SIST EN 13920-16:2004
(Main)Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics
Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics
This part of this European Standard specifies characteristics, chemical composition and metal yield of aluminium scrap consisting of skimmings, drosses and spills. It also applies to the metallic obtained by dry processing of drosses and skimmings. Full lots of dross fines with particle size smaller than 0,8 mm, or loft of drosses with a metal yield less than 30% are not within the scope of this Standard.
Aluminium und Aluminiumlegierungen - Schrott - Teil 16: Schrott aus Krätzen, Ausläufern und Gröben
Diese Europäische Norm legt die Anforderungen an die Eigenschaften, die chemische Zusammensetzung und die Metallausbeute von Aluminiumschrott aus Krätzen und Ausläufern fest. Sie gilt auch für Gröbe, die bei der Aufbereitung der Krätze anfällt.
Ganze Lose von Feinanteilen mit einer Partikelgröße unter 0,8 mm oder Lose von Krätzen mit einer Metallausbeute unter 30 % gehören nicht zum Anwendungsbereich dieser Norm.
Aluminium et alliages d'aluminium - Scrap (matieres premieres pour recyclage) - Partie 16: Crasses de fonderie
Cette Norme européenne spécifie les caractéristiques, la composition chimique et le rendement en métal du scrap constitué de crasses de fonderie. Elle spécifie également les fractions métalliques obtenues par traitement à sec des crasses de fonderie.
Cette norme ne traite pas des lots complets de fines de crasses constitués de particules de moins de 0,8 mm ou des lots de crasses présentant un rendement en métal inférieur à 30 %.
Aluminij in aluminijeve zlitine – Odpadni aluminij – 16. del: Livarniški odpadki (žlindra, posnemki, polivki)
General Information
- Status
- Published
- Publication Date
- 31-Dec-2003
- Technical Committee
- INEK - Nonferrous metals
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jan-2004
- Due Date
- 01-Jan-2004
- Completion Date
- 01-Jan-2004
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
SIST EN 13920-16:2004 is a European standard addressing the quality and characteristics of aluminium and aluminium alloy scrap, specifically focusing on materials such as skimmings, drosses, spills, and metallics obtained from dry processing. Developed by the Slovenian Institute for Standardization (SIST) and aligned with EN 13920-16:2003, this standard establishes a uniform approach for the classification, chemical composition, and metal yield of these types of aluminium scrap. Its primary aim is to support the recycling sector by ensuring consistency, reliability, and transparency in scrap quality throughout the supply chain.
Key Topics
- Scope and Applicability
- Identifies types of acceptable aluminium scrap: skimmings, drosses, spills, and metallic fractions from dry processes.
- Excludes dross fines of particle size smaller than 0.8 mm and dross lots with a metal yield below 30%.
- Characteristics and Quality Requirements
- Scrap must be free from moisture, refractories, stones, plastics, wood, and other foreign materials.
- Particles should not exceed 600 mm in any dimension.
- Chemical Composition
- Determined by mutual agreement between supplier and purchaser, fostering flexibility and customization.
- Metal Yield
- Minimum required metal yield is 30%, evaluated as per EN 13920-1 procedures.
- Classification and Non-Conformity
- Emphasizes a structured approach for sampling, testing, classification, and dispute resolution, referencing EN 13920-1 guidelines.
Applications
The implementation of SIST EN 13920-16:2004 benefits a range of industries and stakeholders:
- Metal Recyclers and Smelters
- Ensures efficient sourcing and processing of aluminium scrap, reducing contamination risks and optimizing recovery rates.
- Facilitates clear communication of quality expectations and ordering details between suppliers and purchasers.
- Foundries and Remelters
- Supports the production of high-quality cast aluminium products by standardizing raw material input.
- Sustainability and Environmental Management
- Promotes responsible recycling practices by setting minimum quality thresholds, thus reducing landfill and maximizing resource recovery.
- Quality Assurance Professionals
- Assists in the formulation and audit of procurement specifications, minimizing disputes during material acceptance.
Related Standards
For comprehensive scrap management and aluminium recycling quality, the following related standards should be referenced:
- EN 13920-1:2003 – General requirements, sampling, and tests for aluminium and aluminium alloy scrap.
- prEN 12258-3:2000 – Terms and definitions related to aluminium scrap.
- Other parts of the EN 13920 series, covering various types of aluminium scrap such as:
- Part 2: Unalloyed aluminium scrap
- Part 7: Scrap consisting of castings
- Part 10: Used aluminium beverage cans
- Part 12 & 13: Turnings from single or mixed alloys
These references provide comprehensive guidance for various categories of aluminium scrap and ensure harmonization across the European aluminium recycling industry.
By following SIST EN 13920-16:2004, stakeholders involved in aluminium recycling and remelting operations can improve process efficiency, maintain high product standards, and contribute positively to the circular economy through effective aluminium scrap management.
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
SIST EN 13920-16:2004 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics". This standard covers: This part of this European Standard specifies characteristics, chemical composition and metal yield of aluminium scrap consisting of skimmings, drosses and spills. It also applies to the metallic obtained by dry processing of drosses and skimmings. Full lots of dross fines with particle size smaller than 0,8 mm, or loft of drosses with a metal yield less than 30% are not within the scope of this Standard.
This part of this European Standard specifies characteristics, chemical composition and metal yield of aluminium scrap consisting of skimmings, drosses and spills. It also applies to the metallic obtained by dry processing of drosses and skimmings. Full lots of dross fines with particle size smaller than 0,8 mm, or loft of drosses with a metal yield less than 30% are not within the scope of this Standard.
SIST EN 13920-16:2004 is classified under the following ICS (International Classification for Standards) categories: 13.030.50 - Recycling; 77.120.10 - Aluminium and aluminium alloys. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13920-16:2004 has the following relationships with other standards: It is inter standard links to SIST EN 12258-3:2004, SIST EN 13920-1:2004, SIST EN ISO 18777:2009, SIST EN ISO 17510-1:2009, SIST EN ISO 18779:2005, SIST EN ISO 18778:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 13920-16:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine – Odpadni aluminij – 16. del: Livarniški odpadki (žlindra, posnemki, polivki)Aluminium und Aluminiumlegierungen - Schrott - Teil 16: Schrott aus Krätzen, Ausläufern und GröbenAluminium et alliages d'aluminium - Scrap (matieres premieres pour recyclage) - Partie 16: Crasses de fonderieAluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys13.030.50RecikliranjeRecyclingICS:Ta slovenski standard je istoveten z:EN 13920-16:2003SIST EN 13920-16:2004en01-januar-2004SIST EN 13920-16:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13920-16April 2003ICS 13.030.50; 77.120.10English versionAluminium and aluminium alloys - Scrap - Part 16: Scrapconsisting of skimmings, drosses, spills and metallicsAluminium et alliages d'aluminium - Scrap (matièrespremières pour recyclage) - Partie 16: Crasses de fonderieAluminium und Aluminiumlegierungen - Schrott - Teil 16:Schrott aus Krätzen, Ausläufern und GröbenThis European Standard was approved by CEN on 28 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13920-16:2003 ESIST EN 13920-16:2004
...