prEN IEC 62973-3:2025

SLOVENSKI STANDARD
01-december-2025
Železniške naprave - Vozna sredstva - Baterije za pomožne močnostne napajalne
sisteme - 3. del: Svinčeve kislinske baterije
Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part
3: Lead acid batteries
Bahnanwendungen - Fahrzeuge - Batterien für Bordnetzversorgungssysteme – Teil 3:
Bleibatterien
Applications ferroviaires - Matériel roulant - Batteries pour systèmes d'alimentation
auxiliaire - Partie 3: Batteries au plomb
Ta slovenski standard je istoveten z: prEN IEC 62973-3:2025
ICS:
29.220.20 Kislinski sekundarni členi in Acid secondary cells and
baterije batteries
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD DRAFT
prEN IEC 62973-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2025
ICS 29.220.20; 45.040 -
English Version
Railway applications - Rolling stock - Batteries for auxiliary
power supply systems - Part 3: Lead acid batteries
(IEC 62973-3:2024)
Applications ferroviaires - Matériel roulant - Batteries pour Bahnanwendungen - Fahrzeuge - Batterien für
systèmes d'alimentation auxiliaire - Partie 3: Batteries au Bordnetzversorgungssysteme - Teil 3: Bleibatterien
plomb (IEC 62973-3:2024)
(IEC 62973-3:2024)
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2026-01-02.

The text of this draft consists of the text of IEC 62973-3:2024.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 81175 Ref. No. prEN IEC 62973-3:2025 E

European foreword
This document (prEN IEC 62973-3:2025) consists of the text of IEC 62973-3:2024 prepared by IEC/TC 9
"Electrical equipment and systems for railways".
This document is currently submitted to the Enquiry.
The following dates are proposed:
• latest date by which the existence of this document has (doa) dav+ 6 months
to be announced at national level
• latest date by which this document has to be (dop) dav+ 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards conflicting (dow) dav+ 36 months
with this document have to be withdrawn (to be confirmed or
modified when voting)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60896-21 2004 Stationary lead-acid batteries - Part 21: EN 60896-21 2004
Valve regulated types - Methods of test
IEC 60896-22 2004 Stationary lead-acid batteries - Part 22: EN 60896-22 2004
Valve regulated types - Requirements
IEC 61373 2010 Railway applications - Rolling stock EN 61373 2010
equipment - Shock and vibration tests
IEC/TS 61430 - Secondary cells and batteries - Test - -
methods for checking the performance of
devices designed for reducing explosion
hazards - Lead-acid starter batteries
IEC/TR 61431 2020 Guidelines for the use of monitor systems - -
for lead-acid traction batteries
IEC 62485-2 2010 Safety requirements for secondary EN IEC 62485-2 2018
batteries and battery installations - Part 2:
Stationary batteries
IEC 62498-1 2010 Railway applications - Environmental - -
conditions for equipment - Part 1:
Equipment on board rolling stock
IEC 62973-1 2018 Railway applications - Rolling stock - EN IEC 62973-1 —
Batteries for auxiliary power supply
systems - Part 1: General Requirements
ISO/IEC 17025 - General requirements for the competence EN ISO/IEC 17025 -
of testing and calibration laboratories

Under preparation. Stage at the time of publication: prEN IEC 62973-1:2025.
IEC 62973-3 ®
Edition 1.0 2024-04
INTERNATIONAL
STANDARD
Railway applications – Rolling stock – Batteries for auxiliary power supply
systems –
Part 3: Lead acid batteries
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.220.20; 45.060.01 ISBN 978-2-8322-8567-1
– 2 – IEC 62973-3:2024 © IEC 2024
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 8
3.1 Terms and definitions . 8
3.2 Abbreviated terms . 9
4 General requirements . 9
4.1 Definitions of components of a battery system . 9
4.2 Description of lead acid battery types . 10
4.2.1 General . 10
4.2.2 Lead acid batteries with valve-regulated cell design and immobilized
electrolyte . 11
4.3 Environmental conditions . 11
4.4 System requirements . 12
4.4.1 System voltage . 12
4.4.2 Charging requirements . 13
4.4.3 Discharging performances . 16
4.4.4 Charge retention(self-discharge) . 17
4.4.5 Requirements for battery sizing . 17
4.5 Safety and protection requirements . 18
4.5.1 General . 18
4.5.2 Deep discharge of batteries . 18
4.5.3 Temperature compensation during charging . 19
4.6 Fire protection . 19
4.7 Maintenance . 19
4.8 Charging characteristics . 19
5 Optional components of a battery system . 20
5.1 General . 20
5.2 Battery information system . 20
5.3 Battery heater . 20
5.4 Thermostat or cut-off switch . 20
6 Mechanical design of battery system . 21
6.1 General . 21
6.2 Interface mechanism . 21
6.3 Shock and vibration . 21
6.4 Ventilation of battery box . 21
7 Electrical interface . 22
7.1 General . 22
7.2 External electrical connections interface . 22
8 Markings. 22
8.1 Safety signs . 22
8.1.1 Outside the box . 22
8.1.2 Tray, crate or other places inside the box . 22
8.1.3 Cells and monoblocs . 23
8.2 Nameplate . 23
8.2.1 Battery box . 23

IEC 62973-3:2024 © IEC 2024 – 3 –
8.2.2 Nameplates on tray, crate or other nameplates inside the box . 23
9 Storage and transportation conditions . 23
9.1 Transportation . 23
9.2 Storage . 23
10 Testing . 24
10.1 General . 24
10.2 Type test . 24
10.2.1 General . 24
10.2.2 Tests for cells and monoblocs. 24
10.2.3 Dielectric test . 25
10.2.4 Load profile test . 25
10.2.5 Shock and vibration test . 25
10.3 Routine test . 26
10.3.1 General . 26
10.3.2 Visual checks . 26
10.3.3 Dielectric test . 26
10.3.4 Cell and monobloc voltages .
...