EN 14095:2003

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema za pripravo pitne vode v stavbah - Elektrolizno doziranje z aluminijevimi anodami - Zahteve za izvedbo, varnost in preskušanjeAnlagen zur Behandlung von Trinkwasser innerhalb von Gebäuden - Elektrolytische Dosierungsanlagen mit Aluminiumanoden - Anforderungen an Ausführung und Sicherheit, PrüfungAppareils de conditionnement d'eau a l'intérieur des bâtiments - Installations électrolytiques avec anodes en aluminium - Exigences de performances, de sécurité et d'essaisWater conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance, safety and testing91.140.60Sistemi za oskrbo z vodoWater supply systems13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 14095:2003SIST EN 14095:2004en01-maj-2004SIST EN 14095:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14095December 2003ICS 13.060.20; 91.140.60English versionWater conditioning equipment inside buildings - Electrolytictreatment systems with aluminium anodes - Requirements forperformance, safety and testingAppareils de conditionnement d'eau à l'intérieur desbâtiments - Installations électrolytiques avec anodes enaluminium - Exigences de performances, de sécurité etd'essaisAnlagen zur Behandlung von Trinkwasser innerhalb vonGebäuden - Elektrolytische Dosierungsanlagen mitAluminiumanoden - Anforderungen an Ausführung undSicherheit, PrüfungThis European Standard was approved by CEN on 14 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14095:2003 ESIST EN 14095:2004

methods of measurement (CISPR 11:1997,
modified)EN 60335-1, Household and similar electrical appliances - Safety - Part 1: General
requirements (IEC 60335-1:2001, modifiedISO 7858-1, Measurement of water flow in closed conduits -- Combination meters for cold potable water --Part 1: SpecificationsISO 7858-2, Measurement of water flow in closed conduits -- Combination meters for cold potable water --Part 2: Installation requirements3 Terms and definitionsFor the purposes of this European Standard, the following terms and definitions apply:3.1conditioning of water intended for human consumptionmodification of the characteristics of drinking water for a special purpose within the limits stipulated in theDirective 98/83/EEC, adopted in national legislation of the Member StatesSIST EN 14095:2004
...