EURUSD
Your shopping cart is empty.
SIST

oSIST prEN IEC 60335-2-111:2026/oprAA:2026

(Amendment)

Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part

Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part

This European Standard deals with the safety of electric ondol-mattresses for household and similar purposes, their rated voltage being not more than 250 V including direct current (DC) supplied appliances and battery-operated appliances. This standard also applies to control units supplied with the appliance

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-111: Besondere Anforderungen für elektrische Ondol-Matratzen mit einem nicht flexiblen beheizten Teil

Appareils électrodomestiques et analogues - Sécurité - Part 2-111: Exigences particulières pour les matelas électriques ondol avec une partie chauffée non-flexible

Gospodinjski in podobni električni aparati - Varnost - 2-111. del: Posebne zahteve za grelne vzmetnice s togimi grelnimi elementi - Dopolnilo AA

General Information

Status
Not Published
Public Enquiry End Date
30-Jan-2026
ICS
13.120 - Domestic safety
97.030 - Domestic electrical appliances in general
97.100.10 - Electric heaters
97.140 - Furniture
Technical Committee
VGA - Safety of household and similar electrical appliances
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
28-Nov-2025
Due Date
17-Apr-2026
Ref Project
prEN IEC 60335-2-111:2025/prAA:2025 - Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part

Relations

Amends
oSIST prEN IEC 60335-2-111:2026 - Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part
Effective Date
07-Apr-2025
oSIST prEN IEC 60335-2-111:2026/oprAA:2026oSIST prEN IEC 60335-2-111:2026/oprAA:2026
PreviousNext
Draft
oSIST prEN IEC 60335-2-111:2026/oprAA:2026
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN IEC 60335-2-
111:2026/oprAA:2026
01-januar-2026
Gospodinjski in podobni električni aparati - Varnost - 2-111. del: Posebne zahteve
za grelne vzmetnice s togimi grelnimi elementi - Dopolnilo AA
Household and similar electrical appliances - Safety - Part 2-111: Particular requirements
for electric ondol mattress with a non-flexible heated part
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-111:
Besondere Anforderungen für elektrische Ondol-Matratzen mit einem nicht flexiblen
beheizten Teil
Appareils électrodomestiques et analogues - Sécurité - Part 2-111: Exigences
particulières pour les matelas électriques ondol avec une partie chauffée non-flexible
Ta slovenski standard je istoveten z: prEN IEC 60335-2-111:2025/prAA:2025
ICS:
13.120 Varnost na domu Domestic safety
97.030 Električni aparati za dom na Domestic electrical
splošno appliances in general
oSIST prEN IEC 60335-2- en
111:2026/oprAA:2026
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-111:2025
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
November 2025
ICS 13.120; 97.100.10; 97.140 -
English Version
Household and similar electrical appliances - Safety - Part 2-111:
Particular requirements for electric ondol mattress with a non-
flexible heated part
Appareils électrodomestiques et analogues - Sécurité - Part Sicherheit elektrischer Geräte für den Hausgebrauch und
2-111: Exigences particulières pour les matelas électriques ähnliche Zwecke - Teil 2-111: Besondere Anforderungen für
ondol avec une partie chauffée non-flexible elektrische Ondol-Matratzen mit einem nicht flexiblen
beheizten Teil
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 60335-2-111:2025; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2026-02-13.

It has been drawn up by CLC/TC 61.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 81703 Ref. No. prEN IEC 60335-2-111:2025/prAA:2025 E

Contents Page
19 European foreword . 3
20 1 Modification to the Introduction . 4
21 2 Modifications to Clause 1, “Scope" . 4
22 3 Modification to Clause 7, “Marking and instructions” . 4
23 4 Modifications to annexes . 4
24 5 Modification to Bibliography. 6
25 European foreword
26 This document (prEN IEC 60335-2-111:2025/prAA:2025) has been prepared by CLC/TC 61 "Safety of
27 household and similar electrical appliances".
28 This document is currently submitted to the Enquiry.
29 The following dates are proposed:
• latest date by which the existence of this document (doa) dav + 6 months
has to be announced at national level
• latest date by which this
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
oSIST prEN IEC 60335-2-111:2026(Main)
Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part
prEN IEC 60335-2-111:2025

This European Standard deals with the safety of electric ondol-mattresses for household and similar purposes, their rated voltage being not more than 250 V including direct current (DC) supplied appliances and battery-operated appliances. This standard also applies to control units supplied with the appliance

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 18035:2026(Main)
Prestressing steels - Waxed and sheathed strands for construction applications
EN 18035:2025

This document specifies the requirements for uncoated high strength steel strands of zinc or zinc alloy coated high strength steel strands, encapsulated with wax and a sheath for construction applications.
The document applies only to products as supplied by the manufacturer.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61643-11:2026(Main)
Low-voltage surge protective devices - Part 11: Surge protective devices connected to AC low-voltage power systems - Requirements and test methods (IEC 61643-11:2025)
EN IEC 61643-11:2025

IEC 61643-11:2025 is applicable to devices for surge protection against indirect and direct effects of lightning or other transient overvoltages.
These devices are intended to be connected to AC power circuits and equipment rated up to 1 000 V RMS, the preferred frequencies taken into account in this document are 50/60 Hz. Other frequencies are not excluded. Performance and safety requirements, tests and ratings are specified in this document. These devices contain at least one nonlinear component and are intended to limit surge voltages and divert surge currents.
The test requirements provided by this document are based on the assumption that the SPD is connected to an AC power circuit fed by a power source providing a linear voltage-current characteristic. When the SPD is to be connected to a different kind of source or to a different frequency, careful consideration is required. This mainly applies with regard to system and fault conditions to be expected in such a system (e.g. expected short circuit current, TOV-stresses).
This document can apply for railway applications, when related product standards do not exist for that area or for certain applications.
Based on a risk assessment it might not be necessary to apply all requirements of this document to SPDs designed for specific power applications only, e.g. circuits with a low power capability, circuits supplied by nonlinear sources, circuits with protective separation from the utility supply.
NOTE 1 More information on risk assessment is provided in IEC Guide 116.
NOTE 2 Other exclusions based on national regulations are possible.
This edition includes the following significant technical changes with respect to the previous edition:
a) Specific requirements for SPDs for AC applications are now contained in this document, whereas the common requirements for all SPDs are now contained in IEC 61643-01;
b) Clarification on test application either to a complete SPD, to a "mode of protection", or to a complete "SPD assembly";
c) Additional measurement of voltage protection level on "combined modes of protection" between live conductors and PE;
d) Additional duty test for T1 and T2 SPDs with follow current to check variation of the follow current value at lower impulse currents;
e) Modified and amended short circuit current test requirements to better cover up to date internal SPD disconnector technologies;
f) Improved dielectric test requirements for the SPD's main circuits and added dielectric test requirements for "electrically separated circuits";
g) Additional clearance requirements for "electrically separated circuits".
The requirements of this document supplement, modify or replace certain of the general requirements contained in IEC 61643-01 and shall be read and applied together with the latest edition of IEC 61643-01, as indicated by the undated normative reference in Clause 2 of this document.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12680-2:2026(Main)
Founding - Ultrasonic testing - Part 2: Steel castings for highly stressed components
EN 12680-2:2025

This document specifies the requirements for the ultrasonic testing of steel castings (with ferritic structure) for highly stressed components and the methods for determining internal discontinuities by the pulse-echo technique.
Highly-stressed means for example:
—   High material utilization (close to Rp0,2)
—   High static and cyclic load
—   For fail-safe assessment, requiring a fracture-mechanic assessment
An example for a highly-stressed cast component is a turbine housing, subjected to combined high static, cyclic and thermal load.
Purchasers determine if components are highly stressed based on the need for performance or safety.
For lower-stressed cast components for general purposes, EN 12680-1 applies.
This document is applicable to the ultrasonic testing of steel castings which have usually received a grain-refining heat treatment and which have wall thicknesses up to and including 600 mm.
For greater wall thicknesses, special agreements are applicable with respect to test procedure and recording levels.
This document does not apply to austenitic steels and joint welds.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13123-1:2026(Main)
Windows, doors, shutters and curtain walling - Explosion resistance - Requirements and classification - Part 1: Shock tube
EN 13123-1:2025

This document specifies the requirements and classification for assessing the explosive resistance of windows, doors, shutters as well as curtain walling elements, complete with their frames, infills and fixings, for use in both internal and external locations in buildings, when submitted to a shock tube test in accordance with EN 13124-1:2025. This document gives no information on the explosion resistance capacity of the wall or other surrounding structure.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13123-2:2026(Main)
Windows, doors, shutters and curtain walling - Explosion resistance - Requirements and classification - Part 2: Arena test
EN 13123-2:2025

This document specifies the requirements and classification for assessing the explosive resistance of windows, doors, shutters as well as curtain walling elements, complete with their frames, infills and fixings, for use in both internal and external locations in buildings, when submitted to an arena test in accordance with EN 13124-2:2025. This document gives no information on the explosion resistance capacity of the wall or other surrounding structure.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12680-3:2026(Main)
Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings
EN 12680-3:2025

This document specifies the requirements for the ultrasonic testing of spheroidal graphite cast iron castings and the techniques for determining internal discontinuities by the pulse-echo technique.
This document does not apply to ultrasonic testing of the nodularity of spheroidal graphite cast irons.
This document does not apply to phased array technique and to transmission technique.
NOTE   The transmission technique has insufficient sensitivity to detect the discontinuities found in spheroidal graphite cast iron castings and is used in exceptional cases only.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12680-1:2026(Main)
Founding - Ultrasonic testing - Part 1: Steel castings for general purposes
EN 12680-1:2025

This document specifies the requirements for the ultrasonic testing of steel castings (with ferritic structure) for general purposes and the methods for determining internal discontinuities by the pulse-echo technique.
This document is applicable to the ultrasonic testing of steel castings which have usually received a grain refining heat treatment and which have wall thicknesses up to and including 600 mm.
For greater wall thicknesses, special agreements are applicable with respect to test procedure and recording levels.
This document does not apply to austenitic steels and joint welds. For highly stressed components EN 12680-2 is applicable.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61643-11:2026/A11:2026(Amendment)
Low-voltage surge protective devices - Part 11: Surge protective devices connected to AC low-voltage power systems - Requirements and test methods
EN IEC 61643-11:2025/A11:2025
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3991:2026(Main)
Agricultural machinery - Robotic feed systems - Safety (ISO 3991:2025)
EN ISO 3991:2025

This document specifies the safety requirements and their verification for the design and construction of robotic feed systems (RFS) (see Annex A), which distribute feed and perform at least one of the following functions without the need of human interaction:
—     storing of feed;
—     loading of mobile feed unit (MFU);
—     mixing;
—     travelling;
—     cleaning (residual feed);
—     pushing feed.
Additionally, it provides the type of information, to be provided by the manufacturer, on safe working practices (including information about residual risks).
This document is for feeding livestock (e.g. cows, sheep, pigs).
This document does not apply to:
—     systems designed to be used at a fixed location and that discharge feed at a remote location (e.g. chain conveyor feed systems, belt conveyor feed systems or liquid feed systems);
—     tractors;
—     systems designed for field application.
This document deals with all the significant hazards, hazardous situations and events relevant to RFS, see Annex B, when they are used as intended and under the conditions of misuse, which are reasonably foreseeable, by the manufacturer as listed in Clause 4, except for the hazards arising from:
—     internal combustion engines of RFS;
—     requirements for the connections to the main electric power supply;
—     RFS with interchangeable equipment;
—     emission of airborne noise.
NOTE 1        Hazards related to internal combustion engines of robotic feed systems (e.g. exhaust emissions in buildings) will be considered in separate standards
NOTE 2        The main electric power supply is subject to national regulations or codes
NOTE 3        Sudden loud noises may cause farm animals to become startled. It is advised to consider this with the design of the RFS.
Environmental aspects (except noise) have not been considered in this document.
This document is not applicable to feed systems manufactured before the date of its publication.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day