General Information

Abstract

This European Standard specifies the requirements for industrial piping systems and supports, including safety systems, made of metallic materials with a view to ensure safe operation.
This European Standard is applicable to metallic piping above ground, ducted or buried, irrespective of pressure.
This European Standard is not applicable to:
-   Pipelines and their accessories;
-   Stream waterways such as penstocks, pressure tunnels, pressure shaft for hydro-electric-installations and their related specific accessories;
-   Piping for vehicles covered by the EEC type approval procedures as laid down in Directives 70/156/EEC [1], 74/150/EEC [2] and 92/61/EEC [3];
-   Items specifically designed for nuclear use, failure of which may cause an emission of radioactivity;
-   Well-control equipment used in the petroleum, gas or geothermal exploration and extraction industry and in underground storage which is intended to contain and/or control well pressure, including the piping;
-   Piping of blast furnaces including the furnace cooling, hot blast recuperators, dust extractors and blast furnace exhaust gas scrubbers and direct reducing cupolas including the furnace cooling, gas converters and vacuum furnaces and pans for melting, re-melting de-gassing and casting of steel and non ferrous metals;
-   Enclosures for high voltage electrical equipment such as switchgear, control gear and transformers;
-   Pressurized pipes for the containment of transmission systems such as for electrical power and telephone cables;
-   Permanently fixed piping for ships, rockets, aircraft and mobile offshore units;
-   Internal piping in medical devices as defined in the Directive 93/142/EEC [4] concerning medical devices;
-   Internal piping of boilers and piping integral to pressure vessels.

Status
Withdrawn
Publication Date
27-Jun-2017
Withdrawal Date
22-Sep-2026
ICS
23.040.03 - Pipeline and its parts for external water conveyance systems
Technical Committee
CEN/TC 267 - Industrial piping and pipelines
Drafting Committee
CEN/TC 267/WG 8 - Maintenance of EN 13480 series
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
24-Jul-2024
Completion Date
23-Sep-2026
Directive
Harmonized Standard2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
OJ Ref: C, C 389 OJ Date: 17-Nov-2017
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 13480-1:2018 - Metallic industrial piping - Part 1: General

Buy Documents

Relations

Replaces
EN 13480-1:2012 - Metallic industrial piping - Part 1: General
Effective Date
08-Jun-2022
Replaced By
EN 13480-1:2024 - Metallic industrial piping - Part 1: General
Effective Date
11-May-2022
Refers
EN ISO 4126-6:2014 - Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2014)
Effective Date
28-Jan-2026
Refers
EN 764-7:2002 - Pressure equipment - Part 7: Safety systems for unfired pressure equipment
Effective Date
28-Jan-2026
Refers
EN ISO 4126-3:2020 - Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2020)
Effective Date
28-Jan-2026
Refers
EN ISO 4126-5:2013 - Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013)
Effective Date
28-Jan-2026
Refers
CEN/TR 13480-7:2002 - Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures
Effective Date
28-Jan-2026
Refers
EN 13480-8:2017 - Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
Effective Date
28-Jan-2026
Refers
EN ISO 4126-1:2013 - Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2013)
Effective Date
28-Jan-2026
Refers
EN 13480-6:2017 - Metallic industrial piping - Part 6: Additional requirements for buried piping
Effective Date
28-Jan-2026
Refers
EN ISO 4126-7:2013/A1:2016 - Safety devices for protection against excessive pressure - Part 7: Common data - Amendment 1 (ISO 4126-7:2013/Amd 1:2016)
Effective Date
28-Jan-2026
Refers
EN 16668:2016+A1:2018 - Industrial valves - Requirements and testing for metallic valves as pressure accessories
Effective Date
28-Jan-2026
Refers
EN ISO 4126-5:2013/A1:2016 - Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) - Amendment 1 (ISO 4126-5:2013/Amd 1:2016)
Effective Date
28-Jan-2026
Refers
EN 13480-3:2017 - Metallic industrial piping - Part 3: Design and calculation
Effective Date
28-Jan-2026
Refers
EN 764-1:2015+A1:2016 - Pressure equipment - Part 1: Vocabulary
Effective Date
28-Jan-2026

Buy Documents

Get Certified

Connect with accredited certification bodies for this standard

Institut za varilstvo d.o.o. (Welding Institute)

Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au

SA Slovenia Verified
Visit Website

Sponsored listings

Frequently Asked Questions

EN 13480-1:2017 is a standard published by the European Committee for Standardization (CEN). Its full title is "Metallic industrial piping - Part 1: General". This standard covers: This European Standard specifies the requirements for industrial piping systems and supports, including safety systems, made of metallic materials with a view to ensure safe operation. This European Standard is applicable to metallic piping above ground, ducted or buried, irrespective of pressure. This European Standard is not applicable to: - Pipelines and their accessories; - Stream waterways such as penstocks, pressure tunnels, pressure shaft for hydro-electric-installations and their related specific accessories; - Piping for vehicles covered by the EEC type approval procedures as laid down in Directives 70/156/EEC [1], 74/150/EEC [2] and 92/61/EEC [3]; - Items specifically designed for nuclear use, failure of which may cause an emission of radioactivity; - Well-control equipment used in the petroleum, gas or geothermal exploration and extraction industry and in underground storage which is intended to contain and/or control well pressure, including the piping; - Piping of blast furnaces including the furnace cooling, hot blast recuperators, dust extractors and blast furnace exhaust gas scrubbers and direct reducing cupolas including the furnace cooling, gas converters and vacuum furnaces and pans for melting, re-melting de-gassing and casting of steel and non ferrous metals; - Enclosures for high voltage electrical equipment such as switchgear, control gear and transformers; - Pressurized pipes for the containment of transmission systems such as for electrical power and telephone cables; - Permanently fixed piping for ships, rockets, aircraft and mobile offshore units; - Internal piping in medical devices as defined in the Directive 93/142/EEC [4] concerning medical devices; - Internal piping of boilers and piping integral to pressure vessels.

This European Standard specifies the requirements for industrial piping systems and supports, including safety systems, made of metallic materials with a view to ensure safe operation. This European Standard is applicable to metallic piping above ground, ducted or buried, irrespective of pressure. This European Standard is not applicable to: - Pipelines and their accessories; - Stream waterways such as penstocks, pressure tunnels, pressure shaft for hydro-electric-installations and their related specific accessories; - Piping for vehicles covered by the EEC type approval procedures as laid down in Directives 70/156/EEC [1], 74/150/EEC [2] and 92/61/EEC [3]; - Items specifically designed for nuclear use, failure of which may cause an emission of radioactivity; - Well-control equipment used in the petroleum, gas or geothermal exploration and extraction industry and in underground storage which is intended to contain and/or control well pressure, including the piping; - Piping of blast furnaces including the furnace cooling, hot blast recuperators, dust extractors and blast furnace exhaust gas scrubbers and direct reducing cupolas including the furnace cooling, gas converters and vacuum furnaces and pans for melting, re-melting de-gassing and casting of steel and non ferrous metals; - Enclosures for high voltage electrical equipment such as switchgear, control gear and transformers; - Pressurized pipes for the containment of transmission systems such as for electrical power and telephone cables; - Permanently fixed piping for ships, rockets, aircraft and mobile offshore units; - Internal piping in medical devices as defined in the Directive 93/142/EEC [4] concerning medical devices; - Internal piping of boilers and piping integral to pressure vessels.

EN 13480-1:2017 is classified under the following ICS (International Classification for Standards) categories: 23.040.03 - Pipeline and its parts for external water conveyance systems. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 13480-1:2017 has the following relationships with other standards: It is inter standard links to EN 13480-1:2012, EN 13480-1:2024, EN ISO 4126-6:2014, EN 764-7:2002, EN ISO 4126-3:2020, EN ISO 4126-5:2013, CEN/TR 13480-7:2002, EN 13480-8:2017, EN ISO 4126-1:2013, EN 13480-6:2017, EN ISO 4126-7:2013/A1:2016, EN 16668:2016+A1:2018, EN ISO 4126-5:2013/A1:2016, EN 13480-3:2017, EN 764-1:2015+A1:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 13480-1:2017 is associated with the following European legislation: EU Directives/Regulations: 2014/68/EU; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 13480-1:2017 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kovinski industrijski cevovodi - 1. del: SplošnoMetallische industrielle Rohrleitungen - Teil 1: AllgemeinesTuyauteries industrielles métalliques - Partie 1: GénéralitésMetallic industrial piping - Part 1: General77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific use23.040.10Železne in jeklene ceviIron and steel pipesICS:Ta slovenski standard je istoveten z:EN 13480-1:2017SIST EN 13480-1:2018en,fr,de01-januar-2018SIST EN 13480-1:2018SLOVENSKI
STANDARDSIST EN 13480-1:20121DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13480-1
June
t r s y ICS
t uä r v rä r u Supersedes EN
s u v z ræ sã t r s tEnglish Version
Metallic industrial piping æ Part
sã General Tuyauteries industrielles métalliques æ Partie
s ã Généralité
Metallische industrielle Rohrleitungen æ Teil
sã Allgemeines This European Standard was approved by CEN on
t s June
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u v z ræ sã t r s y ESIST EN 13480-1:2018

EN13480æ1:2017(E)Issue1(2017æ06)2ContentsFPageFEuropeanforeword.3 1Scope.5 2Normativereferences.5 3Terms,definitions,symbolsandunits.6 3.1Termsanddefinitions.6 3.2Symbolsandunits.9 4Interdependencyofthepartsoftheseries.9 5Classificationofpiping.10 5.1General.10 5.2Pipingofcategory0.12 5.3Pipingoperating0,5bar.12 5.4Specialcases.12 6RequirementsforPipingsystems.12 AnnexA(informative)MaintenanceofEN13480.13 A.1Introduction.13 A.2ScopeandcompositionoftheWorkingGroup.13 A.3MethodsofMaintenance.13 A.3.1Administrationtools.13 A.3.2Submissionofqueriesandconsultationoftheexperts.14 A.4Resultsoftheconsultation.14 A.4.1Practicalprovisionsforinterpretations.14 A.4.2Practicalprovisionsforcorrections.15 AnnexY(informative)HistoryofEN13480æ1.16 Y.1DifferencesbetweenEN13480æ1:2012andEN13480æ1:2017.16 AnnexZA(informative)RelationshipbetweenthisEuropeanStandardandtheEssentialRequirementsofEUDirective2014/68/EUaimedtobecovered.17 Bibliography.18 FFFSIST EN 13480-1:2018

EN13480æ1:2017(E)Issue1(2017æ06)3EuropeanforewordpipingFandFpipelinesóáFtheFsecretariatFofFwhichFisFheldFbyFAFNORäFThisFEuropeanFStandardFshallFbeFgivenFtheFstatusFofFaFnationalFstandardáFeitherFbyFpublicationFofFanFidenticalFtextForFbyFendorsementáFatFtheFlatestFbyFDecemberFFtFrFsFyáFandFconflictingFnationalFstandardsFshallFbeFwithdrawnFatFtheFlatestFbyFDecemberFFtFrFsFyäFAttentionFisFdrawnFtoFtheFpossibilityFthatFsomeFofFtheFelementsFofFthisFdocumentFmayFbeFtheFsubjectFofFleFforFidentifyingFanyForFallFsuchFpatentFrightsäFThisFdocumentFhasFbeenFpreparedFunderFaFmandateFgivenFtoFCENFbyFtheFEuropeanFCommissionFandFtheFEuropeanFFreeFTradeFAssociationáFandFsupportsFessentialFrequireForFrelationshipFwithFEUFDirectiáFwhichFisFanFintegralFpartFofFthisFdocumentäFThisFEuropeanFStandardFENFFsFuFvFzFrFforFmetallicFindustrialFpipingFconsistsFofFeightFinterdependentFandFnotFdissociableFPartsFwhichFareãF Part1:General; Part2:Materials; Part3:Designandcalculation; Part4:Fabricationandinstallation; Part5:Inspectionandtesting; Part6:Additionalrequirementsforburiedpiping; CEN/TR13480æ7,Guidanceontheuseofconformityassessmentprocedures; Part8:Additionalrequirementsforaluminiumandaluminiumalloypiping.AlthoughFtheseFPartsFmayFbeFobtainedFseparatelyáFitFshouldFbeFrecognisedFthatFtheFPartsFareFinterædependantäFAsFsuchFtheFmanufactureFofFmetallicFindustrialFpipingFrequiresFtheFapplicationFofFallFtheFrelevantFPartsFinForderFforFtheFrequirementsFofFtheFStandardFtoFbeFsatisfactorilyFfulfilledäFThisFEuropeanFStandardFwillFbeFmaintainedFbyFaFMaintenanceFMHDFworkingFgroupFwhoseFscopeFofFworkingFisFlimitedFtoFcorrectionsFandFinterpretationsFrelatedFtoFENFFsFuFvFzFräFSIST EN 13480-1:2018

EN13480æ1:2017(E)Issue1(2017æ06)4submittingFquestionsFcanFbeFdownloadedFfromFtheFlinkFtoFtheFMHDFwebsiteäFAfterFsubjectFexpertsFhaveFagreedFanFansweráFtheFanswerFwillFbeFcommunicatedFtoFtheFquestioneräFCorrectedFpagesFwillFbeFgivenFspecificFissueFnumberFandFissuedFbyFCENFaccordingFtoFCENFRulesäFInterpretationFsheetsFwillFbeFpostedFonFtheFwebsiteFofFtheFMHDäFThisFdocumentFsupersedesFENFFsFuFvFzFræFsãFtFrFsFtäFThisFnewFeditionFincorporatesFtheFAmendmentsFwhichFhaveFbeenFapprovedFpreviouslyFbyFCENFmembersáFandFtheFcorrectedFpagesFupFtoFIssueFFvFwithoutFanyFfurtherFtechnicalFchangeäFAnnexFYFprovidesFdetailsFofFsignificantFtechnicalFchangesFbetweenFthisFEuropeanFStandardFandFtheFpreviousFeditionäFAmendmentsFtoFthisFnewFeditionFmayFbeFissuedFfromFtimeFtoFtimeFandFthenFusedFimmediatelyFasFalternativesFtoFrulesFcontainedFhereinäFAccordingFtoFtheFCENæCENELECFInternalFRegulationsáFtheFnationalFstandardsForganizationsFofFtheFfollowingFcountriesFareFboundFtoFimplementFthisFEuropeanFStandardãFAustriaáFBelgiumáFBulgariaáFCroatiaáFCyprusáFCzechFRepublicáFDenmarkáFEstoniaáFFinlandáFFormerFYugoslavFRepublicFofFMacedoniaáFFranceáFGermanyáFGreeceáFHungaryáFIcelandáFIrelandáFItalyáFLatviaáFLithuaniaáFLuxembourgáFMaltaáFNetherlandsáFNorwayáFPolandáFPortugaláFRomaniaáFSerbiaáFSlovakiaáFSloveniaáFSpaináFSwedenáFSwitzerlandáFTurkeyFandFtheFUnitedFKingdomäFFFFFFFFFFFFFFFFFFSIST EN 13480-1:2018

EN13480æ1:2017(E)Issue1(2017æ06)51 ScopeThisFEuropeanFStandardFspecifiesFtheFrequirementsFforFindustrialFpipingFsystemsFandFsupportsáFincludingFsafetyFsystemsáFmadeFofFmetallicFmaterialsFwithFaFviewFtoFensureFsafeFoperationäFThisFEuropeanFStandardFisFapplicableFtoFmetallicFpipingFaboveFgroundáFductedForFburiedáFirrespectiveFofFpressureäFThisFEuropeanFStandardFisFnotFapplicableFtoãF PipelinesFandFtheirFaccessoriesâF StreamFwaterwaysFsuchFasFpenstocksáFpressureFtunnelsáFpressureFshaftFforFhydroæelectricæinstallationsFandFtheirFrelatedFspecificFaccessoriesâF PipingFforFvehiclesFcoveredFbyFtheFEECFtypeFapprovalFproceduresFasFlaidFdownFinFDirectivesF ItemsFspecificallyFdesignedFforFnuclearFuseáFfailureFofFwhichFmayFcauseFanFemissionFofFradioactivityâF WellæcontrolFequipmentFusedFinFtheFpetroleumáFgasForFgeothermalFexplorationFandFextractionFindustryFandFinFundergroundFstorageFwhichFisFintendedFtoFcontaiincludingFtheFpipingâF PipingFofFblastFfurnacesFincludingFtheFfurnaceFcoolingáFhotFblastFrecuperatorsáFdustFextractorsFandFblastFfurnaceFexhaustFgasFscrubbersFandFdirectFreducingFcupolasFincludingFtheFfurnaceFcoolingáFgasFconvertersFandFvacuumFfurnacesFandFpansFforFmeltingáFreæmeltingFdeægassingFandFcastingFofFsteelFandFnonFferrousFmetalsâF EnclosuresFforFhighFvoltageFelectricalFequipmentFsuchFasFswitchgearáFcontrolFgearFandFtransformersâF PressurizedFpipesFforFtheFcontainmentFofFtransmissionFsystemsFsuchFasFforFelectricalFpowerFandFtelephoneFcablesâF PermanentlyFfixedFpipingFforFshipsáFrocketsáFaircraftFandFmobileFoffshoreFunitsâF InternalFpipingFinFmedicalFdevicesFasFdefinedFinFtheFDirectiveFdevicesâF InternalFpipingFofFboilersFandFpipingFintegralFtoFpressureFvesselsäF2 NormativereferencesTheFfollowingFdocumentsáFinFwholeForFinFpartáFareFnormativelyFreferencedFinFthisFdocumentFandFareFindispensableFforFitsFapplicationäFForFdatedFreferencesáFonlyFtheFeditionFcitedFappliesäFForFundatedFreferencesáFtheFlatestFFFSIST EN 13480-1:2018

EN13480æ1:2017(E)Issue1(2017æ06)6ENFFyFxFvæFtãFtFrFrFtáFPressureequipment—Part2:Quantities,symbolsandunitsFENFFyFxFvæFuãFtFrFrFtáFPressureequipment—Part3:DefinitionsandpartiesinvolvedFENFFsFuFvFzFræFtãFtFrFsFyáFMetallicindustrialpiping—Part2:MaterialsFENFFsFuFvFzFræFuãFtFrFsFyáFMetallicindustrialpiping—Part3:DesignandcalculationFENFFsFuFvFzFræFvãFtFrFsFyáFMetallicindustrialpiping—Part4:FabricationandinstallationFENFFsFuFvFzFræFwãFtFrFsFyáFMetallicindustrialpiping—Part5:InspectionandtestingFENFFsFuFvFzFræFxãFtFrFsFyáFMetallicindustrialpiping—Part6:AdditionalrequirementsforburiedpipingFMetallicindustrialpiping—Part7:GuidanceontheuseofconformityassessmentproceduresFENFFsFuFvFzFræFzãFtFrFsFyáFMetallicindustrialpiping—Part8:Additionalrequirementsforaluminiumandaluminiumalloypiping3 Terms,definitions,symbolsandunits3.1 TermsanddefinitionsForFtheFpurposesFofFthisFEuropeanFStandardáFtheFtermsFandFdefinitionsFgivenFinFENFFyFxFvæFuãFtFrFrFtFandFtheFfollowingFapplyäFFSpecificFdefinitionsFareFgivenFinFtheFrelevantFPartsFofFthisFEuropeanFStandardäF3.1.1ambienttemperaturetemperatureFofFtheFsurroundingFatmosphereFinFtheFimmediateFvicinityFofFtheFpipingFsystemF3.1.2pipingsystempipingpipeForFsystemFofFpipesFforFtheFconveyanceFofFfluidsFwithinFanFindustrialFsiteFFNoteFFsFtoFentryFFAFpipingFsystemFcanFbeFregardedFasFoneFsingleFsystemFprovidedFitFconveysFsubstancesFhavingFtheFsameFpropertiesFandFitFisFasFaFwholeFdesignedFforFtheFsameFallowableFpressureäFFNoteFFtFtoFentryFFInterruptionFbyFdifferentFcomponentsFsuchFasFpumpsáFmachinesáFvesselsFetcäFdoesFnotFprecludeFtheFintegrationFtoFoneFsingleFpipingäF3.1.3fluidgasesáFliquidsFandFvapoursFinFpureFphaseFasFwellFasFmixturesFthereofFFNoteFtoFentryFFAFfluidFmayFcontainFaFsuspensionFofFsolidsäFFSIST EN 13480-1:2018

EN13480æ1:2017(E)Issue1(2017æ06)73.1.4manufacturerpersonForForganizationFthatFtakesFfullFresponsibilityFforFtheFdesignFandFmanufactureFofFtheFpipingFsystemFandFitsFconformityFtoFENFFsFuFvFzFrFNoteFFsFtoFentryFFTheFmanufacturerFisFresponsibleFforFcarryingFoutFallFrelevantFproductionFprocessesFandFtestingFasFspecifiedFinFtheFapplicableFstandardsäFFNoteFFtFtoFentryFFIfFaFmanufacturerFemploysFsubcontractorsForFfaresponsibleFforFtheirFworkäFNoteFFuFtoFentryFFInFtheFECFMemberFStatesFaFmanufacturerForFhisFrepresentativeFisFresponsibleFforFtheFconformanceFofFaFpipingFsystemFheFputsFonFtheFmarketáFwithFtheFessentialFsafetyFrequirementsFofFtheFPEDäF3.1.5pipingfabricatorand/orinstallerindividualForForganizationFthatFtakesFresponsibilityFforFtheFfapipingFcomplyingFwithFtheFrequirementsFofFENFFsFuFvFzFrFNoteFtoFentryFFTheFpipingFfabricatorForFtheFinstallerFmayFbeFtheFmanufacturerF3.1.6designerindividualForForganizationFthatFtakesFresponsibilityFforFtheFdesignFofFindustrialFpipingFcomplyingFwithFtheFrequirementsFofFENFFsFuFvFzFrFNoteFtoFentryFFTheFdesignerFcanFalsoFbeFtheFmanufactureräF3.1.7categorycategoryFinFwhichFindustrialFpipingFisFclassifiedFNoteFtoFentryFFTheFcategoryFdependsFonFtheFfluidFcontainedáFtheFmaximumFallowableFpressureFPSFandFnominalFsizeFDNandFtheFphysicalFconditionFofFtheFfluidäF3.1.8testinFaccordanceFwithFaFdefinedFprocedureFwhichFprovidesFanFobjectiveFassessmentFofFaFcharacteristicFofFaFcomponentForFsystemFNoteFtoFentryFFSeeFFigureFFuäFsæFsäF3.1.9testingperfor
...