EN 16798-17:2017
(Main)Energy performance of buildings - Ventilation for buildings - Part 17: Guidelines for inspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11, M7-11)
Energy performance of buildings - Ventilation for buildings - Part 17: Guidelines for inspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11, M7-11)
This European Standard specifies the common methodology and the requirements for inspection of air conditioning systems in buildings for space cooling and/or heating and/or ventilation systems from an energy use standpoint. It can be used to fulfil the EPBD requirements (Energy Performance of Buildings Directive 2010/31/EU [9]) as well as in other contexts where such inspections are specified. The methodology specified in this standard deals with indoor climate problems that can be due to the systems inspected.
This standard applies to both residential and non-residential buildings equipped with:
- air conditioning system(s) without mechanical ventilation; or
- air conditioning system(s) with mechanical ventilation; or
- natural and mechanical ventilation system(s).
This standard applies to:
- fixed systems;
- accessible parts that contribute to the cooling and mechanical ventilation services.
This standard is also applicable to some systems for which the Directive does not require inspection, such as:
- fixed systems of less than 12 kW output;
- ventilation-only systems.
The inspection of systems given in this standard is applicable to:
- all types of comfort cooling and air conditioning systems. This includes air conditioning systems of an effective rated output of less than 12 kW not covered by Directive 2010/31/EU;
- all types of ventilation systems that is to say mechanical, natural, hybrid (including mechanical and natural ventilation). Parts of this standard are also applicable to check ventilation requirements when there is no ventilation system.
The inspection of systems includes but is not limited to the following components:
- reverse-cycle operation of air-conditioning equipment;
- associated water and air distribution and exhaust systems that form a necessary part of the system;
- controls that are intended to regulate the use of associated water and air distribution and exhaust systems.
Table 1 shows the relative position of this standard within the offset of EPB standards in the context of the modular structure as set out in EN ISO 52000 1:2017.
NOTE 1 In CEN ISO/TR 52000 2:2017 [7] the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2, Table A.1 and Table B.1.
This standard is not applicable to:
- qualification of the persons or organization in charge of inspections;
- frequency of the mandatory inspection (defined at national level);
- components supporting the heating function (specified in EN 15378-1:2017 [8] and the accompanying technical report CEN/TR 15378-2:2017 [8] covering the inspection of heating-only systems using boilers).
The following information can be found in other standards or technical reports:
- guidance regarding features affecting the frequency and duration of inspection are given in CEN/TR 16798-18:2017;
- procedures and methods for the inspection of boilers and heating systems are given in prEN 15378 (all parts) [8].
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000 1:2017.
Energetische Bewertung von Gebäuden - Lüftung von Gebäuden - Teil 17: Leitlinien für die Inspektion von Lüftungs- und Klimaanlagen (Module M4‐11, M5‐11, M6‐11, M7‐11)
1.1 Diese Europäische Norm legt die übliche Methodik für und die Anforderungen an die Inspektion von in Gebäuden installierten Klimaanlagen für Raumkühlung und/oder Heizung und/oder Lüftungsanlagen fest, bezogen auf den Energieverbrauch, um die Anforderungen der Richtlinie 2010/31/EU des Europäischen Parlaments und des Rates über die Gesamtenergieeffizienz von Gebäuden (en: Energy Performance of Buildings Directive, EPBD) zu erfüllen. Die in dieser Europäischen Norm beschriebene Methodik behandelt Probleme des Innenraumklimas, die durch die inspizierten Anlagen auftreten können.
Diese Europäische Norm gilt für Wohn- und Nichtwohngebäude, die ausgestattet sind mit:
- Klimaanlage(n) ohne maschinelle Lüftung; oder
- Klimaanlage(n) mit maschineller Lüftung; oder
- natürlicher/n und maschineller/n Lüftungsanlage(n).
Diese Europäische Norm gilt für:
- ortsfeste Anlagen;
- zugängliche Teile, die zur Kühlleistung und maschinellen Lüftungsleistung beitragen.
Diese Europäische Norm gilt außerdem für einige Anlagen, die nicht durch die Richtlinie abgedeckt sind, z. B.:
- ortsfeste Anlagen mit einer Nennleistung von weniger als 12 kW;
- Lüftungsanlagen.
Die in dieser Europäischen Norm beschriebene Inspektion von Anlagen gilt für:
- alle Arten von Komfortkühl- und Klimaanlagen. Dazu gehören Klimaanlagen mit einer effektiven Nennleistung von weniger als 12 kW, die nicht durch die EPBD 2010/31/EU abgedeckt sind;
- alle Arten von maschinellen, natürlichen und Hybridlüftungsanlagen (mit maschineller und natürlicher Lüftung). Teile dieser Europäischen Norm sind außerdem anwendbar, um Anforderungen an die Lüftung zu überprüfen, wenn keine Lüftungsanlage vorhanden ist.
Die Inspektion von Anlagen umfasst, ist jedoch nicht beschränkt auf, die folgenden Komponenten:
- Klimaanlagen mit Umkehrfunktion;
- zugehörige Wasser- und Luftverteilungssysteme sowie Fortluftsysteme, die einen notwendigen Teil der Anlage bilden;
- Steuerungssysteme, die die Nutzung der zugehörigen Wasser- und Luftverteilungssysteme sowie Fortluftsysteme regeln sollen.
Tabelle 1 zeigt die relative Position dieser Europäischen Norm innerhalb des EPBD-Normenpakets.
1.2 Diese Europäische Norm gilt nicht für:
- die Qualifizierung der für die Inspektion verantwortlichen Personen oder Organisationen;
- die Häufigkeit der obligatorischen Inspektion (auf nationaler Ebene festgelegt);
- Bauteile, die die Heizungsfunktion unterstützen (in EN 16798 und im beigefügten Technischen Bericht CEN/TR 16798 für die Inspektion von Nur-Heizungsanlagen mit Heizkesseln definiert).
1.3 Die folgenden Informationen können anderen Normen oder Technischen Berichten entnommen werden:
- Hinweise zur Häufigkeit der Inspektionen und Inspektionsintervallen sind in CEN/TR 16798 18 angegeben;
- Verfahren und Methoden für die Inspektion von Heizkesseln und Heizungssystemen sind in EN 15378 [5] enthalten.
Performance énergétique des bâtiments - Ventilation des bâtiments - Partie 17 : Lignes directrices pour l'inspection des systèmes de ventilation et de conditionnement d'air (Module M4-11, M5-11, M6-11, M7-11)
La présente Norme européenne spécifie la méthode commune et les prescriptions relatives à l'inspection des systèmes de conditionnement d'air dans les bâtiments pour le refroidissement et/ou le chauffage des locaux, et/ou des systèmes de ventilation en matière de consommation énergétique. Elle peut être utilisée pour satisfaire aux exigences de la DPEB (Directive 2010/31/UE [9] sur la Performance énergétique des bâtiments) et dans d’autres cas où des inspections sont spécifiées. La méthodologie décrite dans la présente norme traite des problèmes de climat intérieur pouvant être dus aux systèmes inspectés.
La présente norme s'applique aux bâtiments résidentiels et non résidentiels équipés de :
- système(s) de conditionnement d'air sans ventilation mécanique ; ou
- système(s) de conditionnement d'air avec ventilation mécanique ; ou
- système(s) de ventilation naturelle et mécanique.
La présente norme s'applique aux :
- systèmes fixes ;
- parties accessibles contribuant aux services de refroidissement et de ventilation mécanique.
La présente norme s'applique également à certains systèmes dont la Directive ne requiert pas d’inspection tels que :
- les systèmes fixes d’une puissance fournie inférieure à 12 kW ;
- les systèmes servant uniquement à la ventilation.
L'inspection de systèmes décrite dans la présente norme s'applique à :
- tous les types de systèmes de refroidissement et de conditionnement d'air de confort. Cela inclut les systèmes de conditionnement d'air d'une puissance nominale effective fournie inférieure à 12 kW non couverts par la Directive 2010/31/UE ;
- tous les types de systèmes de ventilation, c'est-à-dire mécanique, naturelle, hybride (y compris la ventilation mécanique et naturelle). Des parties de la présente norme s'appliquent également pour la vérification des prescriptions relatives à la ventilation lorsqu'il n'y a pas de système de ventilation.
L'inspection des systèmes comprend, mais n'est pas limitée, aux éléments suivants :
- fonctionnement réversible de l'équipement de conditionnement d'air ;
- distribution d’eau et d’air associée et systèmes de rejet qui constituent une partie nécessaire du système ;
- commandes destinées à réguler l'utilisation de la distribution d’eau et d’air associée ainsi que des systèmes de rejet.
Le Tableau 1 indique la position relative de la présente norme dans l’ensemble de normes PEB dans le cadre de la structure modulaire donnée dans l'EN ISO 52000 1:2017.
NOTE 1 Le même tableau figure dans le CEN ISO/TR 52000-2:2017 [7] avec, pour chaque module, le numéro des normes PEB correspondantes et les rapports techniques associés qui sont publiés ou en cours d'élaboration.
NOTE 2 Les modules représentent des normes PEB, bien qu'une norme PEB puisse couvrir plus d'un module et qu'un module puisse être couvert par plusieurs normes PEB, par exemple une méthode simplifiée et détaillée respectivement. Voir également l'Article 2, le Tableau A.1 et le Tableau B.1.
La présente norme ne s'applique pas :
- à la qualification des personnes ou de l'organisme en charge des inspections ;
- à la fréquence des inspections obligatoires (définie au niveau national) ;
- aux composants participants à la fonction de chauffage (spécifiés dans l'EN 15378 1:2017 [8] et le rapport technique CEN/TR 15378 2:2017 [8] l'accompagnant traitant de l'inspection des systèmes de chauffage uniquement utilisant des chaudières).
Les informations suivantes peuvent être trouvées dans d'autres normes ou rapports techniques :
- les lignes directrices concernant les éléments ayant une influence sur la fréquence et la durée de l'inspection sont données dans le CEN/TR 16798 18:2017 ;
- les procédures et les méthodes pour l'inspection des chaudières et des systèmes de chauffage sont données dans le prEN 15378 (toutes les parties) [8].
(...)
Energijske lastnosti stavb - Prezračevanje stavb - 17. del: Smernice za pregled sistemov prezračevanja in klimatizacije - Moduli M4-11, M5-11, M6-11, M7-11
1.1 Ta evropski standard določa splošno metodologijo in zahteve za pregled klimatskih naprav v stavbah za hlajenje in/ali ogrevanje prostorov in/ali prezračevalnih sistemov z vidika uporabe energije za izpolnjevanje zahtev Direktive EPBD (Direktiva o energetski učinkovitosti stavb 2010/31/EU). Metodologija, opisana v tem evropskem standardu, obravnava težave s klimatizacijo zaprtih prostorov, ki jih lahko povzročijo pregledani sistemi.
Ta standard se uporablja za stanovanjske in nestanovanjske stavbe, ki so opremljene s/z:
– klimatskimi napravami brez mehanskega prezračevanja; ali
– klimatskimi napravami z mehanskim prezračevanjem; ali
– naravnimi in mehanskimi prezračevalnimi sistemi.
Ta evropski standard se uporablja za:
– fiksne sisteme;
– dostopne dele, ki prispevajo k storitvam hlajenja in mehanskega prezračevanja.
Ta evropski standard se uporablja tudi za nekatere sisteme, ki niso zajete v navedeni Direktivi, na primer:
– fiksne sisteme z izhodno močjo pod 12 kW;
– sisteme, ki so namenjeni samo prezračevanju.
Pregled sistemov, opisanih v tem evropskem standardu, se uporablja za:
– vse vrste hladilnih sistemov in klimatskih naprav za večje udobje. To vključuje tudi klimatske naprave z nazivno izhodno močjo pod 12 kW, ki niso zajete v Direktivi 2010/31/EU;
– vse vrste prezračevalnih sistemov, oziroma mehanske, naravne in hibridne sisteme (ki vključujejo mehansko in naravno prezračevanje). Nekateri deli tega evropskega standarda se uporabljajo tudi za preverjanje zahtev za prezračevanje, če prezračevalni sistem ni nameščen.
Pregled sistemov med drugim vključuje tudi pregled naslednjih komponent:
– delovanje obratnega cikla opreme za klimatizacijo;
– povezani sistemi za porazdelitev in odvajanje vode in zraka, ki so obvezen del sistema;
– upravljalni elementi, ki so namenjeni uravnavanju uporabe povezanih sistemov za porazdelitev in odvajanje vode in zraka.
Preglednica 1 prikazuje relativen položaj tega standarda v sklopu standardov EN EPBD.
1.2 Ta evropski standard se ne uporablja za
– usposabljanje oseb ali organizacij, zadolženih za izvajanje pregledov;
– pogostnost obveznih pregledov (opredeljeno na nacionalni ravni);
– komponente, ki podpirajo funkcijo ogrevanja (opredeljene v standardu EN XXXXX in v priloženem tehničnem poročilu CEN/TR XXXXX, ki obravnavata pregledovanje sistemov s kotli, namenjenih izključno ogrevanju).
1.3 Naslednje informacije so na voljo v drugih standardih ali tehničnih poročilih:
– smernice v zvezi z lastnostmi, ki vplivajo na pogostnost in trajanje pregledov, so podane v standardu CEN/TR XXXXX-18;
– postopki in metode za pregledovanje kotlov in ogrevalnih sistemov so podane v standardu EN 15378 [5].
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Performance énergétique des bâtiments - Ventilation des bâtiments - Partie 17 : Lignes directrices pour l'inspection des systèmes de ventilation et de conditionnement d'air (Module M4-11, M5-11, M6-11, M7-11)Energy performance of buildings - Ventilation for buildings - Part 17: Guidelines for inspection of ventilation
and
air conditioning systems (Module M4-11, M5-11, M6-11, M7-11)91.140.30VLVWHPLVentilation and air-conditioning systemsICS:Ta slovenski standard je istoveten z:EN 16798-17:2017SIST EN 16798-17:2018en,fr,de01-julij-2018SIST EN 16798-17:2018SLOVENSKI
STANDARDSIST EN 15240:2007SIST EN 15239:20071DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16798-17
June
t r s y ICS
{ sä s t rä s râ
{ sä s v rä u r Supersedes EN
s w t u {ã t r r yá EN
s w t v rã t r r yEnglish Version
Energy performance of buildings æ Ventilation for buildings æ Part
s yã Guidelines for inspection of ventilation
and
air le M væ s sá M wæ s sá M xæ s sá M yæPerformance énergétique des bâtiments æ Ventilation des bâtiments æ Partie
s y ã Lignes directrices pour l 5inspection des systèmes de ventilation et de
Energetische Bewertung von Gebäuden æ Lüftung von Gebäuden æ Lüftung von Gebäuden æ Teil
s yã Leitlinien für die Inspektion von Lüftungsæ und Klimaanlagen This European Standard was approved by CEN on
t y February
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x y { zæ s yã t r s y ESIST EN 16798-17:2018
Input and method selection data sheet — Template . 34 A.1 General . 34 A.2 References . 35 A.3 Method 1 . 35 A.4 Method 2 . 35 Annex B (informative)
Input and method selection data sheet — Default choices . 36 B.1 General . 36 B.2 References . 37 B.3 Method 1 . 37 B.4 Method 2 . 37 Bibliography . 38
EN Number Recast EPBD EN Number Title EN 15251 EN 16798-1 Energy performance of buildings — Ventilation for buildings — Part 1:
Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics (Module M1-6)
N/A CEN/TR 16798-2
Energy performance of buildings — Ventilation for buildings — Part 2: Interpretation of the requirements in EN 16798-1
— Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics (Module M1-6) EN 13779 EN 16798-3
Energy performance of buildings — Ventilation for buildings — Part 3: For non-residential buildings — Performance requirements for ventilation and room-conditioning systems (Modules M5-1, M5-4) N/A CEN/TR 16798-4
Energy performance of buildings — Ventilation for buildings —
Part 4: Interpretation of the requirements in EN 16798-3 — For non-residential buildings — Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4)
EN 15241 EN 16798-5-1
Energy performance of buildings — Ventilation for buildings — Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) — Method 1: Distribution and generation
EN 15241 EN 16798-5-2
Energy performance of buildings — Ventilation for buildings — Part 5-2: Calculation methods for energy requirements of ventilation systems (Modules M5-6.2, M5-8.2) — Method 2: Distribution and generation
N/A CEN/TR 16798-6
Energy performance of buildings — Ventilation for buildings — Part 6: Interpretation of the requirements in EN 16798-5-1 and EN 16798-5-2 — Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M 6-5, M6-8 , M7-5, M7-8) EN 15242 EN 16798-7
Energy performance of buildings — Ventilation for buildings — Part 7: Calculation methods for the determination of air flow rates in buildings including infiltration (Module M5-5)
N/A CEN/TR 16798-8
Energy performance of buildings — Ventilation for buildings — Part 8: Interpretation of the requirements in EN 16798-7 — Calculation methods for the determination of air flow rates in buildings including infiltration — (Module M5-5)
EN Number Recast EPBD EN Number Title EN 15243 EN 16798-9
Energy performance of buildings — Ventilation for buildings — Part 9: Calculation methods for energy requirements of cooling systems
(Modules M4-1, M4-4, M4-9) — General
N/A CEN/TR 16798-10
Energy performance of buildings — Ventilation for buildings — Part 10: Interpretation of the requirements in EN 16798-9 — Calculation methods for energy requirements of cooling systems (Module M4-1,M4-4, M4-9) — General EN 15243 EN 16798-13
Energy performance of buildings — Ventilation for buildings — Part 13: - Calculation of cooling systems (Module M4-8) — Generation EN 15243 CEN/TR 16798-14
Energy performance of buildings — Ventilation for buildings — Part 14: Interpretation of the requirements in EN 16798-13 — Calculation of cooling systems (Module M4-8) — Generation N/A EN 16798-15
Energy performance of buildings — Ventilation for buildings — Part 15: Calculation of cooling systems (Module M4-7) — Storage
N/A CEN/TR 16798-16
Energy performance of buildings — Ventilation for buildings — Part 16: Interpretation of the requirements in EN 16798-15 — Calculation of cooling systems (Module M4-7) — Storage EN 15239 and EN 15240 EN 16798-17
Energy performance of buildings — Ventilation for buildings — Part 17: Guidelines for inspection of ventilation
and
air
conditioning systems (Module M4-11, M5-11, M6-11, M7-11)
N/A CEN/TR 16798-18
Energy performance of buildings — Ventilation for buildings —
Part 18: Interpretation of the requirements in EN 16798-17 — Guidelines for inspection of ventilation and
air conditioning systems (Module M4-11, M5-11, M6-11, M7-11) According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16798-17:2018
Overarching Building (as such) Technical Building Systems Submodule Descriptions
Descriptions
Descriptions Heating Cooling Ventilation Humidifi cation Dehumidification Domestic Hot water Lighting Building automation and control PV, wind, . sub1
M1
M2
M3 M4 M5 M6 M7 M8 M9 M10 M11 1 General
General
General
2 Common terms and definitions; symbols, units and subscripts
Building Energy Needs
Needs
a
3 Applications
(Free) Indoor Conditions without Systems
Maximum Load and Power
4 Ways to Express Energy Performance
Ways to Express Energy Performance
Ways to Express Energy Performance
5 Building categories and Building Boundaries
Heat Transfer by Transmission
Emission and control
6 Building Occupancy and Operating Conditions
Heat Transfer by Infiltration and Ventilation
Distribution and control
7 Aggregation of Energy Services and Energy Carriers
Internal Heat Gains
Storage and control
8 Building zoning
Solar Heat Gains
Generation and control
Overarching Building (as such) Technical Building Systems Submodule Descriptions
Descriptions
Descriptions Heating Cooling Ventilation Humidifi cation Dehumidification Domestic Hot water Lighting Building automation and control PV, wind, . sub1
M1
M2
M3 M4 M5 M6 M7 M8 M9 M10 M11 9 Calculated Energy Performance
Building Dynamics (thermal mass)
Load dispatching and operating conditions
10 Measured Energy Performance
Measured Energy Performance
Measured Energy Performance
11 Inspection
Inspection
Inspection
EN 16798–17 EN 16798–17 EN 16798–17 EN 16798–17
12 Ways to Express Indoor Comfort
BMS
13 External Environment Conditions
14 Economic Calculation
a
The shaded modules are not applicable 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12097, Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems EN 12599, Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems EN 12792, Ventilation for buildings - Symbols, terminology and graphical symbols EN 14134, Ventilation for buildings - Performance testing and installation checks of residential ventilation systems SIST EN 16798-17:2018
Part 18: Interpretation of the requirements in EN 16798-17 — Guidelines for inspection of ventilation and
air-conditioning systems (Module M4-11, M5-11, M6-11, M7-11) EN ISO 7345, Thermal insulation - Physical quantities and definitions (ISO 7345) EN ISO 52000-1:2017, Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017) NOTE 1 Default references to EPB standards other than EN ISO 52000-1:2017 are identified by the EPB module code number and given in Annex A (normative template) and Annex B (informative default choice). NOTE 2 Example of EPB module code number: M5–5, or M5–5.1 (if module M5–5 is subdivided), or M5–5/1 (if reference to a specific clause of the standard covering M5–5). 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 7345:1995, in EN ISO 52000-1:2017, EN 12792, EN 14511-1 and the following apply. NOTE The terms of EN ISO 52000-1:2017 that are indispensable for the understanding of the underlying standard are repeated here. 3.1 EPB standard standard that complies with the requirements given in EN ISO 52000-1:2017, CEN/TS 16628 and CEN/TS 16629
Note 1 to entry: CEN/TS 16628 and CEN/TS 16629 contain specific rules to ensure overall consistency, unambiguity, transparency and flexibility, supported by common templates. EN ISO 52000-1:2017, the overarching EPB standard, is indispensable for each EPB standard, because of the modular structure, common terms and definitions, symbols and subscripts and because it provides the general framework for the EPB assessment. [SOURCE: EN ISO 52000-1:2017] 3.2 inspection examination of a technical building system including at least collection of documents, on-site visual checks, and a report with recommendations SIST EN 16798-17:2018
Figure 1 — Flow chart representing steps involved in inspection 5.3 Pre-inspection procedure 5.3.1 General Prior to inspection, where possible, the design parameters, system characteristics and the operational regime shall be determined. All available original documentation relating to the building and the installed systems shall be collected and assessed. Additional documentation, if it exists, indicating any modifications or alterations to the building, the systems or the use since the original documents, shall also be obtained and assessed. CEN/TR 16798-18:2017 provides examples of documents needed. The pre-inspection and collection of documents shall be structured as follows: — design documentation; — system characteristics; — building and system operation and maintenance status; — building and system survey. SIST EN 16798-17:2018
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...