EN 10025-6:2004
(Main)Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
General Information
- Abstract
Part 6 of this document, in addition to part 1, specifies requirements for flat products of high yield strength alloy special steels. The grades and qualities are given in Tables 2 to 4 (chemical composition) and Tables 5 to 7 (mechanical properties) and are supplied in the quenched and tempered condition as given in 6.3.
The steels specified in this document are applicable to hot-rolled flat products with a minimum nominal thickness of 3 mm and a maximum nominal thickness £ 150 mm for grades S460, S500, S550, S620 and S690, a maximum nominal thickness £ 100 mm for grade S890 and a maximum nominal thickness £ 50 mm for grade S960, in steels which, after quenching and tempering, have a specified minimum yield strength of 460 MPa ) to 960 MPa1).
- Status
- Withdrawn
- Publication Date
- 09-Nov-2004
- Withdrawal Date
- 12-May-2009
- Technical Committee
- ECISS/TC 103 - Structural steels other than reinforcements
- Drafting Committee
- ECISS/TC 10 - Structural steels - Qualities
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 13-May-2009
- Completion Date
- 13-May-2009
- Directive
- Harmonized Standard305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Not Harmonized89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 18-Jan-2023
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN 13000:2010 - Cranes - Mobile cranes - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10025-6:2004 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition". This standard covers: Part 6 of this document, in addition to part 1, specifies requirements for flat products of high yield strength alloy special steels. The grades and qualities are given in Tables 2 to 4 (chemical composition) and Tables 5 to 7 (mechanical properties) and are supplied in the quenched and tempered condition as given in 6.3. The steels specified in this document are applicable to hot-rolled flat products with a minimum nominal thickness of 3 mm and a maximum nominal thickness £ 150 mm for grades S460, S500, S550, S620 and S690, a maximum nominal thickness £ 100 mm for grade S890 and a maximum nominal thickness £ 50 mm for grade S960, in steels which, after quenching and tempering, have a specified minimum yield strength of 460 MPa ) to 960 MPa1).
Part 6 of this document, in addition to part 1, specifies requirements for flat products of high yield strength alloy special steels. The grades and qualities are given in Tables 2 to 4 (chemical composition) and Tables 5 to 7 (mechanical properties) and are supplied in the quenched and tempered condition as given in 6.3. The steels specified in this document are applicable to hot-rolled flat products with a minimum nominal thickness of 3 mm and a maximum nominal thickness £ 150 mm for grades S460, S500, S550, S620 and S690, a maximum nominal thickness £ 100 mm for grade S890 and a maximum nominal thickness £ 50 mm for grade S960, in steels which, after quenching and tempering, have a specified minimum yield strength of 460 MPa ) to 960 MPa1).
EN 10025-6:2004 is classified under the following ICS (International Classification for Standards) categories: 77.140.10 - Heat-treatable steels; 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10025-6:2004 has the following relationships with other standards: It is inter standard links to EN 10137-2:1995, EN 10025-6:2004+A1:2009, EN 1993-1-8:2005, EN 13001-3-1:2012+A2:2018, EN 1994-2:2005, EN 13000:2010+A1:2014, EN 13001-3-1:2012, EN 13000:2010, EN 10025-1:2004, EN 13001-3-1:2012+A1:2013, EN 1993-1-1:2005, EN 1994-1-1:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10025-6:2004 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/005, M/120. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10025-6:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered conditionProduits laminés a chaud en aciers de construction - Partie 6: Conditions techniques de livraison pour produits plats des aciers a haute limite d'élasticité a l'état trempé et revenuWarmgewalzte Erzeugnisse aus Baustählen - Teil 6: Technische Lieferbedingungen für Flacherzeugnisse aus Stählen mit höherer Streckgrenze im vergüteten Zustand77.140.50SROL]GHONLFlat steel products and semi-products77.140.10Jekla za toplotno obdelavoHeat-treatable steelsICS:SIST EN 10025-6:2005enTa slovenski standard je istoveten z:EN 10025-6:200401-januar-2005SIST EN 10025-6:2005SLOVENSKI
STANDARDSIST EN 10137-2:19971DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10025-6
November 2004 ICS 77.140.10; 77.140.50
Supersedes EN 10137-2:1995
English version
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
Produits laminés à chaud en aciers de construction -Partie 6: Conditions techniques de livraison pour produits plats des aciers à haute limite d'élasticité à l'état trempé et revenu
Warmgewalzte Erzeugnisse aus Baustählen - Teil 6: Technische Lieferbedingungen für Flacherzeugnisse aus Stählen mit höherer Streckgrenze im vergüteten Zustand This European Standard was approved by CEN on 1 April 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10025-6:2004: E
List of corresponding former designations.21 Annex B (informative)
List of national standards which correspond with ECSC IC 2 referenced.22 Annex C (informative)
Minimum recommended inside bend radii for flanging.23 Bibliography.24
1) 1 MPa = 1 N/mm2.
Steel EN 10025-6 – S460QL
or
Steel EN 10025-6 - 1.8906 5 Information to be supplied by the purchaser 5.1 Mandatory information The information that shall be supplied by the purchaser at the time of the order is specified in EN 10025-1. In addition to EN 10025-1 the following information shall be supplied by the purchaser at the time of the order: g) the type of inspection document (see 8.2). 5.2 Options A number of options are specified in Clause 13. In the event that the purchaser does not indicate his wish to implement any of these options, the supplier shall supply in accordance with the basic specification.
1 ) 1 MPa = 1 N/mm2.
...