SIST EN 14305:2010/kFprA1:2012
(Amendment)Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification
This European Standard specifies the requirements for factory made cellular glass products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately - 265 °C to + 430 °C.
The products are manufactured in the form of faced or unfaced boards, pipe sections, segments and prefabricated ware.
This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.
This standard does not specify the required level of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender.
Products with a declared thermal conductivity greater than 0,065 W/(m·K) at 10 °C are not covered by this standard.
This standard does not cover products for the insulation of the building structure.
Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische Anlagen in der Industrie - Werkmäßig hergestellte Produkte aus Schaumglas (CG) - Spezifikation
Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Produits manufacturés en verre cellulaire (CG) - Spécification
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije - Proizvodi iz penjenega stekla (CG) - Specifikacija
General Information
- Status
- Not Published
- Public Enquiry End Date
- 30-Aug-2012
- Technical Committee
- TOP - Thermal insulation
- Current Stage
- 98 - Abandoned project (Adopted Project)
- Start Date
- 15-Jul-2015
- Due Date
- 20-Jul-2015
- Completion Date
- 15-Jul-2015
- Directive
- Harmonized Standard305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Not Harmonized89/106/EEC - Construction products
Relations
- Effective Date
- 18-Jan-2023
Overview
SIST EN 14305:2010/kFprA1:2012 is a European standard dedicated to thermal insulation products for building equipment and industrial installations, specifically focusing on factory made cellular glass (CG) products. Prepared by SIST in line with CEN guidance, this standard details specifications and requirements for the manufacture and use of cellular glass insulation within an operating temperature range of approximately -265 °C to +430 °C. The document outlines various product forms, such as faced or unfaced boards, pipe sections, segments, and prefabricated ware. It also addresses conformity evaluation, testing procedures, marking, and labelling-ensuring uniformity and high quality for thermal insulation in demanding environments.
Key Topics
- Product Scope: Covers factory made cellular glass thermal insulation products for building equipment and industrial installations, including products in the form of boards, pipe sections, and prefabricated elements.
- Temperature Range: Effective within an extensive temperature range: -265 °C to +430 °C.
- Excluded Applications: Does not address the required level of performance for specific applications (these are set by national regulations or tender documents) and does not include products designed for the insulation of the building structure itself.
- Thermal Conductivity Limit: Only includes products with declared thermal conductivity of 0.065 W/(m·K) or lower at 10 °C.
- Conformity and Testing: Specifies procedures for testing, evaluation of conformity, and attestation procedures in line with European regulations such as Construction Products Regulation (CPR) no 305/2011.
- Marking and Labelling: Details requirements to ensure product traceability and regulatory compliance throughout the supply chain.
Applications
Cellular glass insulation products specified by SIST EN 14305:2010/kFprA1:2012 are widely used in:
- Building Equipment: Insulating pipes, ducts, and equipment to improve thermal efficiency and reduce energy loss in HVAC and plumbing systems.
- Industrial Installations: Providing high-performance insulation for process piping, tanks, and vessels exposed to extreme temperatures and demanding industrial conditions.
- Prefabricated Systems: Incorporated into modular insulation solutions and composite panels for enhanced safety, durability, and energy performance.
- Special Environments: Beneficial in settings requiring moisture resistance, fire safety, and chemical stability-key advantages of cellular glass material.
The standard serves manufacturers, contractors, and designers, ensuring reliable product performance and simplifying specification for critical thermal insulation projects.
Related Standards
For a comprehensive approach to thermal insulation and building equipment, consider these related standards:
- EN 14303: Mineral wool products for thermal insulation.
- EN 14313: Flexible elastomeric foam products for building and industrial insulation.
- EN 13468: Test methods for water absorption by immersion in insulation products.
- EN 12086: Determination of water vapour transmission properties in insulation products.
Understanding and applying SIST EN 14305:2010/kFprA1:2012 in combination with related standards ensures robust compliance, durability, and optimal performance for thermal insulation in demanding operational environments. For specific product property levels required in your project, always consult applicable building regulations and project specifications.
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
SIST EN 14305:2010/kFprA1:2012 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification". This standard covers: This European Standard specifies the requirements for factory made cellular glass products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately - 265 °C to + 430 °C. The products are manufactured in the form of faced or unfaced boards, pipe sections, segments and prefabricated ware. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,065 W/(m·K) at 10 °C are not covered by this standard. This standard does not cover products for the insulation of the building structure.
This European Standard specifies the requirements for factory made cellular glass products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately - 265 °C to + 430 °C. The products are manufactured in the form of faced or unfaced boards, pipe sections, segments and prefabricated ware. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,065 W/(m·K) at 10 °C are not covered by this standard. This standard does not cover products for the insulation of the building structure.
SIST EN 14305:2010/kFprA1:2012 is classified under the following ICS (International Classification for Standards) categories: 91.100.60 - Thermal and sound insulating materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14305:2010/kFprA1:2012 has the following relationships with other standards: It is inter standard links to SIST EN 14305:2010+A1:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 14305:2010/kFprA1:2012 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/103. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 14305:2010/kFprA1:2012 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2012
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije -
Proizvodi iz penjenega stekla (CG) - Specifikacija
Thermal insulation products for building equipment and industrial installations - Factory
made cellular glass (CG) products - Specification
Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische
Anlagen in der Industrie - Werkmäßig hergestellte Produkte aus Schaumglas (CG) -
Spezifikation
Produits isolants thermiques pour l'équipement du bâtiment et les installations
industrielles - Produits manufacturés en verre cellulaire (CG) - Spécification
Ta slovenski standard je istoveten z: EN 14305:2009/FprA1
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 14305:2009
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2012
ICS 91.100.60
English Version
Thermal insulation products for building equipment and industrial
installations - Factory made cellular glass (CG) products -
Specification
Produits isolants thermiques pour l'équipement du bâtiment Wärmedämmstoffe für die technische Gebäudeausrüstung
et les installations industrielles - Produits manufacturés en
und für betriebstechnische Anlagen in der Industrie -
verre cellulaire (CG) - Spécification Werkmäßig hergestellte Produkte aus Schaumglas (CG) -
Spezifikation
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 88.
This draft amendment A1, if approved, will modify the European Standard EN 14305:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent right
...