CEN/TS 13126-2:2004
(Main)Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 2: Casement fastener handles
General Information
- Abstract
This Part of Technical Specification 13126 specifies the requirements and test methods for durability, strength, security and function of casement fastener handles. It applies to all face fixed casement fastener handles fitted to hinged or pivoted windows made from any material.
NOTE There are limitations to the size and mass of windows fastened by these components, related to the physical ability of the user. The use of single fasteners should be restricted to windows of 0,9 m2 and a maximum height of 1 400 mm. Above that size, additional fasteners are recommended.
The components are not recommended for use on door height windows
- Status
- Withdrawn
- Publication Date
- 06-Apr-2004
- Withdrawal Date
- 11-Oct-2011
- Technical Committee
- CEN/TC 33 - Doors, windows, shutters and building hardware
- Drafting Committee
- CEN/TC 33/WG 4 - Building hardware
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 12-Oct-2011
- Completion Date
- 12-Oct-2011
- Directive
- Harmonized Standard305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Not Harmonized89/106/EEC - Construction products
Relations
- Effective Date
- 15-Oct-2011
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
CEN/TS 13126-2:2004 is a technical specification published by the European Committee for Standardization (CEN). Its full title is "Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 2: Casement fastener handles". This standard covers: This Part of Technical Specification 13126 specifies the requirements and test methods for durability, strength, security and function of casement fastener handles. It applies to all face fixed casement fastener handles fitted to hinged or pivoted windows made from any material. NOTE There are limitations to the size and mass of windows fastened by these components, related to the physical ability of the user. The use of single fasteners should be restricted to windows of 0,9 m2 and a maximum height of 1 400 mm. Above that size, additional fasteners are recommended. The components are not recommended for use on door height windows
This Part of Technical Specification 13126 specifies the requirements and test methods for durability, strength, security and function of casement fastener handles. It applies to all face fixed casement fastener handles fitted to hinged or pivoted windows made from any material. NOTE There are limitations to the size and mass of windows fastened by these components, related to the physical ability of the user. The use of single fasteners should be restricted to windows of 0,9 m2 and a maximum height of 1 400 mm. Above that size, additional fasteners are recommended. The components are not recommended for use on door height windows
CEN/TS 13126-2:2004 is classified under the following ICS (International Classification for Standards) categories: 91.190 - Building accessories. The ICS classification helps identify the subject area and facilitates finding related standards.
CEN/TS 13126-2:2004 has the following relationships with other standards: It is inter standard links to EN 13126-2:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
CEN/TS 13126-2:2004 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
CEN/TS 13126-2:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2005
Stavbno okovje, pritrjevalni sistemi za okna in zastekljena vrata – Zahteve in
preskusne metode – 2. del: Okenska zapirala
Building hardware, fittings for windows and door height windows - Requirements and
test methods - Part 2: Casement fastener handles
Baubeschläge, Beschläge für Fenster und Fenstertüren - Anforderungen und
Prüfverfahren - Teil 2: Fenstergriffe
Quincaillerie pour le bâtiment, ferrures de fenetres et portes-fenetres - Exigences et
méthodes d'essai - Partie 2 : Poignées a ergot de verrouillage
Ta slovenski standard je istoveten z: CEN/TS 13126-2:2004
ICS:
91.190 Stavbna oprema Building accessories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
----------
...