SIST EN 3219:2020
(Main)Aerospace series - Heat resisting nickel base alloy (Ni-P100HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm ≤ D ≤ 30 mm
Aerospace series - Heat resisting nickel base alloy (Ni-P100HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm ≤ D ≤ 30 mm
This document specifies the requirements relating to:
Heat resisting nickel base alloy (NI-P100HT)
Cold worked and softened
Bar and wire for continuous forging or extrusion for fasteners
3 mm ≤ D ≤ 30 mm
Luft- und Raumfahrt - Hochwarmfeste Nickellegierung (Ni-P100HT) - Kaltverfestigt und abgeschreckt - Stangen und Drähte zum kontinuierlichen Verformen oder Strangpressen für Verbindungselemente - 3 mm ≤ D ≤ 30 mm
Dieses Dokument legt die Anforderungen an:
Hochwarmfeste Nickellegierung (NI P100HT)
Kaltverfestigt und weichgeglüht
Stange und Draht zum kontinuierlichen Verformen oder Strangpressen für Verbindungselemente
3 mm ≤ D ≤ 30 mm
für Anwendungen in der Luft und Raumfahrt fest.
Série aérospatiale - Alliage résistant à chaud base nickel (Ni-P100HT) - Écroui et adouci - Barre et fil pour le forgeage ou l'extrusion en continu pour fixations - 3 mm ≤ D ≤ 30 mm
Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud base nickel (NI-P100HT) Écroui et adouci Barre et fil pour le forgeage ou l’extrusion en continu pour fixations 3 mm ≤ D ≤ 30 mm
pour applications aérospatiales.
Aeronavtika - Toplotno odporne zlitine na nikljevi osnovi (Ni-P100HT) - Hladno obdelana in popuščana - Palice in žice za kontinuirno kovanje ali iztiskanje vezalnih elementov - 3 mm ≤ D ≤ 30 mm
Ta standard določa zahteve, ki se navezujejo na: toplotno odporne zlitine na nikljevi osnovi (NI-P100HT), hladno obdelana in popuščana, palice in žice za kontinuirano kovanje ali iztiskanje vezalnih elementov 3 mm ≤ D ≤ 30 mm za uporabo v aeronavtiki.
General Information
- Status
- Published
- Publication Date
- 10-Feb-2020
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 23-Jan-2020
- Due Date
- 29-Mar-2020
- Completion Date
- 11-Feb-2020
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
SIST EN 3219:2020 is a European standard developed by the Slovenian Institute for Standardization (SIST) that specifies requirements for heat resisting nickel base alloy (Ni-P100HT) bar and wire, cold worked and softened, intended for the continuous forging or extrusion of aerospace fasteners with diameters between 3 mm and 30 mm. This standard is crucial for ensuring quality, consistency, and performance in the demanding environments typical in the aerospace industry.
Key Topics
- Material Specification: Focuses on Ni-P100HT, a nickel base alloy known for its heat resistance, strength, and durability under high-temperature conditions, making it ideal for aerospace fasteners.
- Product Form: Covers both bar and wire forms suitable for downstream manufacturing processes such as continuous forging or extrusion.
- Dimensions: Applies to products with diameters ranging from 3 mm to 30 mm, addressing a broad range of fastener sizes.
- Mechanical Properties: Requirements for proof stress, tensile strength, elongation, reduction of area, hardness, and heat treatment to ensure material reliability.
- Manufacturing Methods:
- Cold Worked: Ensures increased strength through plastic deformation at ambient temperatures.
- Softened Condition: Defined heat treatments restore ductility while maintaining desired mechanical properties.
- Technical References: The standard references other EN standards for test methods, designation, and properties, ensuring harmonization with existing European aerospace material standards.
Applications
SIST EN 3219:2020 is specifically designed for use in the aerospace sector, where components are subject to extreme operational environments. Its main applications include:
- Production of Fasteners: Such as nuts, bolts, and studs designed for aircraft engines and other critical assemblies exposed to high stresses and temperatures.
- Continuous Forging and Extrusion Processes: The standard's focus on cold worked and softened material ensures that the bars and wires provide optimal performance for these manufacturing techniques, resulting in dependable, high-performance fasteners.
- High-Temperature Applications: Aerospace components manufactured to this standard maintain mechanical integrity and corrosion resistance in elevated temperature environments.
- Quality Assurance and Procurement: Aerospace manufacturers and suppliers use this standard to ensure compliance with recognized benchmarks in material performance, traceability, and uniformity across supplies.
Related Standards
SIST EN 3219:2020 references and aligns with several other key standards in the aerospace materials domain:
- EN 2344: Aerospace series - Round bars, machined in heat resisting alloys - Dimensions
- EN 2369: Aerospace series - Wires, heat resisting alloys - Dimensions
- EN 2600: Aerospace series - Designation of metallic semi-finished products - Rules
- EN 4700-002 & EN 4700-004: Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specifications for bar, section, and wire
- EN 4800-002 & EN 4800-004: Aerospace series - Titanium and titanium alloys - Technical specifications for bar, section, and wire
- EN 4258: General organization of standardization for metallic materials in aerospace
- EN 4500-003: Rules for drafting and presentation of material standards for heat resisting alloys
Practical Value
Adopting SIST EN 3219:2020 ensures that aerospace fastener manufacturers and material suppliers deliver products that consistently meet stringent quality and safety requirements. The standard facilitates:
- Interchangeability of parts and materials across European aerospace programs
- Supply chain confidence through harmonized documentation and material designation
- Regulatory compliance and alignment with broader EN and international aerospace standards
- Enhanced product reliability for critical aerospace applications, reducing risk and lifecycle costs
For aerospace industry stakeholders, this standard is an essential reference for specifying, procuring, and certifying materials used in high-performance fastener manufacturing.
Get Certified
Connect with accredited certification bodies for this standard
BUREAU VERITAS Certification Germany
Bureau Veritas certification in Germany.
Element Materials Technology
Materials testing and product certification.
AQMS Ltd.
AQMS provides ISO certification to SMEs across the UK.
Sponsored listings
Frequently Asked Questions
SIST EN 3219:2020 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Heat resisting nickel base alloy (Ni-P100HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm ≤ D ≤ 30 mm". This standard covers: This document specifies the requirements relating to: Heat resisting nickel base alloy (NI-P100HT) Cold worked and softened Bar and wire for continuous forging or extrusion for fasteners 3 mm ≤ D ≤ 30 mm
This document specifies the requirements relating to: Heat resisting nickel base alloy (NI-P100HT) Cold worked and softened Bar and wire for continuous forging or extrusion for fasteners 3 mm ≤ D ≤ 30 mm
SIST EN 3219:2020 is classified under the following ICS (International Classification for Standards) categories: 49.025.99 - Other materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 3219:2020 has the following relationships with other standards: It is inter standard links to SIST EN 2369:2018, SIST EN 2600:2019, SIST EN 4700-002:2026, SIST EN 4800-002:2025, SIST EN 4800-004:2025, SIST EN 4700-004:2026, SIST EN 2344:2002, SIST EN 7010:2020, SIST EN 2943:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 3219:2020 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2020
Aeronavtika - Toplotno odporne zlitine na nikljevi osnovi (Ni-P100HT) - Hladno
obdelana in popuščana - Palice in žice za kontinuirno kovanje ali iztiskanje
vezalnih elementov - 3 mm ≤ D ≤ 30 mm
Aerospace series - Heat resisting nickel base alloy (Ni-P100HT) - Cold worked and
softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm ≤ D ≤ 30
mm
Luft- und Raumfahrt - Hochwarmfeste Nickellegierung (Ni-P100HT) - Kaltverfestigt und
abgeschreckt - Stangen und Drähte zum kontinuierlichen Verformen oder Strangpressen
für Verbindungselemente - 3 mm ≤ D ≤ 30 mm
Série aérospatiale - Alliage résistant à chaud base nickel (Ni-P100HT) - Écroui et adouci
- Barre et fil pour le forgeage ou l'extrusion en continu pour fixations - 3 mm ≤ D ≤ 30 mm
Ta slovenski standard je istoveten z: EN 3219:2020
ICS:
49.025.99 Drugi materiali Other materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 3219
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2020
EUROPÄISCHE NORM
ICS 49.025.99
English Version
Aerospace series - Heat resisting nickel base alloy (NI-
P100HT) - Cold worked and softened - Bar and wire for
continuous forging or extrusion for fasteners - 3 mm ≤ D ≤
30 mm
Série aérospatiale - Alliage résistant à chaud base Luft- und Raumfahrt - Hochwarmfeste Nickellegierung
nickel (Ni-P100HT) - Écroui et adouci - Barre et fil pour (Ni-P100HT) - Kaltverfestigt und abgeschreckt -
le forgeage ou l'extrusion en continu pour fixations - 3 Stangen und Drähte zum kontinuierlichen Verformen
mm ≤ D ≤ 30 mm oder Strangpressen für Verbindungselemente - 3 mm ≤
D ≤ 30 mm
This European Standard was approved by CEN on 14 January 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3219:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 8
European foreword
This document (EN 3219:2020) has been prepared by the Aerospace and Defence Industries Association of
Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text or by
endorsement, at the latest by July 2020, and conflicting national standards shall be withdrawn at the latest by
July 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedo
...