EN ISO 14631:1999
(Main)Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:1999)
General Information
- Abstract
This standard specifies the requirements and test methods for solid flat extruded sheets of impact-modified polystyrene (PS-I1) without fillers and reinforcing materials. This standard applies only to thickness 0,25 mm to 20,0 mm in accordance with clause 3. This standard also applies to PS-I sheet in roll form.
- Status
- Withdrawn
- Publication Date
- 31-Jan-1999
- Withdrawal Date
- 16-Sep-2026
- Technical Committee
- CEN/TC 249 - Plastics
- Drafting Committee
- CEN/TC 249/SC 6 - Thermoplastic films, foils and sheets
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 30-Jun-2021
- Completion Date
- 17-Sep-2026
Relations
- Effective Date
- 07-Jul-2021
- Effective Date
- 25-Aug-2026
- Effective Date
- 25-Aug-2026
- Effective Date
- 09-Feb-2026
- Refers
ISO 11501:1995 - Plastics — Film and sheeting — Determination of dimensional change on heating - Effective Date
- 09-Feb-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
DIN CERTCO
DIN Group product certification.
Smithers Quality Assessments
US management systems and product certification.
Sponsored listings
Frequently Asked Questions
EN ISO 14631:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:1999)". This standard covers: This standard specifies the requirements and test methods for solid flat extruded sheets of impact-modified polystyrene (PS-I1) without fillers and reinforcing materials. This standard applies only to thickness 0,25 mm to 20,0 mm in accordance with clause 3. This standard also applies to PS-I sheet in roll form.
This standard specifies the requirements and test methods for solid flat extruded sheets of impact-modified polystyrene (PS-I1) without fillers and reinforcing materials. This standard applies only to thickness 0,25 mm to 20,0 mm in accordance with clause 3. This standard also applies to PS-I sheet in roll form.
EN ISO 14631:1999 is classified under the following ICS (International Classification for Standards) categories: 83.140 - Rubber and plastics products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 14631:1999 has the following relationships with other standards: It is inter standard links to EN ISO 14631:2021, ISO 1183:1987, ISO 2897-1:1997, ISO 1043-1:1997, ISO 11501:1995, EN 1156:2013, EN 179:2008, EN ISO 6603-1:2000, EN ISO 527-1:2019, EN ISO 2039-1:2003, EN ISO 2818:2019, EN 13055-2:2004, EN ISO 291:2008, EN ISO 306:2022, EN ISO 527-2:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 14631:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Extrudierte Tafeln aus schlagzäh-modifiziertem Polystyrol (PS-I) - Anforderungen und Prüfverfahren (ISO 14631:1999)Plaques extrudées en polystyrene résistant au choc (PS-I) - Prescriptions et méthodes d'essai (ISO 14631:1999)Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:1999)83.140.10Filmi in folijeFilms and sheetsICS:Ta slovenski standar
...