SIST EN 2400:2020
(Main)Aerospace series - Heat resisting nickel base alloy Ni-P96-HT - Cold drawn and precipitation treated - Wires D ≤ 10 mm
Aerospace series - Heat resisting nickel base alloy Ni-P96-HT - Cold drawn and precipitation treated - Wires D ≤ 10 mm
This document specifies the requirements relating to:
Heat resisting nickel base alloy Ni-P96-HT
Cold drawn and precipitation treated
Wire
D ≤ 10 mm
for aerospace applications.
Luft- und Raumfahrt - Hochwarmfeste Nickelbasislegierung Ni-P96-HT - Kaltgezogen und Ausgelagert - Draht D ≤ 10 mm
Dieses Dokument legt die Anforderungen an:
Hochwarmfeste Nickelbasislegierung Ni-P96-HT
Kaltgezogen und ausgehärtet
Draht
D ≤ 10 mm
für Anwendungen in der Luft- und Raumfahrt fest.
Série aérospatiale - Alliage résistant à chaud à base de nickel Ni-P96-HT - Écroui et précipité - Fils D ≤ 10 mm
Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud à base de nickel Ni-P96-HT
Étiré à froid et précipité
Fil
D ≤ 10 mm
pour applications aérospatiales.
Aeronavtika - Toplotnoodporne zlitine na nikljevi osnovi Ni-P96-HT - Hladno vlečene in izločevalno utrjene - Žice D ≤ 10 mm
Ta dokument določa zahteve, ki se navezujejo na: toplotno odporne zlitine na nikljevi osnovi Ni-P96-HT, hladno vlečene in izločevalno utrjene, žice, D ≤ 10 mm, za uporabo v aeronavtiki.
General Information
- Status
- Published
- Publication Date
- 11-Dec-2019
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 06-Dec-2019
- Due Date
- 10-Feb-2020
- Completion Date
- 12-Dec-2019
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
SIST EN 2400:2020 defines the requirements for heat resisting nickel base alloy Ni-P96-HT wires, specifically those that are cold drawn and precipitation treated, with diameters up to 10 mm. Developed by SIST (Slovenian Institute for Standardization), this standard is aligned with the European standard EN 2400:2019. The primary application of this specification is within the aerospace industry, where high-performance, heat-resistant materials are critical for safety, reliability, and durability.
Key Topics
- Material Specification: The standard covers cold drawn and precipitation treated wires made from the heat resisting nickel base alloy Ni-P96-HT, ensuring consistent mechanical and chemical properties for aerospace use.
- Dimensional Limits: Applicable to wires with diameters (D) less than or equal to 10 mm, making it suitable for a variety of aerospace manufacturing and assembly purposes.
- Production Methods: Specifies allowable production processes, including air melt, vacuum refine, or consumable electrode remelt, to achieve the required material purity and performance.
- Testing and Inspection: Outlines mechanical property verification, reverse torsion and wrapping tests, as well as marking and dimensional inspections to validate product conformity.
- Quality Assurance: Emphasizes product qualification, with specific testing programs agreed upon between manufacturer and purchaser, facilitating consistent quality in aerospace supply chains.
Applications
- Aerospace Engineering: Used in the fabrication of components that require high heat resistance and strength at elevated temperatures, such as engine parts, fasteners, and control systems.
- High-Performance Environments: Ideal for critical applications where exposure to extreme temperatures and demanding mechanical loads is common.
- Manufacturing and Maintenance: Supports both new builds and routine maintenance operations by providing reliable standards for replacement parts or upgrades in aircraft systems.
Utilizing nickel base alloy Ni-P96-HT wires as specified in SIST EN 2400:2020 ensures that aerospace manufacturers and maintenance providers comply with stringent industry regulations, helping to maintain safety and functionality in aviation operations.
Related Standards
- EN 2369: Specifies dimensions for heat resisting alloy wires with diameters between 0.2 mm and 8 mm, complementing the scope of EN 2400.
- EN 4700-004: Covers technical specifications for wrought steel and heat resisting alloy wires, providing additional details for product requirements.
- EN 4258: Outlines the general organization of standardization for aerospace metallic materials.
- EN 4500-003: Details rules for drafting and presenting material standards for heat resisting alloys in the aerospace sector.
Practical Value
Adhering to SIST EN 2400:2020 allows aerospace sector manufacturers and stakeholders to:
- Ensure product reliability through standardized material performance and rigorous testing protocols
- Facilitate international trade and sourcing of nickel base alloy wires by relying on harmonized European standards
- Streamline certification and qualification processes for both suppliers and purchasers
- Promote safety and longevity in aerospace applications where material failure is not an option
Implementing this standard demonstrates a commitment to quality, safety, and best practices within the international aerospace community.
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
BUREAU VERITAS Certification Germany
Bureau Veritas certification in Germany.
AQMS Ltd.
AQMS provides ISO certification to SMEs across the UK.
Sponsored listings
Frequently Asked Questions
SIST EN 2400:2020 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Heat resisting nickel base alloy Ni-P96-HT - Cold drawn and precipitation treated - Wires D ≤ 10 mm". This standard covers: This document specifies the requirements relating to: Heat resisting nickel base alloy Ni-P96-HT Cold drawn and precipitation treated Wire D ≤ 10 mm for aerospace applications.
This document specifies the requirements relating to: Heat resisting nickel base alloy Ni-P96-HT Cold drawn and precipitation treated Wire D ≤ 10 mm for aerospace applications.
SIST EN 2400:2020 is classified under the following ICS (International Classification for Standards) categories: 49.025.15 - Non-ferrous alloys in general; 77.120.40 - Nickel, chromium and their alloys. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 2400:2020 has the following relationships with other standards: It is inter standard links to SIST EN 2369:2018, SIST EN 4700-004:2026. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 2400:2020 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2020
Aeronavtika - Toplotnoodporne zlitine na nikljevi osnovi Ni-P96-HT - Hladno
vlečene in izločevalno utrjene - Žice D ≤ 10 mm
Aerospace series - Heat resisting nickel base alloy Ni-P96-HT - Cold drawn and
precipitation treated - Wires D ≤ 10 mm
Luft- und Raumfahrt - Hochwarmfeste Nickelbasislegierung Ni-P96-HT - Kaltgezogen
und Ausgelagert - Draht D ≤ 10 mm
Série aérospatiale - Alliage résistant à chaud à base de nickel Ni-P96-HT - Écroui et
précipité - Fils D ≤ 10 mm
Ta slovenski standard je istoveten z: EN 2400:2019
ICS:
49.025.15 Neželezove zlitine na Non-ferrous alloys in general
splošno
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 2400
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2019
EUROPÄISCHE NORM
ICS 49.025.15
English Version
Aerospace series - Heat resisting nickel base alloy NI-P96-
HT - Cold drawn and precipitation treated - Wire - D ≤ 10
mm
Série aérospatiale - Alliage résistant à chaud à base de Luft- und Raumfahrt - Hochwarmfeste
nickel NI-P96-HT - Étiré à froid et précipité - Fil - D ≤ Nickelbasislegierung NI-P96-HT - Kaltgezogen und
10 mm ausgehärtet - Draht - D ≤ 10 mm
This European Standard was approved by CEN on 8 July 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2400:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
European foreword
This document (EN 2400:2019) has been prepared by the Aerospace and Defence Industries Association
of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2020, and conflicting national standards shall be
withdrawn at the latest by May 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the nation
...