iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 5725-5:1998/Cor 1:2005

(Corrigendum)

Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method — Technical Corrigendum 1

Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method — Technical Corrigendum 1

Exactitude (justesse et fidélité) des résultats et méthodes de mesure — Partie 5: Méthodes alternatives pour la détermination de la fidélité d'une méthode de mesure normalisée — Rectificatif technique 1

Točnost (pravilnost in natančnost) merilnih metod in rezultatov – 5. del: Alternativne metode določanja natančnosti standardne merilne metode – Tehnični popravek 1

General Information

Status
Published
Publication Date
21-Aug-2005
ICS
03.120.30 - Application of statistical methods
17.020 - Metrology and measurement in general
Technical Committee
ISO/TC 69/SC 6 - Measurement methods and results
Drafting Committee
ISO/TC 69/SC 6/WG 1 - Accuracy of measurement methods and results
Current Stage
9599 - Withdrawal of International Standard
Start Date
10-Oct-2025
Completion Date
30-Oct-2025
Ref Project
SIST ISO 5725-5:2003/C1:2006 - ISO 5725-5:1998/Cor 1:2005

Relations

Corrects
ISO 5725-5:1998 - Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
Effective Date
06-Jun-2022
Revised
ISO 5725-5:2025 - Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
Effective Date
23-Apr-2020
Child
SIST ISO 5725-5:2003 - Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method
Effective Date
12-May-2008
Child
ISO 5725-5:1998 - Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
Effective Date
15-Apr-2008
ISO 5725-5:2003/C1:2006ISO 5725-5:2003/C1:2006
PreviousNext
Corrigendum
ISO 5725-5:2003/C1:2006
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.ISO 5725-5:1998/Cor 1:200517.020Meroslovje in merjenje na splošnoMetrology and measurement in general03.120.30Application of statistical methodsICS:Ta slovenski standard je istoveten z:ISO 5725-5:1998/Cor 1:2005SIST ISO 5725-5:2003/C1:2006en01-april-2006SIST ISO 5725-5:2003/C1:2006SLOVENSKI
STANDARD
ICS
03.120.30;
17.020 Ref. No. ISO 5725-5:1998/Cor.1:2005(E)©
ISO 2005 – All rights reserved Published in Switzerland
INTERNATIONAL STANDARD ISO 5725-5:1998 TECHNICAL CORRIGENDUM 1 Published 2005-08-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION •
• ORGANISATION INTERNATIONALE DE NORMALISATION
Accuracy (trueness and precision) of measurement methods and results
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 11843-6:2025(Main)
Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations

This document presents methods for determining the critical value of the response variable and the minimum detectable value in Poisson distribution measurements. It is applicable when variations in both the background noise and the signal are describable by the Poisson distribution. The conventional approximation is used to approximate the Poisson distribution by the normal distribution consistent with ISO 11843-3 and ISO 11843-4. The accuracy of the normal approximation as compared to the exact Poisson distribution is discussed in Annex B.

  • Standard
    21 pages
    English language
    sale 15% off
ISO
ISO 5725-5:2025(Main)
Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method

This document describes the use of robust methods for analysing the results of precision experiments without using outlier tests to exclude data from the calculations, and in particular, the detailed use of several such methods. The robust methods described in this document allow the data to be analysed in such a way that it is not required to make decisions about outliers that affect the results of the calculations.

  • Standard
    38 pages
    English language
    sale 15% off
  • Standard
    39 pages
    French language
    sale 15% off
  • Standard
    39 pages
    French language
    sale 15% off
ISO
ISO 11843-7:2025(Main)
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise

This document specifies the practical use of the fundamental concepts in ISO 11843 in case of the background noise predominance in instrumental analysis. This document specifies basic methods to — extract the stochastic properties of the background noise, — use the stochastic properties to estimate the SD or CV of the response variable, and — calculate the minimum detectable value based on the SD or CV obtained above. The methods described in this document are useful for checking the detection of a certain substance by various types of measurement equipment in which the background noise of the instrumental output predominates over the other sources of measurement uncertainty. Feasible choices are visible and ultraviolet absorption spectrometry, atomic absorption spectrometry, atomic fluorescence spectrometry, luminescence spectrometry, liquid chromatography and gas chromatography.

  • Standard
    16 pages
    English language
    sale 15% off
ISO
ISO 5725-1:2023(Main)
Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
SIST ISO 5725-1:2024

This document — introduces conditions, constraints and resources necessary to evaluate a measurement method or a result; — defines an organizational scheme for the acquisition of trueness and precision data by study; — provides the necessary definitions, statistical model and principles for ISO 5725 (all parts). — is not applicable to proficiency testing or production of the reference item that has their own standards (ISO 13528, respectively and ISO Guide 35). This document is concerned exclusively with measurement methods which yield results on a continuous scale and give a single value as the test result, although this single value may be the outcome of a calculation from a set of observations. It defines values which describe, in quantitative terms, the ability of a measurement method to give a true result (trueness) or to replicate a given result (precision). Thus, there is an implication that exactly the identical item is being measured, in exactly the same way, and that the measurement process is under control. This document may be applied to a very wide range of test items, including gas, liquids, powders and solid objects, manufactured or naturally occurring, provided that due consideration is given to any heterogeneity of the test item. This document does not include methods of calculation that are described in the other parts.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    19 pages
    English language
    sale 15% off
  • Standard
    20 pages
    French language
    sale 15% off
ISO
ISO 5725-3:2023(Main)
Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate precision and alternative designs for collaborative studies
SIST ISO 5725-3:2024

This document provides a) a discussion of alternative experimental designs for the determination of trueness and precision measures including reproducibility, repeatability and selected measures of intermediate precision of a standard measurement method, including a review of the circumstances in which their use is necessary or beneficial, and guidance as to the interpretation and application of the resulting estimates, and b) worked examples including specific designs and computations. Each of the alternative designs discussed in this document is intended to address one (or several) of the following issues: a) a discussion of the implications of the definitions of intermediate precision measures; b) a guidance on the interpretation and application of the estimates of intermediate precision measures in practical situations; c) determining reproducibility, repeatability and selected measures of intermediate precision; d) improved determination of reproducibility and other measures of precision; e) improving the estimate of the sample mean; f) determining the range of in-house repeatability standard deviations; g) determining other precision components such as operator variability; h) determining the level of reliability of precision estimates; i) reducing the minimum number of participating laboratories by optimizing the reliability of precision estimates; j) avoiding distorted estimations of repeatability (split-level designs); k) avoiding distorted estimations of reproducibility (taking the heterogeneity of the material into consideration). Often, the performance of the method whose precision is being evaluated in a collaborative study will have previously been assessed in a single-laboratory validation study conducted by the laboratory which developed it. Relevant factors for the determination of intermediary precision will have been identified in this prior single-laboratory study.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    57 pages
    English language
    sale 15% off
ISO
ISO/TS 27878:2023(Main)
Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies

This document provides statistical techniques for the determination of the reproducibility of the level of detection for a) binary (qualitative) test methods for continuous measurands, e.g. the content of a chemical substance, and b) binary (qualitative) test methods for discrete measurands, e.g. the number of RNA copies in a sample. The reproducibility precision is determined according to ISO 5725 (all parts). Precision estimates are subject to random variability. Accordingly, it is important to determine the uncertainty associated with each estimate, and to understand the relationship between this uncertainty, the number of participants and the experimental design. This document thus provides not only a description of statistical tools for the calculation of the LOD reproducibility precision, but also for the standard error of the estimates.

  • Technical specification
    16 pages
    English language
    sale 15% off
ISO
ISO/TS 23471:2022(Main)
Experimental designs for evaluation of uncertainty — Use of factorial designs for determining uncertainty functions

This document specifies experimental procedures and statistical analysis for the determination of measurement uncertainty in situations where the following conditions are fulfilled: Condition 1: The level of the measurand is non-negative, e.g. concentration level of a contaminant in a sample. Condition 2: Measurement error consists of two independent components: for one of these components the relative standard deviation is constant (that is, the absolute deviation is proportional to the level of the measurand), whereas for the other component the absolute standard deviation is constant (that is, independent of the level of the measurand). Condition 3: Samples for different levels of the measurand can be made available; if the level of the measurand is the concentration of a chemical substance, samples could be obtained e.g. by fortifying (spiking) blank samples. Conditions 1 and 2 are met for most applications of instrumental chemical analyses. Condition 3 can be met for chemical analyses if blank samples are available. This document can also be used to determine precision data for a particular laboratory for different technicians, different environmental conditions, the same or similar test items, with the same level of the measurand, over a certain period of time.

  • Technical specification
    26 pages
    English language
    sale 15% off
  • Technical specification
    27 pages
    French language
    sale 15% off
ISO
ISO 5725-4:2020(Main)
Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
SIST ISO 5725-4:2020

1.1 This document — specifies basic methods for estimating the bias of a measurement method and the laboratory bias when a measurement method is applied; — provides a practical approach of a basic method for routine use in estimating the bias of measurement methods and laboratory bias; — provides a brief guidance to all personnel concerned with designing, performing or analysing the results of the measurements for estimating bias. 1.2 It is concerned exclusively with measurement methods which yield measurements on a continuous scale and give a single value as the measurement result, although the single value can be the outcome of a calculation from a set of observations. 1.3 This document applies when the measurement method has been standardized and all measurements are carried out according to that measurement method. NOTE In ISO/IEC Guide 99:2007(VIM), "measurement procedure" (2.6) is an analogous term related to the term "measurement method" used in this document. 1.4 This document applies only if an accepted reference value can be established to substitute the true value by using the value, for example: — of a suitable reference material; — of a suitable measurement standard; — referring to a suitable measurement method; — of a suitable prepared known sample. 1.5 This document applies only to the cases where it is sufficient to estimate bias on one property at a time. It is not applicable if the bias in the measurement of one property is affected by the level of any other property (i.e. it does not consider interferences by any influencing quantity). Comparison of the trueness of two-measurement methods is considered in ISO 5725-6.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 5725-2:2019(Main)
Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
SIST ISO 5725-2:2020

1.1 This document — amplifies the general principles for designing experiments for the numerical estimation of the precision of measurement methods by means of a collaborative interlaboratory experiment; — provides a detailed practical description of the basic method for routine use in estimating the precision of measurement methods; — provides guidance to all personnel concerned with designing, performing or analysing the results of the tests for estimating precision. NOTE Modifications to this basic method for particular purposes are given in other parts of ISO 5725. 1.2 It is concerned exclusively with measurement methods which yield measurements on a continuous scale and give a single value as the test result, although this single value can be the outcome of a calculation from a set of observations. 1.3 It assumes that in the design and performance of the precision experiment, all the principles as laid down in ISO 5725-1 are observed. The basic method uses the same number of test results in each laboratory, with each laboratory analysing the same levels of test sample; i.e. a balanced uniform-level experiment. The basic method applies to procedures that have been standardized and are in regular use in a number of laboratories. 1.4 The statistical model of ISO 5725-1:1994, Clause 5, is accepted as a suitable basis for the interpretation and analysis of the test results, the distribution of which is approximately normal. 1.5 The basic method, as described in this document, (usually) estimates the precision of a measurement method: a) when it is required to determine the repeatability and reproducibility standard deviations as defined in ISO 5725-1; b) when the materials to be used are homogeneous, or when the effects of heterogeneity can be included in the precision values; and c) when the use of a balanced uniform-level layout is acceptable. 1.6 The same approach can be used to make a preliminary estimate of precision for measurement methods which have not reached standardization or are not in routine use.

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 11843-7:2018(Main)
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise

Background noise exists ubiquitously in analytical instruments, whether or not a sample is applied to the instrument. This document is concerned with mathematical methodologies for estimating the minimum detectable value in case that the most predominant source of measurement uncertainty is background noise. The minimum detectable value can directly and mathematically be derived from the stochastic characteristics of the background noise. This document specifies basic methods to — extract the stochastic properties of the background noise, — use the stochastic properties to estimate the standard deviation (SD) or coefficient of variation (CV) of the response variable, and — calculate the minimum detectable value based on the SD or CV obtained above. The methods described in this document are useful for checking the detection of a certain substance by various types of measurement equipment in which the background noise of the instrumental output predominates over the other sources of measurement uncertainty. Feasible choices are visible and ultraviolet absorption spectrometry, atomic absorption spectrometry, atomic fluorescence spectrometry, luminescence spectrometry, liquid chromatography and gas chromatography.

  • Standard
    18 pages
    English language
    sale 15% off