oSIST prEN IEC 61360-7:2025

SLOVENSKI STANDARD
01-oktober-2025
Standardni tipi podatkovnih elementov s pripadajočo klasifikacijsko shemo - 7.
del: Slovar podatkov meddomenskih konceptov (IEC 61360-7:2024)
Standard data element types with associated classification scheme - Part 7: Data
dictionary of cross-domain concepts (IEC 61360-7:2024)
Genormte Datenelementtypen mit Klassifikationsschema für elektrische Betriebsmittel -
Teil 7: Datenbeschreibungsverzeichnis für domänenübergreifende Konzepte (IEC 61360
-7:2024)
Types normalisés d’éléments de données avec plan de classification - Partie 7 :
Dictionnaire de données des concepts interdomaines (IEC 61360-7:2024)
Ta slovenski standard je istoveten z: prEN IEC 61360-7:2025
ICS:
01.040.29 Elektrotehnika (Slovarji) Electrical engineering
(Vocabularies)
29.100.20 Električni in elektromehanski Electrical and
sestavni deli electromechanical
components
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD DRAFT
prEN IEC 61360-7
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2025
ICS 01.110; 25.040.40; 31.020 -
English Version
Standard data element types with associated classification
scheme - Part 7: Data dictionary of cross-domain concepts
(IEC 61360-7:2024)
Types normalisés d’éléments de données avec plan de Genormte Datenelementtypen mit Klassifikationsschema für
classification – Partie 7 : Dictionnaire de données des elektrische Betriebsmittel - Teil 7:
concepts interdomaines Datenbeschreibungsverzeichnis für domänenübergreifende
(IEC 61360-7:2024) Konzepte
(IEC 61360-7:2024)
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2025-10-31.

The text of this draft consists of the text of IEC 61360-7:2024.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 81202 Ref. No. prEN IEC 61360-7:2025 E

European foreword
This document (prEN IEC 61360-7:2025) consists of the text of IEC 61360-7:2024 prepared by SC 3D
"Classes, Properties and Identification of products - Common Data Dictionary (CDD)" of IEC/TC 3
"Documentation, graphical symbols and representations of technical information".
This document is currently submitted to the Enquiry.
The following dates are proposed:
• latest date by which the existence of this document has (doa) dav+ 6 months
to be announced at national level
• latest date by which this document has to be (dop) dav+ 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards conflicting (dow) dav+ 36 months
with this document have to be withdrawn (to be confirmed or
modified when voting)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
ISO/TS 29002-5 2009 Industrial automation systems and - -
integration - Exchange of characteristic
data - Part 5: Identification scheme

IEC 61360-7 ®
Edition 1.0 2024-01
INTERNATIONAL
STANDARD
HORIZONTAL PUBLICATION
Standard data element types with associated classification scheme –

Part 7: Data dictionary of cross-domain concepts

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 01.110; 25.040.40; 31.020 ISBN 978-2-8322-8130-7

– 2 – IEC 61360-7:2024 © IEC 2024
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviated terms . 6
3.1 Terms and definitions . 6
3.2 Abbreviated terms . 7
4 IEC 61360-7 data dictionary (domain) . 7
4.1 Overview and generic concepts . 7
4.2 Further development and maintenance . 10
Bibliography . 11

Table 1 – Generic structures . 8
Table 2 – Library of properties with attributes . 9

IEC 61360-7:2024 © IEC 2024 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
STANDARD DATA ELEMENT TYPES
WITH ASSOCIATED CLASSIFICATION SCHEME –

Part 7: Data dictionary of cross-domain concepts

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest ed
...