EN 12117:1997
(Main)Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships
General Information
- Abstract
This standard specifies a method for determining the flow rate/pressure drop relationship of components for plastics piping when tested using air at 25 mbar.It is applicable to mechanical fittings, valves, tapping tees and other ancil- laries intended to be used in polyethylene (PE) piping systems for supply of gaseous fuels. The data obtained may be used to calculate the flow of such gases for a specified pressure drop.
- Status
- Withdrawn
- Publication Date
- 19-Aug-1997
- Withdrawal Date
- 16-Sep-2026
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 25-Mar-2015
- Completion Date
- 17-Sep-2026
- Directive
- Harmonized Standard305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Not Harmonized89/106/EEC - Construction products
Relations
- Effective Date
- 01-Apr-2015
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 12117:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships". This standard covers: This standard specifies a method for determining the flow rate/pressure drop relationship of components for plastics piping when tested using air at 25 mbar.It is applicable to mechanical fittings, valves, tapping tees and other ancil- laries intended to be used in polyethylene (PE) piping systems for supply of gaseous fuels. The data obtained may be used to calculate the flow of such gases for a specified pressure drop.
This standard specifies a method for determining the flow rate/pressure drop relationship of components for plastics piping when tested using air at 25 mbar.It is applicable to mechanical fittings, valves, tapping tees and other ancil- laries intended to be used in polyethylene (PE) piping systems for supply of gaseous fuels. The data obtained may be used to calculate the flow of such gases for a specified pressure drop.
EN 12117:1997 is classified under the following ICS (International Classification for Standards) categories: 23.040.45 - Plastics fittings; 23.060.01 - Valves in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12117:1997 has the following relationships with other standards: It is inter standard links to EN ISO 17778:2015, EN 837-1:1996. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12117:1997 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12117:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoff-Rohrleitungssysteme - Formstücke, Armaturen und Zubehörteile - Bestimmung des Zusammenhanges zwischen Gasdurchfluß und DruckabfallSystemes de canalisations en plastiques - Raccords, robinets et équipements auxiliaires - Détermination du rapport débit gazeux/perte de chargePlastics piping systems - Fittings, valves and ancillaries - Determinati
...