EN 16510-1:2018
(Main)Residential solid fuel burning appliances - Part 1: General requirements and test methods
General Information
- Abstract
This European Standard is applicable to residential solid fuel burning appliances.
This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of appliances fired by solid fuel (hereafter referred to as appliance(s)) and provides instructions for them. Furthermore, it also gives provisions for the evaluation of conformity i.e. initial type testing (ITT) and factory production control (FPC) and marking of these appliances.
This European Standard also covers CO, NOx, OGC and particulate matter (PM / PME - see Annex F) emission test methods, however this European Standard does not contain any values for the limit on these emissions.
Appliances receiving combustion air through ductwork from outside the external envelope, which is not air tight, are not considered roomsealed.This European Standard is not applicable to appliances with boiler parts in contact with fire or flue gases other than when the boiler parts are manufactured from steel or cast iron.
This European Standard is not applicable to appliances with a boiler intended for water systems having
- water temperatures above 110 °C and/or an operating pressure of more than 3 bar;
- direct contact with sanitary hot water.
This European Standard does not cover appliances to be operated with ventilating systems which are intended to operate with pressure below - 15 Pa in the room of installation of the appliance in relation to the outside atmosphere.
This European Standard does not cover appliances intended to carry the load of a chimney.
- Status
- Withdrawn
- Publication Date
- 24-Jul-2018
- Withdrawal Date
- 22-Sep-2026
- Technical Committee
- CEN/TC 295 - Residential solid fuel burning appliances
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 21-Dec-2022
- Completion Date
- 23-Sep-2026
- Directive
- Harmonized Standard305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Not Harmonized89/106/EEC - Construction products
Relations
- Effective Date
- 01-Aug-2018
- Replaces
EN 12815:2001/AC:2003 - Residential cookers fired by solid fuel - Requirements and test methods - Effective Date
- 01-Aug-2018
- Effective Date
- 01-Aug-2018
- Effective Date
- 01-Aug-2018
- Replaces
EN 12815:2001/AC:2006 - Residential cookers fired by solid fuel - Requirements and test methods - Effective Date
- 01-Aug-2018
- Replaces
EN 13240:2001/A2:2004/AC:2007 - Roomheaters fired by solid fuel - Requirements and test methods - Effective Date
- 01-Aug-2018
- Effective Date
- 01-Aug-2018
- Replaces
EN 13240:2001/A2:2004/AC:2006 - Roomheaters fired by solid fuel - Requirements and test methods - Effective Date
- 01-Aug-2018
- Effective Date
- 01-Aug-2018
- Effective Date
- 01-Aug-2018
- Effective Date
- 01-Aug-2018
- Effective Date
- 01-Aug-2018
- Effective Date
- 01-Aug-2018
- Effective Date
- 01-Aug-2018
- Effective Date
- 01-Aug-2018
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 16510-1:2018 is a standard published by the European Committee for Standardization (CEN). Its full title is "Residential solid fuel burning appliances - Part 1: General requirements and test methods". This standard covers: This European Standard is applicable to residential solid fuel burning appliances. This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of appliances fired by solid fuel (hereafter referred to as appliance(s)) and provides instructions for them. Furthermore, it also gives provisions for the evaluation of conformity i.e. initial type testing (ITT) and factory production control (FPC) and marking of these appliances. This European Standard also covers CO, NOx, OGC and particulate matter (PM / PME - see Annex F) emission test methods, however this European Standard does not contain any values for the limit on these emissions. Appliances receiving combustion air through ductwork from outside the external envelope, which is not air tight, are not considered roomsealed.This European Standard is not applicable to appliances with boiler parts in contact with fire or flue gases other than when the boiler parts are manufactured from steel or cast iron. This European Standard is not applicable to appliances with a boiler intended for water systems having - water temperatures above 110 °C and/or an operating pressure of more than 3 bar; - direct contact with sanitary hot water. This European Standard does not cover appliances to be operated with ventilating systems which are intended to operate with pressure below - 15 Pa in the room of installation of the appliance in relation to the outside atmosphere. This European Standard does not cover appliances intended to carry the load of a chimney.
This European Standard is applicable to residential solid fuel burning appliances. This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of appliances fired by solid fuel (hereafter referred to as appliance(s)) and provides instructions for them. Furthermore, it also gives provisions for the evaluation of conformity i.e. initial type testing (ITT) and factory production control (FPC) and marking of these appliances. This European Standard also covers CO, NOx, OGC and particulate matter (PM / PME - see Annex F) emission test methods, however this European Standard does not contain any values for the limit on these emissions. Appliances receiving combustion air through ductwork from outside the external envelope, which is not air tight, are not considered roomsealed.This European Standard is not applicable to appliances with boiler parts in contact with fire or flue gases other than when the boiler parts are manufactured from steel or cast iron. This European Standard is not applicable to appliances with a boiler intended for water systems having - water temperatures above 110 °C and/or an operating pressure of more than 3 bar; - direct contact with sanitary hot water. This European Standard does not cover appliances to be operated with ventilating systems which are intended to operate with pressure below - 15 Pa in the room of installation of the appliance in relation to the outside atmosphere. This European Standard does not cover appliances intended to carry the load of a chimney.
EN 16510-1:2018 is classified under the following ICS (International Classification for Standards) categories: 01.040.91 - Construction materials and building (Vocabularies); 91.140.10 - Central heating systems; 97.040.20 - Cooking ranges, working tables, ovens and similar appliances; 97.100.30 - Solid fuel heaters. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 16510-1:2018 has the following relationships with other standards: It is inter standard links to EN 13229:2001/AC:2006, EN 12815:2001/AC:2003, EN 13229:2001/AC:2003, EN 12815:2001/A1:2004/AC:2007, EN 12815:2001/AC:2006, EN 13240:2001/A2:2004/AC:2007, EN 12815:2001/A1:2004/AC:2006, EN 13240:2001/A2:2004/AC:2006, EN 13229:2001/A2:2004, EN 12809:2001, EN 13229:2001/A2:2004/AC:2007, EN 13240:2001/AC:2006, EN 13229:2001/A1:2003, EN 13240:2001/A2:2004, EN 13229:2001/A2:2004/AC:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 16510-1:2018 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/129. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 16510-1:2018 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stanovanjske grelne naprave na trdna goriva - 1. del: Splošne zahteve in preskusne metodeHäusliche Heizgeräte für feste Brennstoffe - Teil 1: Allgemeine Anforderungen und PrüfverfahrenEquipement de chauffage domestique - Partie 1 : Exigences et méthodes d'essai généralesResidential solid fuel burning appliances - Part 1: General requirements and test methods97.100.30Grelniki na trdo gorivoSolid fuel heatersICS:Ta slovenski standard je istoveten z:EN 16510-1:2018SIST EN 16510-1:2018en,fr,de01-september-2018SIST EN 16510-1:2018SLOVENSKI
STANDARDSIST EN 13229:2003SIST EN 13240:2003SIST EN 12809:2003SIST EN 12815:20031DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16510-1
July
t r s z ICS
r sä r v rä { sâ
{ sä s v rä s râ
{ yä r v rä t râ
{ yä s r rä u r Supersedes EN
s t z r {ã t r r sá EN
s t z s wã t r r sá EN
s u t t {ã t r r sá EN
s u t v rã t r r sEnglish Version
Residential solid fuel burning appliances æ Part
sã General requirements and test methods Appareils de chauffage domestiques à combustion solide æ Partie
sã Exigences générales et méthodes d 5essai
Häusliche Feuerstätten für feste Brennstoffe æ Teil
sã Allgemeine Anforderungen und Prüfverfahren This European Standard was approved by CEN on
t v March
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x w s ræ sã t r s z ESIST EN 16510-1:2018
Test methods . 59 A.1 Test environment . 59 A.1.1 Ambient room temperature . 59 A.1.2 Cross-draught . 59 A.1.3 External sources . 59 A.2 Test assembly . 59 A.2.1 General. 59 A.2.2 Trihedron . 60 A.2.3 Measurement section . 61 SIST EN 16510-1:2018
Test fuels and recommended fuels . 102 B.1 General . 102 B.2 Test fuel . 102 B.2.1 Selection of test fuel . 102 B.2.2 Storage, preparation and analysis . 102 B.3 Tests for recommended fuels . 102 B.3.1 Basis of testing . 102 B.3.2 Test methods and criteria . 103 Annex C (informative)
Arrangement for measuring the leakage rate . 109 Annex D (normative)
Measuring procedure for nitrogen oxides (NOx) . 110 D.1 General procedure . 110 D.2 Measuring principle of analysers . 110 D.2.1 General description . 110 D.2.2 Chemiluminescense method . 111 D.2.3 Non-dispersive infrared (NDIR) method . 112 D.2.4 Other methods . 113 SIST EN 16510-1:2018
Measuring procedure for organic gaseous carbon (OGC) . 117 E.1 General procedure . 117 E.2 Description of measuring equipment . 117 E.2.1 General. 117 E.2.2 Sampling probe and filter . 117 E.2.3 Sampling line . 118 E.2.4 Sample pump . 118 E.2.5 Secondary filter . 118 E.2.6 Analyser (FID) . 118 E.2.7 FID fuel . 118 E.2.8 FID combustion air . 118 E.3 Setting of measurement system . 118 E.3.1 General. 118 E.3.2 Preliminary zero and span check and adjustments . 119 E.4 Calculation of OGC. 120 E.4.1 General. 120 E.4.2 Calculation assumptions . 120 E.4.3 Calculation of organic gaseous compounds . 120 Annex F (normative)
Measuring procedure for particulate matter (PM) . 122 F.1 General principle . 122 F.2 Heated filter . 122 F.2.1 General. 122 F.2.2 Test set-up . 122 F.2.3 Test procedure . 124 SIST EN 16510-1:2018
Guideline for the characteristics to be taken into account in order to decide on families of appliances . 139 G.1 Principles . 139 G.2 Example for the determination of the appliances to be tested . 139 G.3 Principles for determination of efficiency, carbon monoxide emission and safety distances to combustible materials in initial type tests of a family of appliances . 140 Annex H (informative)
Spread of measuring results as a basis for
market surveillance measurements . 145 Annex I (informative)
Standing Air Loss . 146 I.1 General . 146 I.2 Requirements . 146 I.3 Test Method . 146 I.3.1 Type B appliance . 146 I.3.2 Type BE appliance . 146 Annex J (informative)
A–deviations . 149 Bibliography . 150
1) ISO 331:1983 is withdrawn. SIST EN 16510-1:2018
...