SIST EN IEC 60601-2-22:2020/oprAA:2025

SLOVENSKI STANDARD
01-julij-2025
Medicinska električna oprema - 2-22. del: Posebne varnostne zahteve ter bistvene
lastnosti kirurške, kozmetične, terapevtske in diagnostične laserske opreme -
Dopolnilo AA
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and
essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
Medizinische elektrische Geräte - Teil 2-22: Besondere Festlegungen für die Sicherheit
einschließlich der wesentlichen Leistungsmerkmale für chirurgische, kosmetische,
therapeutische und diagnostische Lasergeräte
Appareils électromédicaux - Partie 2-22: Exigences particulières pour la sécurité de base
et les performances essentielles des appareils chirurgicaux, esthétiques, thérapeutiques
et de diagnostic à laser
Ta slovenski standard je istoveten z: EN IEC 60601-2-22:2020/prAA:2025
ICS:
11.040.55 Diagnostična oprema Diagnostic equipment
11.040.60 Terapevtska oprema Therapy equipment
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN IEC 60601-2- en
22:2020/oprAA:2025
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD DRAFT
EN IEC 60601-2-22:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
June 2025
ICS 11.040.01; 31.260 -
English Version
Medical electrical equipment - Part 2-22: Particular requirements
for basic safety and essential performance of surgical, cosmetic,
therapeutic and diagnostic laser equipment
Appareils electromedicaux - Partie 2-22: Exigences Medizinische elektrische Geräte - Teil 2-22: Besondere
particulières pour la sécurité de base et les performances Festlegungen für die Sicherheit einschließlich der
essentielles des appareils chirurgicaux, esthétiques, wesentlichen Leistungsmerkmale für chirurgische,
thérapeutiques et de diagnostic à laser kosmetische, therapeutische und diagnostische
Lasergeräte
This draft amendment prAA, if approved, will modify the European Standard EN IEC 60601-2-22:2020; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2025-08-29.

It has been drawn up by CLC/TC 76.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 79318 Ref. No. EN IEC 60601-2-22:2020/prAA:2025 E

Contents Page
1 European foreword . 3
2 Annex ZA (normative) Normative references to international publications with their corresponding
3 European publications . 4
4 Annex ZB (informative) Relationship between this European standard and the General Safety and
5 Performance Requirements of Regulation (EU) 2017/745 aimed to be covered . 5
6 European foreword
7 This document EN IEC 60601-2-22:2020/prAA:2025 has been prepared by CLC/TC 76 "Optical radiation safety
8 and laser equipment”.
9 This document is currently submitted to the Enquiry.
10 The following dates are proposed:
• latest date by which the existence of this (doa) dav + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dav + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
11 This document has been prepared under a standardization request addressed to CENELEC by the European
12 Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
13 Member States.
14 For the relationship with EU Legislation, see informative Annex ZZ, which is an integral part of this document.
15 Collateral standards in the IEC 60601 series are numbered IEC 60601-1-xx. The IEC maintains a catalogue of
16 valid International Standards. Users of this document can consult this catalogue at "http://webstore.iec.ch" to
17 determine which collateral standards have been published.
18 Annex ZA
19 (normative)
21 Normative references to international publications with their
22 corresponding European publications
23 The following documents are referred to in the text in such a way that some or all of their content constitutes
24 requirements of this document. For dated references, only the edition cited applies. For undated references, the
25 latest edition of the referenced document (including any amendments) applies.
26 NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
27 relevant EN/HD applies.
28 NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
29 www.cencenelec.eu.
30 The Annex ZA of EN 60601-1:2006/A13:2024 applies with the following additions:
Publication Year Title EN/HD Year
IEC 60601-1 2005 Medical electrical equipment - Part 1: General EN 60601-1 2006
requirements for basic safety and essential
performance
- - + corrigendum Mar. 2010
+ A1 2012 + A1 2013
+ A1:2013/AC 2014
- - + A12 2014
+ A2 2021
+ AC 2022-
+ A13 2024
IEC 60825-1 2014 Safety of laser products - Part 1: Equipment EN 60825-1 2014
classification and requireme
...