ISO 4484-3:2023
(Main)Textiles and textile products — Microplastics from textile sources — Part 3: Measurement of collected material mass released from textile end products by domestic washing method
Textiles and textile products — Microplastics from textile sources — Part 3: Measurement of collected material mass released from textile end products by domestic washing method
This document specifies a method for measuring the collected material mass released from the outlet hose of a standard washing machine, described in ISO 6330, through the washing process. NOTE The washing condition of textile end products is indicated by the care labelling according to ISO 3758. This document is applicable to textile end products (including consumer textile products, such as clothing made of fleece, shirts, trousers, blouse, etc.) and home textile end products (such as, blankets, rugs, curtains, etc.) which are composed of all fibres such as natural fibres, and man-made fibres, including mixture of the fibres that can be washed in a domestic washing machine. This document is not applicable to fabrics and cut textile products. It does not cover the test for washing machines and detergents as well.
Textiles et produits textiles — Microplastiques d'origines textiles — Partie 3: Mesurage de la masse de matériaux collectés libérés par les produits finis textiles par la méthode de lavage domestique
Le présent document spécifie une méthode de mesurage de la masse de matériaux collectés libérés en sortie du tuyau d’évacuation d’une machine à laver normalisée conforme à l’ISO 6330 lors du processus de lavage. NOTE Les conditions de lavage des produits finis textiles sont indiquées par l’étiquetage d’entretien conformément à l’ISO 3758. Le présent document est applicable aux produits finis textiles (incluant les produits textiles destinés aux consommateurs, tels que les vêtements molletonnés, chemises, pantalons, chemisiers, etc.) et aux produits finis textiles domestiques (tels que les couvertures, tapis, rideaux, etc.) confectionnés à partir de fibres de tous types telles que des fibres naturelles et les fibres chimiques, y compris un mélange des fibres, qui peuvent être lavés dans un lave-linge domestique. Le présent document ne s’applique pas aux étoffes et produits textiles découpés. Il ne couvre pas non plus l’essai des lave-linges et des détergents.
General Information
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 4484-3
First edition
2023-05
Textiles and textile products —
Microplastics from textile sources —
Part 3:
Measurement of collected material
mass released from textile end
products by domestic washing method
Textiles et produits textiles — Microplastiques d'origines textiles —
Partie 3: Mesurage de la masse de matériaux collectés libérés par les
produits finis textiles par la méthode de lavage domestique
Reference number
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Reagents . 3
7 Test condition .3
7.1 Standard atmosphere for preparation of test specimens and mass measurement . 3
7.2 Test atmosphere for washing test . 3
8 Test specimen preparation . 3
9 Test procedure .3
9.1 General . 3
9.2 Empty washing cycle before the washing test . 3
9.3 Washing test of the test specimen . . 4
9.4 Washing of the collected material from the filter bag. 4
9.5 Measurement of the mass of the collected materials . 4
10 Calculation . 5
10.1 Calculation for each test run . 5
10.2 Calculation of average for 3 test runs . 5
11 Repeatability and reproducibility .5
12 Test report . 6
Annex A (informative) Filter fabric specification and filter bag construction .7
Annex B (normative) Requirements of the washing machine to be used in this test .9
Annex C (informative) Number of empty washing cycles after test washing .12
Annex D (informative) Reference detergent .13
Annex E (informative) Condition of the multiple washing cycle test and example of the test
result .14
Annex F (informative) Interlaboratory trial .17
Annex G (informative) Number of test specimens .22
Annex H (informative) Collection percentage of the fibre fragments .25
Annex I (informative) Filter aperture size .26
Bibliography .28
iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use
of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had received notice
of a patent which may be required to implement this document. However, implementers are cautioned
that this may not represent the latest information, which may be obtained from the patent database
available at www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent
rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 38, Textiles, in collaboration with the
European Committee for Standardization (CEN) Technical Committee CEN/TC 248, Textiles and textile
products, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
A list of all parts in the ISO 4484 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
Introduction
Daily washing of textile end products generates fibre fragments which are discharged from washing
machine. The purpose of this test method is to collect materials including fibre fragments which are
discharged from the domestic washing machine through the washing process.
Although there are many types of washing machines used at home, ISO 6330 has been developed for
the domestic washing test method, which specifies the domestic washing machines and test conditions.
This document utilizes one of the standard washing machines in ISO 6330.
In addition, a care label is attached to textile end products in many countries of the world and this care
label specifies washing conditions to use in this document.
Due to the complicated internal structure of washing machines, the cleaning process of the machine
is very important to avoid contamination. This document proposes the checking method and the
requirements of the washing machine to be used in this document.
The identification and quantification of components contained in the collected materials through the
washing process are determined by applying ISO 4484-2.
The information gathered from this document can be utilized by the textile industry for the development
of textile end products to reduce or minimize shedding materials from textile end products through the
washing process.
v
INTERNATIONAL STANDARD ISO 4484-3:2023(E)
Textiles and textile products — Microplastics from textile
sources —
Part 3:
Measurement of collected material mass released from
textile end products by domestic washing method
1 Scope
This document specifies a method for measuring the collected material mass released from the outlet
hose of a standard washing machine, described in ISO 6330, through the washing process.
NOTE The washing condition of textile end products is indicated by the care labelling according to ISO 3758.
This document is applicable to textile end products (including consumer textile products, such as
clothing made of fleece, shirts, trousers, blouse, etc.) and home textile end products (such as, blankets,
rugs, curtains, etc.) which are composed of all fibres such as natural fibres, and man-made fibres,
including mixture of the fibres that can be washed in a domestic washing machine.
This document is not applicable to fabrics and cut textile products. It does not cover the test for washing
machines and detergents as well.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 139, Textiles — Standard atmospheres for conditioning and testing
ISO 3696, Water for analytical laboratory use — Specification and test methods
ISO 3758, Textiles — Care labelling code using symbols
ISO 6330:2021, Textiles — Domestic washing and drying procedures for textile testing
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
collected material
material collected by the filter attached at the outlet hose of a washing machine through the washing
process, which include fibre fragments and non-water-soluble materials
3.2
empty washing cycle
washing cycle without test specimens by using the test washing program
4 Principle
A given mass of textile end products is washed in a domestic washing machine under certain
temperature and mechanical conditions for a given number of washing cycles. The material shed
through the washing cycles is collected in a filter bag which is attached at the outlet hose of the
washing machine. The collected materials in filter bag are transferred to the membrane filter and the
membrane filter with the collected mat
...
NORME ISO
INTERNATIONALE 4484-3
Première édition
2023-05
Textiles et produits textiles —
Microplastiques d'origines textiles —
Partie 3:
Mesurage de la masse de matériaux
collectés libérés par les produits finis
textiles par la méthode de lavage
domestique
Textiles and textile products — Microplastics from textile sources —
Part 3: Measurement of collected material mass released from textile
end products by domestic washing method
Numéro de référence
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2023
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives .1
3 Termes et définitions . 1
4 Principe. 2
5 Appareillage . 2
6 Réactif . 3
7 Condition d’essai . 3
7.1 Atmosphère normale pour la préparation des éprouvettes d’essai et le mesurage
de la masse . 3
7.2 Atmosphère d’essai pour l’essai de lavage . 3
8 Préparation des éprouvettes d’essai . 3
9 Mode opératoire d’essai . 3
9.1 Généralités . 3
9.2 Cycle de lavage à vide avant l’essai de lavage . 4
9.3 Essai de lavage de l’éprouvette d’essai . 4
9.4 Lavage des matériaux collectés par le sac filtrant . 4
9.5 Mesurage de la masse des matériaux collectés . 4
10 Calcul . 5
10.1 Calcul pour chaque essai . 5
10.2 Calcul de la moyenne des 3 essais . 5
11 Répétabilité et reproductibilité . 6
12 Rapport d’essai . 6
Annexe A (informative) Spécification de l’étoffe et construction du sac filtrant .7
Annexe B (normative) Exigences concernant la machine à laver à utiliser pour cet essai .9
Annexe C (informative) Nombre de cycles de lavage à vide après le lavage d’essai .12
Annexe D (informative) Détergent de référence .13
Annexe E (informative) Condition de l’essai à plusieurs cycles de lavage et exemple de
résultat d’essai .14
Annexe F (informative) Essai interlaboratoires .17
Annexe G (informative) Nombre d’éprouvettes d’essai .22
Annexe H (informative) Pourcentage de collecte des fragments de fibre .25
Annexe I (informative) Ouverture de maille du filtre .26
Bibliographie .28
iii
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a
été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir
www.iso.org/directives).
L’ISO attire l’attention sur le fait que la mise en application du présent document peut entraîner
l’utilisation d’un ou de plusieurs brevets. L’ISO ne prend pas position quant à la preuve, à la validité
et à l’applicabilité de tout droit de brevet revendiqué à cet égard. À la date de publication du présent
document, l’ISO avait reçu notification qu’un ou plusieurs brevets pouvaient être nécessaires à sa
mise en application. Toutefois, il y a lieu d’avertir les responsables de la mise en application du présent
document que des informations plus récentes sont susceptibles de figurer dans la base de données de
brevets, disponible à l'adresse www.iso.org/brevets. L’ISO ne saurait être tenue pour responsable de ne
pas avoir identifié tout ou partie de tels droits de propriété.
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion
de l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir www.iso.org/avant-propos.
Le présent document a été élaboré par le comité technique ISO/TC 38, Textiles, en collaboration avec le
comité technique CEN/TC 248, Textiles et produits textiles, du Comité européen de normalisation (CEN),
conformément à l’Accord de coopération technique entre l’ISO et le CEN (Accord de Vienne).
Une liste de toutes les parties de la série ISO 4484 se trouve sur le site web de l’ISO.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes
se trouve à l’adresse www.iso.org/fr/members.html.
iv
Introduction
Le lavage quotidien des produits finis textiles génère des fragments de fibre qui sont évacués du lave-
linge. La présente méthode d’essai vise à collecter les matériaux incluant des fragments de fibre qui
sont évacués du lave-linge domestique lors du processus de lavage.
Même si les lave-linges utilisés à domicile sont de types très divers, l’ISO 6330 a été élaborée pour
spécifier la méthode d’essai de lavage domestique, laquelle définit les machines à laver domestiques
et les conditions d’essai. Le présent document recourt à l’une des machines à laver normalisées de
l’ISO 6330.
En outre, une étiquette d’entretien est apposée sur les produits finis textiles dans bon nombre de pays
à travers le monde et cette étiquette d’entretien spécifie les conditions de lavage à utiliser dans le cadre
du présent document.
En raison de la structure interne complexe des machines à laver, le processus de nettoyage de la
machine est un aspect très important pour éviter une contamination. Le présent document indique
la méthode de vérification et les exigences concernant la machine à laver à utiliser dans le cadre du
présent document.
L’identification et la quantification de composés contenus dans les matériaux collectés lors du processus
de lavage sont déterminées en appliquant l’ISO 4484-2.
Les informations recueillies à l’aide du présent document peuvent être utilisées par l’industrie textile
dans le cadre du développement de produits finis textiles afin de limiter ou de réduire le plus possible
les pertes de matières des produits finis textiles lors du processus de lavage.
v
NORME INTERNATIONALE ISO 4484-3:2023(F)
Textiles et produits textiles — Microplastiques d'origines
textiles —
Partie 3:
Mesurage de la masse de matériaux collectés libérés
par les produits finis textiles par la méthode de lavage
domestique
1 Domaine d’application
Le présent document spécifie une méthode de mesurage de la masse de matériaux collectés libérés en
sortie du tuyau d’évacuation d’une machine à laver normalisée conforme à l’ISO 6330 lors du processus
de lavage.
NOTE Les conditions de lavage des produits finis textiles sont indiquées par l’étiquetage d’entretien
conformément à l’ISO 3758.
Le présent document est applicable aux produits finis textiles (incluant les produits textiles destinés
aux consommateurs, tels que les vêtements molletonnés, chemises, pantalons, chemisiers, etc.) et aux
produits finis textiles domestiques (tels que les couvertures, tapis, rideaux, etc.) confectionnés à partir
de fibres de tous types telles que des fibres naturelles et les fibres chimiques, y compris un mélange des
fibres, qui peuvent être lavés dans un lave-linge domestique.
Le présent document ne s’applique pas aux étoffes et produits textiles découpés. Il ne couvre pas non
plus l’essai des lave-linges et des détergents.
2 Références normatives
Les documents suivants sont cités dans le texte de sorte qu’ils constituent, pour tout ou partie de leur
contenu, des exigences du présent document. Pour les références datées, seule l’édition citée s’applique.
Pour les références non datées, la dernière édition du document de référence s'applique (y compris les
éventuels amendements).
ISO 139, Textiles — Atmosphères normales de conditionnement et d'essai
ISO 3696, Eau pour laboratoire à usage analytique — Spécification et méthodes d'essai
ISO 3758, Textiles — Code d’étiquetage d’entretien au moyen de symboles
ISO 6330:2021, Textiles — Méthodes de lavage et de séchage domestiques en vue des essais des textiles
3 Termes et définitions
Pour les besoins du présent document, les termes et définitions suivants s’appliquent.
L’ISO et l’IEC tiennent à jour des b
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.