EN 60825-1:2014/A11:2021/AC:2022-03
(Corrigendum)Safety of laser products - Part 1: Equipment classification and requirements
Safety of laser products - Part 1: Equipment classification and requirements
CCMC origin
Sicherheit von Lasereinrichtungen - Teil 1: Klassifizierung von Anlagen und Anforderungen
Sécurité des appareils à laser - Partie 1: Classification des matériels et exigences
Varnost laserskih izdelkov - 1. del: Klasifikacija opreme in zahteve - Popravek AC
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2022
Varnost laserskih izdelkov - 1. del: Klasifikacija opreme in zahteve - Popravek AC
Safety of laser products - Part 1: Equipment classification and requirements
Sicherheit von Lasereinrichtungen - Teil 1: Klassifizierung von Anlagen und
Anforderungen
Sécurité des appareils à laser - Partie 1: Classification des matériels et exigences
Ta slovenski standard je istoveten z: EN 60825-1:2014/A11:2021/AC:2022-03
ICS:
13.280 Varstvo pred sevanjem Radiation protection
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN 60825- en
1:2014/A11:2021/AC:2022
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 60825-1:2014/A11:2021/AC:2022
Corrigendum to EN 60825-1:2014/A11:2021
Engl
...
This May Also Interest You
Amendment of EN 60825-1 in relation to European regulation (LVD2)
- Amendment17 pagesEnglish languagesale 10% offe-Library read for×1 day
- 18-Feb-2021
- 13.110
- 31.260
- 2014/35/EU
- M/511
- CLC/TC 76
2019-09-26: not to be offered for LVD citation, DOW extension
- Corrigendum1 pageEnglish languagesale 10% offe-Library read for×1 day
IEC 60825-1:2014 is applicable to safety of laser products emitting laser radiation in the wavelength range 180 nm to 1 mm. A laser product may consist of a single laser with or without a separate power supply or may incorporate one or more lasers in a complex optical, electrical, or mechanical system. Typically, laser products are used for demonstration of physical and optical phenomena, materials processing, data reading and storage, transmission and display of information, etc. Such systems have found use in industry, business, entertainment, research, education, medicine and consumer products. Laser products that are sold to other manufacturers for use as components of any system for subsequent sale are not subject to IEC 60825-1, since the final product will itself be subject to this standard. Laser products that are sold by or for manufacturers of end products for use as repair parts for the end products are also not subject to IEC 60825-1. However, if the laser system within the laser product is operable when removed from the end product, the requirements of this Part 1 apply to the removable laser system. The objectives of this part of IEC 60825 are: - to introduce a system of classification of lasers and laser products emitting radiation in the wavelength range 180 nm to 1 mm according to their degree of optical radiation hazard in order to aid hazard evaluation and to aid the determination of user control measures; - to establish requirements for the manufacturer to supply information so that proper precautions can be adopted; - to ensure, through labels and instructions, adequate warning to individuals of hazards associated with accessible radiation from laser products; and - to reduce the possibility of injury by minimizing unnecessary accessible radiation and to give improved control of the laser radiation hazards through protective features. This edition includes the following significant technical changes with respect to the previous edition: - a new class, Class 1C, was introduced; - the measurement condition 2 ("eye loupe" condition) was removed; - a classification of the emission of laser products below a certain radiance level that are intended to be used as replacement for conventional light sources can, as an option, be based on the IEC 62471 series; - and the accessible emission limits (AELs) for Class 1, 1M, 2, 2M and 3R of pulsed sources, particularly of pulsed extended sources, were updated to reflect the latest revision of the ICNIRP guidelines on exposure limits (accepted for publication in Health Physics Journal 2013, see also www.icnirp.org).
- Standard108 pagesEnglish languagesale 10% offe-Library read for×1 day
- Standard117 pagesEnglish languagesale 10% offe-Library read for×1 day
Amendment of EN 60825-1 in relation to European regulation (LVD2)
- Amendment17 pagesEnglish languagesale 10% offe-Library read for×1 day
- 18-Feb-2021
- 13.110
- 31.260
- 2014/35/EU
- M/511
- CLC/TC 76
This part of IEC 61496 specifies additional requirements for the design, construction and testing of electro-sensitive protective equipment (ESPE) designed specifically to detect persons or parts of persons as part of a safety-related system, employing active optoelectronic protective devices responsive to diffuse reflection (AOPDDRs) for the sensing function. Special attention is directed to requirements which ensure that an appropriate safety-related performance is achieved. An ESPEcan include optional safety-related functions, the requirements for which are given both in Annex A of this document and in Annex A of IEC 61496-1:2012. This document does not specify the dimensions or configurations of the detection zone and its disposition in relation to hazardous parts for any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. AOPDDRs are devices that have either - one or more detection zone(s) specified in two dimensions (AOPDDR-2D), or - one or more detection zone(s) specified in three dimensions (AOPDDR-3D) wherein radiation in the near infrared range is emitted by an emitting element(s). When the emitted radiation impinges on an object (for example, a person or part of a person), a portion of the emitted radiation is reflected to a receiving element(s) by diffuse reflection. This reflection is used to determine the position of the object. Opto-electronic devices that perform only a single one-dimensional spot-like distance measurement, for example, optical proximity switches, are not covered by this document. This document does not address those aspects required for complex classification or differentiation of the object detected. This document does not address requirements and tests for outdoor application. Excluded from this document are AOPDDRs employing radiation with the peak of wavelength outside the range 820 nm to 950 nm, and those employing radiation other than that generated by the AOPDDR itself. For sensing devices that employ radiation of wavelengths outside this range, this document can be used as a guide. This document is relevant for AOPDDRs having a minimum detectable object size in the range from 30 mm to 200 mm. This document can be relevant to applications other than those for the protection of persons, for example, for the protection of machinery or products from mechanical damage. In those applications, different requirements can be appropriate, for example when the materials that have to be recognized by the sensing function have different properties from those of persons and their clothing. This document does not deal with electromagnetic compatibility (EMC) emission requirements.
- Standard93 pagesEnglish languagesale 10% offe-Library read for×1 day
- 14-Feb-2019
- 10-Jan-2022
- 13.110
- 31.260
- CLC/TC 44X
2019-09-26: not to be offered for LVD citation, DOW extension
- Corrigendum1 pageEnglish languagesale 10% offe-Library read for×1 day
IEC 60825-1:2014 is applicable to safety of laser products emitting laser radiation in the wavelength range 180 nm to 1 mm. A laser product may consist of a single laser with or without a separate power supply or may incorporate one or more lasers in a complex optical, electrical, or mechanical system. Typically, laser products are used for demonstration of physical and optical phenomena, materials processing, data reading and storage, transmission and display of information, etc. Such systems have found use in industry, business, entertainment, research, education, medicine and consumer products. Laser products that are sold to other manufacturers for use as components of any system for subsequent sale are not subject to IEC 60825-1, since the final product will itself be subject to this standard. Laser products that are sold by or for manufacturers of end products for use as repair parts for the end products are also not subject to IEC 60825-1. However, if the laser system within the laser product is operable when removed from the end product, the requirements of this Part 1 apply to the removable laser system. The objectives of this part of IEC 60825 are: - to introduce a system of classification of lasers and laser products emitting radiation in the wavelength range 180 nm to 1 mm according to their degree of optical radiation hazard in order to aid hazard evaluation and to aid the determination of user control measures; - to establish requirements for the manufacturer to supply information so that proper precautions can be adopted; - to ensure, through labels and instructions, adequate warning to individuals of hazards associated with accessible radiation from laser products; and - to reduce the possibility of injury by minimizing unnecessary accessible radiation and to give improved control of the laser radiation hazards through protective features. This edition includes the following significant technical changes with respect to the previous edition: - a new class, Class 1C, was introduced; - the measurement condition 2 ("eye loupe" condition) was removed; - a classification of the emission of laser products below a certain radiance level that are intended to be used as replacement for conventional light sources can, as an option, be based on the IEC 62471 series; - and the accessible emission limits (AELs) for Class 1, 1M, 2, 2M and 3R of pulsed sources, particularly of pulsed extended sources, were updated to reflect the latest revision of the ICNIRP guidelines on exposure limits (accepted for publication in Health Physics Journal 2013, see also www.icnirp.org).
- Standard108 pagesEnglish languagesale 10% offe-Library read for×1 day
- Standard117 pagesEnglish languagesale 10% offe-Library read for×1 day
IEC 61496-3:2025 specifies additional requirements for the design, construction and testing of non‑contact electro-sensitive protective equipment (ESPE) designed specifically to detect persons or parts of persons as part of a safety-related system, employing active opto-electronic protective devices responsive to diffuse reflection (AOPDDRs) for the sensing function. Special attention is directed to requirements which ensure that an appropriate safety-related performance is achieved. An ESPE can include optional safety-related functions, the requirements for which are given both in Annex A of this document and in Annex A of IEC 61496‑1:2020. NOTE "Non-contact" means that physical contact is not required for sensing. This document does not specify the dimensions or configurations of the detection zone and its disposition in relation to hazardous parts for any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine. AOPDDRs are devices that have either - one or more detection zone(s) specified in two dimensions (AOPDDR-2D), or - one or more detection zone(s) specified in three dimensions (AOPDDR-3D) wherein radiation in the near infrared range is emitted by an emitting element(s). When the emitted radiation impinges on an object (for example, a person or part of a person), a portion of the emitted radiation is reflected to a receiving element(s) by diffuse reflection. This reflection is used to determine the position of the object. Opto-electronic devices that perform only a single one-dimensional spot-like distance measurement, for example, optical proximity switches, are not covered by this document. This document is limited to ESPE that do not require human intervention for detection. It is limited to ESPE that detect objects entering into or being present in a detection zone(s). This document does not address those aspects required for complex classification or differentiation of the object detected. This document does not address requirements and tests for outdoor application. Excluded from this document are AOPDDRs employing radiation with the peak of wavelength outside the range 820 nm to 1 100 nm, and those employing radiation other than that generated by the AOPDDR itself. For sensing devices that employ radiation of wavelengths outside this range, this document can be used as a guide. This document is relevant for AOPDDRs having a minimum detectable object size in the range from 30 mm to 200 mm. This document can be relevant to applications other than those for the protection of persons, for example, for the protection of machinery or products from mechanical damage. In those applications, different requirements can be appropriate, for example when the materials that are recognized by the sensing function have different properties from those of persons and their clothing. This document does not deal with electromagnetic compatibility (EMC) emission requirements. This fourth edition cancels and replaces the third edition published in 2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) some requirement clauses and test procedures have been adapted or removed because they have been consolidated in IEC 61496-1:2020 (e.g. 5.4.6.2 Light sources and Clause A.9); b) change of the minimum probability of detection and fault detection requirements for Type 2 AOPDDR;
- Draft85 pagesEnglish languagesale 10% offe-Library read for×1 day
- 02-Oct-2025
- 13.110
- 31.260
- CLC/TC 44X
IEC 60947-5-7:2024 states the requirements for proximity devices that correspond to the scope of IEC 60947-5-2:2019 with analog output (PDAO) and/or a digital output to transmit a corresponding digital value representing the detected sensing input. These devices can provide additional parameters. This second edition cancels and replaces the first edition published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) New structure; b) Update and expansion of definitions on analog output properties; c) Expanded performance requirements on analog output; d) Update and new normative references; e) Update of EMC requirements; f) Harmonization with IEC 62828 series; g) Harmonization with IEC 62683 and IEC 61987 definitions; h) Harmonization with IEC 61131-2 requirements; i) Update of the Annex A (former Annex G), Example of the determination of the conformity; j) New Annex B, Overview tests and influence quantities; k) New Annex C, Additional requirements for proximity switches with analog output incorporating a built-in communication interface complying with IEC 61131-9; l) New Annex D, Main characteristics for proximity devices with analog output.
- Draft45 pagesEnglish languagesale 10% offe-Library read for×1 day
IEC 60947-4-1:2023 is applicable to the following equipment: - electromechanical contactors and starters including motor protective switching devices (MPSD and IMPSD); - actuators of contactor relays; - contacts dedicated exclusively to the coil circuit of the contactor or the contactor relay; - dedicated accessories (e.g. dedicated wiring, dedicated latch accessory); intended to be connected to distribution circuits, motors circuits and other load circuits, the rated voltage of which does not exceed 1 000 V AC or 1 500 V DC. This fifth edition cancels and replaces the fourth edition published in 2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) objective in the scope; b) instantaneous only motor protective switching device IMPSD (3.5.33); c) kinds of equipment (5.2.1); d) methods of overload protection of motors (5.2.6); e) adoption of the AC-7d from IEC 61095:2023 (in 5.4.2); f) separately mounted overload relay of a starter (in 5.7.3 b)); g) starter and contactor suitable for use downstream to basic drive module (6.1.2 w)); h) reference to IEC TS 63058 for environmental aspects (in 6.4); i) wiring subject to movement (in 8.1.3); j) use of voltage transient limiting device (8.1.18); k) accessible parts subject to temperature limits (in 8.2.2.3); l) reference to Annex X of IEC 60947-1:2020 for the co-ordination of MPSD with SCPD (8.2.5.4); m) reference to IEC TR 63216 with different EMC environments (8.3.1); n) reference to IEC TR 63201 for the embedded software design (8.4); o) reference to IEC TS 63208 for cybersecurity aspects (8.5); p) update and completion of the measurement method of the power consumption of the electromagnet (9.3.3.2.1.2); q) update of Annex C including rational about AC-3e; r) determination of the critical load current for photovoltaic applications (M.8.7).
- Draft179 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.