EN ISO 13920:1996
(Main)Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:1996)
General Information
- Abstract
Specifies general tolerances for linear and angular dimensions and for shape and position of welded structures in four classes, these being based on customary workshop accuracy. The main criterion for the selection of a particular class should be the functional requirements.
- Status
- Withdrawn
- Publication Date
- 31-Jul-1996
- Withdrawal Date
- 16-Sep-2026
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/SC 4 - Quality management in the field of welding
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 14-Jun-2023
- Completion Date
- 17-Sep-2026
- Directive
- Not Harmonized97/23/EC - Pressure equipment
Buy Documents
EN ISO 13920:1998 ((sl), en)
EN ISO 13920:1998 ((sl), de)
Relations
- Effective Date
- 23-Nov-2022
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Consolidated By
ISO 13920:1996 - Welding — General tolerances for welded constructions — Dimensions for lengths and angles — Shape and position - Effective Date
- 12-Feb-2026
Buy Documents
EN ISO 13920:1998 ((sl), en)
EN ISO 13920:1998 ((sl), de)
Get Certified
Connect with accredited certification bodies for this standard
DVS-ZERT GmbH
German welding certification society.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
EWF/IIW (European/International Welding Federation)
International welding personnel certification.
Sponsored listings
Frequently Asked Questions
EN ISO 13920:1996 is a standard + national annex and/or foreword published by the European Committee for Standardization (CEN). Its full title is "Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:1996)". This standard covers: Specifies general tolerances for linear and angular dimensions and for shape and position of welded structures in four classes, these being based on customary workshop accuracy. The main criterion for the selection of a particular class should be the functional requirements.
Specifies general tolerances for linear and angular dimensions and for shape and position of welded structures in four classes, these being based on customary workshop accuracy. The main criterion for the selection of a particular class should be the functional requirements.
EN ISO 13920:1996 is classified under the following ICS (International Classification for Standards) categories: 25.160.01 - Welding, brazing and soldering in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 13920:1996 has the following relationships with other standards: It is inter standard links to EN ISO 13920:2023, EN 15085-3:2022, EN 13480-4:2024, EN 15085-3:2022+A1:2023, ISO 13920:1996. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 13920:1996 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 13920:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI SIST EN ISO 13920
prva izdaja
STANDARD
maj 1998
Varjenje - Splo{ne tolerance za varjene konstrukcije - Dol`inske in
kotne mere - Oblika in polo`aj (ISO 13920:1996)
(prevzet standard EN ISO 13920:1996 z metodo platnice)
Welding - General tolerances for welded constructions - Dimensions for
lengths and angles - Shape and position (ISO 13920:1996)
Soudage - Tolérances générales relatives aux constructions soudées -
Dimensions des longueurs et angles - Formes et positions
(ISO 13920:1996)
Schweißen - Allgemeintoleranzen für Schweißkonstruktionen - Längen-
und Winkelmaße - Form und Lage (ISO 13920:1996)
Deskriptorji: varjene konstrukcije, merske tolerance
Referen~na {tevilka
ICS 25.160.01 SIST EN ISO 13920:1998 ((sl),de)
Nadaljevanje na straneh II do III in od 1 do 8
© Standard je zalo`il in izdal Urad Republike Slovenije za standardizacijo in meroslovje pri Ministrstvu za znanost in tehnologijo.
Razmno`evanje ali kopiranje celote ali delov tega standarda ni dovoljeno.
SIST EN ISO 13920 : 1998
NACIONALNI UVOD
Standard SIST EN ISO 13920 ((sl),de), Varjenje - Splo{ne tolerance za varjene konstrukcije -
Dol`inske in kotne mere - Oblika in polo`aj (ISO 13920:1996), prva izdaja, 1998, ima status
slovenskega standarda in je z metodo platnice prevzet evropski standard EN ISO 13920 (de),
Schweißen - Allgemeintoleranzen für Schweißkonstruktionen - Längen- und Winkelmaße - Form
und Lage (ISO 13920:1996), 1996-08-00.
NACIONALNI PREDGOVOR
Evropski standard EN ISO 13920:1996 je pripravil tehni~ni odbor Evropskega komiteja za
standardizacijo CEN/TC 121 Varjenje.
Odlo~itev za prevzem tega standarda po metodi platnice je dne 1997-05-14 sprejel tehni~ni
odbor USM/TC VAR Varjenje.
Ta slovenski standard je dne 1998-03-03 odobril direktor USM.
OPOMBI
- Povsod, kjer se v besedilu standarda uporablja izraz “evropski standard”, v
- Nacionalni uvod in nacionalni predgovor nista sestavni del standarda.
II
SIST EN ISO 13920 : 1998
VSEBINA Stran
Predgovor.3
1 Podro~je uporabe.4
2 Zveza s standardi.4
3 Definicije.
...
SLOVENSKI SIST EN ISO 13920
prva izdaja
STANDARD
maj 1998
Varjenje - Splo{ne tolerance za varjene konstrukcije - Dol`inske in
kotne mere - Oblika in polo`aj (ISO 13920:1996)
(prevzet standard EN ISO 13920:1996 z metodo platnice)
Welding - General tolerances for welded constructions - Dimensions for
lengths and angles - Shape and position (ISO 13920:1996)
Soudage - Tolérances générales relatives aux constructions soudées -
Dimensions des longueurs et angles - Formes et positions
(ISO 13920:1996)
Schweißen - Allgemeintoleranzen für Schweißkonstruktionen - Längen-
und Winkelmaße - Form und Lage (ISO 13920:1996)
Deskriptorji: varjene konstrukcije, merske tolerance
Referen~na {tevilka
ICS 25.160.01 SIST EN ISO 13920:1998 ((sl),de)
Nadaljevanje na straneh II do III in od 1 do 8
© Standard je zalo`il in izdal Urad Republike Slovenije za standardizacijo in meroslovje pri Ministrstvu za znanost in tehnologijo.
Razmno`evanje ali kopiranje celote ali delov tega standarda ni dovoljeno.
SIST EN ISO 13920 : 1998
NACIONALNI UVOD
Standard SIST EN ISO 13920 ((sl),de), Varjenje - Splo{ne tolerance za varjene konstrukcije -
Dol`inske in kotne mere - Oblika in polo`aj (ISO 13920:1996), prva izdaja, 1998, ima status
slovenskega standarda in je z metodo platnice prevzet evropski standard EN ISO 13920 (de),
Schweißen - Allgemeintoleranzen für Schweißkonstruktionen - Längen- und Winkelmaße - Form
und Lage (ISO 13920:1996), 1996-08-00.
NACIONALNI PREDGOVOR
Evropski standard EN ISO 13920:1996 je pripravil tehni~ni odbor Evropskega komiteja za
standardizacijo CEN/TC 121 Varjenje.
Odlo~itev za prevzem tega standarda po metodi platnice je dne 1997-05-14 sprejel tehni~ni
odbor USM/TC VAR Varjenje.
Ta slovenski standard je dne 1998-03-03 odobril direktor USM.
OPOMBI
- Povsod, kjer se v besedilu standarda uporablja izraz “evropski standard”, v
- Nacionalni uvod in nacionalni predgovor nista sestavni del standarda.
II
SIST EN ISO 13920 : 1998
VSEBINA Stran
Predgovor.3
1 Podro~je uporabe.4
2 Zveza s standardi.4
3 Definicije.
...