SIST EN 60512-23-2:2010
Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters (IEC 60512-23-2:2010)
Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters (IEC 60512-23-2:2010)
IEC 60512-23-2:2010 when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard method to measure suppression characteristics (insertion loss) introduced by single and multiple circuit radio-frequency filters which are an integral part of a connector.
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 23-2: Prüfungen der Schirmung und Dämpfung - Prüfung 23b: Einfügungsdämpfung von integrierten Filtern (IEC 60512-23-2:2010)
Connecteurs pour équipements électroniques - Essais et mesures - Partie 23-2: Essais d'écrantage et de filtrage - Essai 23b: Caractéristiques de coupure des filtres intégraux (CEI 60512-23-2:2010)
La CEI 60512-23-2:2010 est utilisée pour les essais des connecteurs du domaine d'activité du comité d'études 48, lorsque la spécification particulière l'exige. Elle peut également être utilisée pour des dispositifs similaires lorsqu'une spécification particulière le stipule. L'objet de cette norme document est de définir une méthode normalisée de mesure des caractéristiques de coupure (perte d'insertion) introduites par des filtres simples et multiples aux fréquences radioélectriques, qui font partie intégrante d'un connecteur.
Konektorji za elektronsko opremo - Preskusi in meritve - 23-2. del: Preskusi zaslanjanja in filtriranja - Preskus 23b: Karakteristike dušenja integralnih filtrov (IEC 60512-23-2:2010)
Ta del IEC 60512 se, kadar ga zahteva podrobna specifikacija, uporablja za preskušanje konektorjev v okviru tehničnega odbora 48. Lahko se uporablja tudi za podobne naprave, kadar ga določa podrobna specifikacija. Namen tega standarda je podrobno opisati standardno metodo za merjenje karakteristik dušenja (notranje izgube), ki nastane z enim ali več vodovnimi radio frekvenčnimi filtri, ki so vgrajeni v konektor.
General Information
- Status
- Published
- Publication Date
- 13-Oct-2010
- Technical Committee
- I11 - Imaginarni 11
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 04-Oct-2010
- Due Date
- 09-Dec-2010
- Completion Date
- 14-Oct-2010
Relations
- Effective Date
- 09-Feb-2026
Overview
SIST EN 60512-23-2:2010 is a European standard that specifies methods for testing the suppression characteristics of integral filters in connectors for electronic equipment. Developed by the IEC and adopted by the Slovenian Institute for Standardization (SIST), this standard ensures reliable, repeatable assessment of the effectiveness of single and multiple circuit radio-frequency (RF) filters that are integral parts of connectors. The standard is applicable to connectors covered by IEC Technical Committee 48 but may also be referenced for similar devices as specified in detail specifications.
The main objective is to provide a uniform testing approach for measuring insertion loss - a key suppression characteristic - thereby supporting quality assurance and interoperability in electronic connectors with built-in RF filtering.
Key Topics
- Suppression Characteristics Measurement: Describes standard procedures for quantifying the insertion loss introduced by integral filters within connectors.
- Radio-Frequency Filters Testing: Focuses on both single and multiple circuit RF filters integrated in electronic equipment connectors.
- Test Equipment and Setup: Specifies requirements for preparing the test specimen (such as mounting and fixture details), and references recognized methods (notably CISPR 17) for consistent measurement.
- Application Scope: Although centered on connectors, the methods may extend to other similar components when detailed in a product’s specification.
- Specification Compliance: Identifies critical parameters that must be outlined in detail specifications, including frequency ranges, test currents, impedance, and required insertion loss levels.
Applications
SIST EN 60512-23-2:2010 is widely used in the electronics industry for:
- Connector Quality Assurance: Ensuring compliance with international standards for suppression characteristics, thus supporting robust electromagnetic compatibility (EMC) in electronic assemblies.
- Product Development: Serving as a guideline for manufacturers when designing and validating connectors with integrated RF filters, particularly for applications that demand high levels of noise suppression.
- Procurement and Specification: Allowing purchasers and system designers to reference a uniform measurement standard in contractual documents, facilitating straightforward comparisons and ensuring performance reliability in multi-vendor environments.
- Regulatory and Compliance Testing: Assisting laboratories and certification bodies in conducting standardized tests on electronic equipment connectors, particularly where EMC and RF suppression are critical.
Related Standards
- IEC 60512 Series: This document is part of the IEC 60512 series, which covers various tests and measurements for connectors used in electronic equipment.
- CISPR 17:1981: Specifies methods for measuring suppression characteristics of passive interference filters, referenced for detailed measurement procedures.
- EN 60512-23-2:2010: The European counterpart ensures harmonized application across the EU and member countries.
- Other EMC and Connector Standards: Relevant when specifying connector performance in electronic, telecommunication, and industrial systems.
Summary
SIST EN 60512-23-2:2010 provides a rigorous, standardized method for assessing the suppression (insertion loss) characteristics of integral RF filters in connectors for electronic equipment. Widely adopted across Europe and internationally, this standard enhances quality, interoperability, and EMC compliance for manufacturers, designers, and testing laboratories working with filtered connectors and similar components. For full implementation, referencing this and related standards ensures consistency and reliability in electronic equipment performance.
Frequently Asked Questions
SIST EN 60512-23-2:2010 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters (IEC 60512-23-2:2010)". This standard covers: IEC 60512-23-2:2010 when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard method to measure suppression characteristics (insertion loss) introduced by single and multiple circuit radio-frequency filters which are an integral part of a connector.
IEC 60512-23-2:2010 when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard method to measure suppression characteristics (insertion loss) introduced by single and multiple circuit radio-frequency filters which are an integral part of a connector.
SIST EN 60512-23-2:2010 is classified under the following ICS (International Classification for Standards) categories: 31.220.10 - Plug-and-socket devices. Connectors. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 60512-23-2:2010 has the following relationships with other standards: It is inter standard links to SIST EN ISO 13710:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 60512-23-2:2010 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2010
Konektorji za elektronsko opremo - Preskusi in meritve - 23-2. del: Preskusi
zaslanjanja in filtriranja - Preskus 23b: Karakteristike dušenja integralnih filtrov
(IEC 60512-23-2:2010)
Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening
and filtering tests - Test 23b: Suppression characteristics of integral filters (IEC 60512-23
-2:2010)
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 23-2:
Prüfungen der Schirmung und Dämpfung - Prüfung 23b: Einfügungsdämpfung von
integrierten Filtern (IEC 60512-23-2:2010)
Connecteurs pour équipements électroniques - Essais et mesures - Partie 23-2: Essais
d'écrantage et de filtrage - Essai 23b: Caractéristiques de coupure des filtres intégraux
(CEI 60512-23-2:2010)
Ta slovenski standard je istoveten z: EN 60512-23-2:2010
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60512-23-2
NORME EUROPÉENNE
September 2010
EUROPÄISCHE NORM
ICS 31.220.01
English version
Connectors for electronic equipment -
Tests and measurements -
Part 23-2: Screening and filtering tests -
Test 23b: Suppression characteristics of integral filters
(IEC 60512-23-2:2010)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Essais et mesures - Einrichtungen - Mess- und Prüfverfahren -
Partie 23-2: Essais d'écrantage Teil 23-2: Prüfungen der Schirmung
et de filtrage - und Dämpfung -
Essai 23b: Caractéristiques de coupure Prüfung 23b: Einfügungsdämpfung
des filtres intégraux. von integrierten Filtern
(CEI 60512-23-2:2010) (IEC 60512-23-2:2010)
This European Standard was approved by CENELEC on 2010-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-23-2:2010 E
Foreword
The text of document 48B/2150/FDIS, future edition 1 of IEC 60512-23-2, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60512-23-2 on 2010-09-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2013-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60512-23-2:2010 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60512-23-2:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
CISPR 17 1981 Methods of measurement of the suppression - -
characteristics of passive radio interference
filters and suppression components
IEC 60512-23-2 ®
Edition 1.0 2010-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electronic equipment – Tests and measurements –
Part 23-2: Screening and filtering tests – Test 23b: Suppression characteristics
of integral filters
Connecteurs pour équipements électroniques – Essais et mesures –
Partie 23-2: Essais d’écrantage et de filtrage – Essai 23b: Caractéristiques de
coupure des filtres intégraux
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
E
CODE PRIX
ICS 31.220.01 ISBN 978-2-88910-953-1
– 2 – 60512-23-2 © IEC:2010
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –
Part 23-2: Screening and filtering tests –
Test 23b: Suppression characteristics of inte
...