EN 15339-2:2007
(Main)Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units
General Information
- Abstract
This European Standard specifies safety requirements of machines and equipment for thermal spraying, in this case of gas control units. This European Standard should be used in conjunction with the Part 1 which deals with general aspects when designing, manufacturing, and/or putting in service of machines or equipment.
Generally the requirements of EU-Directive 94/9/EC are valid for the use of this European Standard.
- Status
- Withdrawn
- Publication Date
- 13-Mar-2007
- Withdrawal Date
- 22-Sep-2026
- Technical Committee
- CEN/TC 240 - Thermal spraying and thermally spraying coatings
- Drafting Committee
- CEN/TC 240 - Thermal spraying and thermally spraying coatings
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 14-Jul-2021
- Completion Date
- 23-Sep-2026
Relations
- Effective Date
- 20-Feb-2019
Get Certified
Connect with accredited certification bodies for this standard
DVS-ZERT GmbH
German welding certification society.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
EWF/IIW (European/International Welding Federation)
International welding personnel certification.
Sponsored listings
Frequently Asked Questions
EN 15339-2:2007 is a standard published by the European Committee for Standardization (CEN). Its full title is "Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units". This standard covers: This European Standard specifies safety requirements of machines and equipment for thermal spraying, in this case of gas control units. This European Standard should be used in conjunction with the Part 1 which deals with general aspects when designing, manufacturing, and/or putting in service of machines or equipment. Generally the requirements of EU-Directive 94/9/EC are valid for the use of this European Standard.
This European Standard specifies safety requirements of machines and equipment for thermal spraying, in this case of gas control units. This European Standard should be used in conjunction with the Part 1 which deals with general aspects when designing, manufacturing, and/or putting in service of machines or equipment. Generally the requirements of EU-Directive 94/9/EC are valid for the use of this European Standard.
EN 15339-2:2007 is classified under the following ICS (International Classification for Standards) categories: 25.220.20 - Surface treatment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 15339-2:2007 has the following relationships with other standards: It is inter standard links to EN 15339-2:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 15339-2:2007 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control unitsProjection thermique - Exigences de sécurité relatives au matériel de projection thermique - Partie 2: Unités de régulation de l'alimentation en gazThermisches Spritzen - Sicherheitsanforderungen für Einrichtungen für das thermische Spritzen - Teil 2: GaskontrolleinheitenTa slovenski standard je istoveten z:EN 15339-2:2007SIST EN 15339-2:2007en;fr;de25.220.20Površinska obdelavaSurface treatmentICS:SLOVENSKI
STANDARDSIST EN 15339-2:200701-junij-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15339-2March 2007ICS 25.220.20 English VersionThermal spraying - Safety requirements for thermal sprayingequipment - Part 2: Gas control unitsProjection thermique - Exigences de sécurité relatives aumatériel de projection thermique - Partie 2: Unités derégulation de l'alimentation en gazThermisches Spritzen - Sicherheitsanforderungen fürEinrichtungen für das thermische Spritzen - Teil 2:GaskontrolleinheitenThis European Standard was approved by CEN on 3 February 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15339-2:2007: E
Examples for design of gas control units.9 A.1 Simple gas control unit.9 A.2 Gas control-/closed loop control with integrated HMI.10 A.3 Gas control-/closed loop control with separate HMI.10 A.4 Pressurized enclosures.11 A.4.1 General.11 A.4.2 Pressure control.11 A.4.3 Ventilation.12
(IEC 60079-0:2004) EN 60079-1, Electrical apparatus for potentially explosive atmospheres — Part 1: Flameproof enclosure "d" (IEC 60079-1:2003) EN 60079-2, Electrical apparatus for explosive gas atmospheres — Part 2: Pressurized enclosures "p"
(IEC 60079- 2:2001) EN 60079-10, Electrical apparatus for explosive
...