
EN 6059-303, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods —
Part 303: Resistance to fluids
EN 6059-305, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods —
Part 305: F
...