ISO 6360-4:2004
(Main)Dentistry — Number coding system for rotary instruments — Part 4: Specific characteristics of diamond instruments
Dentistry — Number coding system for rotary instruments — Part 4: Specific characteristics of diamond instruments
ISO 6360-4:2004 specifies the code numbers for specific characteristics of rotary diamond instruments and diamond-coated discs for use in dentistry. This three-digit number forms the fourth group of three digits in the 15-digit overall number, the principles of which are explained in ISO 6360-1 and ISO 6360-2. ISO 6360-4:2004 also gives a three-digit number which in addition to the 15-digit code number may be used to provide additional information for diamond instruments and diamond-coated discs, at the discretion of the manufacturer. NOTE In addition to terms for rotary instruments and accessories used in two of the three official ISO languages (English, French and Russian), ISO 6360-4:2004 gives the equivalent terms in the German language; these are published under the responsibility of the member body for Germany (DIN). However, only the terms given in the official languages can be considered as ISO terms.
Art dentaire — Système de codification numérique pour instruments rotatifs — Partie 4: Caractéristiques spécifiques des instruments diamantés
L'ISO 6360-4:2004 spécifie les codes correspondant à des caractéristiques spécifiques des instruments et disques diamantés. Ce nombre à trois chiffres forme le quatrième groupe de trois chiffres du code à 15 chiffres, dont les principes sont expliqués dans l'ISO 6360-1 et l'ISO 6360-2. L'ISO 6360-4:2004 donne en plus un nombre à trois chiffres qui peut être ajouté à la codification en 15 chiffres pour les instruments diamantés et les disques diamantés, à la discrétion du fabricant.
General Information
- Status
- Published
- Publication Date
- 15-Jun-2004
- Technical Committee
- ISO/TC 106/SC 4 - Dental instruments
- Drafting Committee
- ISO/TC 106/SC 4 - Dental instruments
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 01-Jul-2024
- Completion Date
- 14-Feb-2026
Relations
- Effective Date
- 12-Feb-2026
- Effective Date
- 28-Feb-2023
Overview
ISO 6360-4:2004 is an international standard developed by the International Organization for Standardization (ISO) that specifies a number coding system for rotary diamond instruments and diamond-coated discs used in dentistry. This part of the ISO 6360 series focuses on detailing the specific characteristics of diamond instruments, providing a structured 15-digit code for easy identification and classification. The code aids manufacturers, dental professionals, and the dental trade in standardizing descriptions of these rotary instruments, facilitating clear communication and product specification across the industry.
Key Topics
- Number Coding System: ISO 6360-4:2004 defines a three-digit code representing specific characteristics of rotary diamond instruments and diamond-coated discs. This code forms the fourth group of three digits within a comprehensive 15-digit identifier.
- Length and Thickness: The standard specifies how to encode the length of the working part of diamond instruments in increments of 0.1 mm, and the thickness of diamond-coated discs in increments of 0.01 mm.
- Nominal Diameter: Locations 13 to 15 in the code specify the nominal diameter of the instrument’s working part or the external diameter of diamond-coated discs, adhering to ISO 2157.
- Optional Coding: An optional three-digit segment (positions 16 to 18) can provide additional manufacturer-specific information about the angle of tapered diamond instruments or the width of diamond coatings on discs.
- Structured Format: ISO 6360-4 complements other parts of the ISO 6360 series, such as ISO 6360-1 for general characteristics and ISO 6360-2 for shapes, ensuring a unified and systematic approach to rotary instrument coding.
Applications
- Dental Instrument Manufacturing: Enables manufacturers to encode product details such as working length, thickness, diameter, and optional characteristics into a universally recognized numbering system.
- Product Cataloging: Dental suppliers and manufacturers can use the ISO 6360-4 coding to create standardized, clear product catalogs that facilitate easy identification by purchasers and practitioners.
- Quality Control and Traceability: The standard coding system helps in quality assurance, inventory management, and traceability of diamond rotary instruments throughout the supply chain.
- Regulatory Compliance: Using ISO 6360-4 supports compliance with international regulations by adopting standardized terminology and coding methodology.
- Custom Instrumentation: Manufacturers can assign optional codes for unique instrument features, assisting dental professionals in selecting the perfect instrument for specialized treatments.
Related Standards
ISO 6360-1: Dentistry - Number coding system for rotary instruments - Part 1: General characteristics
Establishes the foundational structure for the 15-digit coding system used in all parts of ISO 6360.ISO 6360-2: Dentistry - Number coding system for rotary instruments - Part 2: Shapes
Specifies the code numbers related to various shapes of dental rotary instruments.ISO 2157: Dental rotary instruments - Nominal diameters and designation code number
Defines standards for nominal diameters that are referenced within ISO 6360-4 for diamond instruments’ working parts and discs.ISO 6360-3, ISO 6360-6, ISO 6360-7
Cover additional specific characteristics of burs, cutters, abrasive instruments, mandrels, and special instruments that complement diamond instrument classification.
ISO 6360-4:2004 provides a crucial framework for the dental industry by enabling precise classification and coding of rotary diamond instruments. This fosters consistency, enhances communication, and supports product innovation in dentistry through standardized instrument identification. Adopting this standard benefits manufacturers, clinicians, and regulators worldwide by simplifying the complex variety of diamond rotary instruments used in dental practice.
Buy Documents
ISO 6360-4:2004 - Dentistry -- Number coding system for rotary instruments
ISO 6360-4:2004 - Art dentaire -- Systeme de codification numérique pour instruments rotatifs
Get Certified
Connect with accredited certification bodies for this standard
BSI Group
BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.
TÜV Rheinland
TÜV Rheinland is a leading international provider of technical services.
TÜV SÜD
TÜV SÜD is a trusted partner of choice for safety, security and sustainability solutions.
Sponsored listings
Frequently Asked Questions
ISO 6360-4:2004 is a standard published by the International Organization for Standardization (ISO). Its full title is "Dentistry — Number coding system for rotary instruments — Part 4: Specific characteristics of diamond instruments". This standard covers: ISO 6360-4:2004 specifies the code numbers for specific characteristics of rotary diamond instruments and diamond-coated discs for use in dentistry. This three-digit number forms the fourth group of three digits in the 15-digit overall number, the principles of which are explained in ISO 6360-1 and ISO 6360-2. ISO 6360-4:2004 also gives a three-digit number which in addition to the 15-digit code number may be used to provide additional information for diamond instruments and diamond-coated discs, at the discretion of the manufacturer. NOTE In addition to terms for rotary instruments and accessories used in two of the three official ISO languages (English, French and Russian), ISO 6360-4:2004 gives the equivalent terms in the German language; these are published under the responsibility of the member body for Germany (DIN). However, only the terms given in the official languages can be considered as ISO terms.
ISO 6360-4:2004 specifies the code numbers for specific characteristics of rotary diamond instruments and diamond-coated discs for use in dentistry. This three-digit number forms the fourth group of three digits in the 15-digit overall number, the principles of which are explained in ISO 6360-1 and ISO 6360-2. ISO 6360-4:2004 also gives a three-digit number which in addition to the 15-digit code number may be used to provide additional information for diamond instruments and diamond-coated discs, at the discretion of the manufacturer. NOTE In addition to terms for rotary instruments and accessories used in two of the three official ISO languages (English, French and Russian), ISO 6360-4:2004 gives the equivalent terms in the German language; these are published under the responsibility of the member body for Germany (DIN). However, only the terms given in the official languages can be considered as ISO terms.
ISO 6360-4:2004 is classified under the following ICS (International Classification for Standards) categories: 11.060.25 - Dental instruments. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 6360-4:2004 has the following relationships with other standards: It is inter standard links to EN ISO 6360-4:2004, ISO/R 963:1969. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 6360-4:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 6360-4
First edition
2004-06-01
Dentistry — Number coding system for
rotary instruments —
Part 4:
Specific characteristics of diamond
instruments
Art dentaire — Système de codification numérique pour instruments
rotatifs —
Partie 4: Caractéristiques spécifiques des instruments diamantés
Reference number
©
ISO 2004
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
©
ii ISO 2004 – All rights reserved
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO6360-4 was prepared by Technical Committee ISO/TC106, Dentistry, Subcommittee SC4, Dental
instruments.
ISO 6360 consists of the following parts, under the general title Dentistry — Number coding system for rotary
instruments:
— Part 1: General characteristics
— Part 2: Shapes
— Part 3: Specific characteristics of burs and cutters
— Part 4: Specific characteristics of diamond instruments
— Part 6: Specific characteristics of abrasive instruments
— Part 7: Specific characteristics of mandrels and special instruments
©
ISO 2004 – All rights reserved iii
Introduction
This part of ISO 6360 is one of a series of International Standards relating to dental rotary instruments. A wide
variety of dental rotary instruments, including root-canal instruments, is manufactured throughout the world for
use by the dental profession.
ISO 6360 provides a general number coding system for all types of dental rotary instruments, including
accessories used in connection with these rotary instruments.
The benefits of this system for dentistry in its entirety will only be derived if the system is widely adopted;
manufacturers of dental instruments, as well as the dental trade, are therefore requested to refer to ISO 6360 in
their catalogues.
This part of ISO 6360 was prepared in response to a need by the dental trade and industry and the dental
profession for a universal system of classification and designation for these instruments. It establishes a
comprehensive number coding system suitable for all dental rotary instruments by use of a 15-digit code
number identifying general and specific characteristics of instruments or groups of instruments.
The first group of three digits identifies the materials used for the working part of instruments.
The second group of three digits identifies the shanks and handles used for instruments and the overall lengths
of instruments.
The third group of three digits identifies the shapes of instruments.
The fourth group of three digits identifies the specific characteristics for groups of instruments.
The fifth group of three digits identifies the nominal diameter of the working part of the instruments.
A sixth group of three digits may optionally be used for diamond instruments to identify further specific
characteristics (see ISO 6360-4).
The code numbers are generic code numbers. They do not provide exact product information. This information
is given in the respective product standards for dental rotary instruments.
For the application of the system and for the correct allocation of numbers or their identification, it is intended
that the user consult ISO 6360-1 and ISO 6360-2 for general information, and in addition one of the following
subsequent parts (ISO 6360-3 to ISO 6360-7) for further information on specific characteristics of instruments
or groups of instruments.
For the allocation of new numbers complying with ISO 6360, an application supported by a description and a
drawing should be sent to the secretariat of ISO/TC 106/SC 4, Dental instruments, which keeps updated
records of all numbers currently allocated. An international group of experts
...
NORME ISO
INTERNATIONALE 6360-4
Première édition
2004-06-01
Art dentaire — Système de codification
numérique pour instruments rotatifs —
Partie 4:
Caractéristiques spécifiques des
instruments diamantés
Dentistry — Number coding system for rotary instruments —
Part 4: Specific characteristics of diamond instruments
Numéro de référence
©
ISO 2004
PDF — Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info du
fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir l'exploitation
de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation, veuillez en informer
le Secrétariat central à l'adresse donnée ci-dessous.
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
©
ii ISO 2004 – Tous droits réservés
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec la
Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de droits
de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne pas avoir
identifié de tels droits de propriété et averti de leur existence.
L'ISO 6360-4 a été élaborée par le comité technique ISO/TC 106, Art dentaire, sous-comité SC 4, Instruments
dentaires.
L'ISO 6360 comprend les parties suivantes, présentées sous le titre général Art dentaire — Système de
codification numérique pour instruments rotatifs:
— Partie 1: Caractéristiques générales
— Partie 2: Formes de réalisation
— Partie 3: Caractéristiques spécifiques des fraises et instruments de coupe
— Partie 4: Caractéristiques spécifiques des instruments diamantés
— Partie 6: Caractéristiques spécifiques des instruments abrasifs
— Partie 7: Caractéristiques spécifiques des mandrins et instruments spéciaux
©
ISO 2004 – Tous droits réservés iii
Introduction
La présente partie de l'ISO 6360 fait partie d'une série de normes relatives aux instruments rotatifs dentaires.
Toutes sortes d'instruments rotatifs dentaires, y compris les instruments pour canaux radiculaires, sont
fabriqués dans des pays du monde entier à l'usage de la profession dentaire.
L'ISO 6360 fournit un système général de codification numérique pour tous les types d'instruments rotatifs
dentaires, y compris les accessoires utilisés avec ces instruments.
Ce système ne sera bénéfique pour l'art dentaire dans son ensemble que s'il est largement adopté. En
conséquence, les fabricants et fournisseurs d'instruments dentaires sont invités à faire référence à l'ISO 6360
dans leurs catalogues.
La présente partie de l'ISO 6360 a été élaborée pour répondre au besoin des commerçants, industriels et
praticiens dentaires de disposer d'un système universel de classification et de désignation de ces instruments.
Elle établit un système complet de codification numérique à 15 chiffres de tous les instruments rotatifs
dentaires, identifiant les caractéristiques générales et spécifiques des instruments ou groupes d'instruments.
Le premier groupe de trois chiffres identifie les matériaux utilisés pour la partie active des instruments.
Le deuxième groupe de trois chiffres identifie les queues et poignées utilisées pour les instruments et les
longueurs totales des instruments.
Le troisième groupe de trois chiffres identifie les formes d'instruments.
Le quatrième groupe de trois chiffres identifie les caractéristiques spécifiques de groupes d'instruments.
Le cinquième groupe de trois chiffres identifie le diamètre nominal de la partie active des instruments.
Un sixième groupe de trois chiffres peut éventuellement être utilisé pour les instruments diamantés, afin
d'identifier d'autres caractéristiques spécifiques (voir l’ISO 6360-4).
Les codes sont des codes génériques. Ils ne donnent pas d'information précise sur le produit. Ces informations
figurent dans les normes de produit sur les instruments rotatifs dentaires.
Pour l'application du système et la codification correcte ou l'identification des codes, il est prévu que l'utilisateur
consulte l'ISO 6360-1 et l'ISO 6360-2 pour toute information d'ordre général, ainsi que l'une ou l'autre des
parties suivantes (ISO6360-3 à ISO6360-7) pour toute information complémentaire concernant des
caractéristiques spécifiques des instruments et groupes d'instruments.
Pour toute nouvelle codification conformément à l'ISO 6360, il convient d'envoyer une demande accompagnée
d'une description et d'un dessin au secrétariat de l'ISO/TC 106
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...