SIST EN ISO 1833-10:2019
(Main)Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide with certain other fibres (method using dichloromethane) (ISO 1833-10:2019)
Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide with certain other fibres (method using dichloromethane) (ISO 1833-10:2019)
This document specifies a method, using dichloromethane, to determine the mass percentage of triacetate or polylactide, after removal of non-fibrous matter, in textiles made of mixtures of
— triacetate or polylactide
with
— wool or other animal hair, silk, protein, cotton, viscose, cupro, modal,lyocell, polyamide, polyester, acrylic, elastomultiester, polypropylene, elastolefin, melamine, polypropylene/polyamide bicomponent,polyacrylate and glass fibres.
Triacetate fibres which have been partially hydrolysed (i.e. saponification) cease to be completely soluble in the reagent. In such cases, this method is not applicable.
Textilien - Quantitative chemische Analysen - Teil 10: Mischungen aus Triacetat- oder Polylactidfasern mit bestimmten anderen Fasern (Dichlormethan-Verfahren) (ISO 1833-10:2019)
Dieses Dokument legt ein Dichlormethan Verfahren zur Bestimmung des prozentualen Massenanteils an Triacetat oder Polylactid, nach dem Abtrennen der nichtfaserigen Begleitstoffe, in Textilien aus Fasermischungen aus
— Triacetat oder Polylactidfasern
mit
— Wolle oder anderem Tierhaar, Seide, Proteinfasern, Baumwolle, Viskose, Cupro, Modal, Lyocell, Polyamid, Polyester, Polyacryl, Elastomultiester, Polypropylen, Elastolefin, Melamin, Polypropylen/Polyamid Bikomponenten, Polyacrylat und Glasfasern
fest.
Triacetatfasern, die partiell hydrolysiert wurden (d. h. Verseifung), sind in dem Reagenz nicht mehr vollständig löslich. In diesen Fällen ist dieses Verfahren nicht anwendbar.
Textiles - Analyse chimique quantitative - Partie 10: Mélanges de triacétate ou de polylactide avec certaines autres fibres (méthode au dichlorométhane) (ISO 1833-10:2019)
Le présent document spécifie une méthode de détermination, au dichlorométhane, de la masse exprimée en pourcentage de triacétate ou de polylactide, après élimination des matières non fibreuses, dans les textiles composés de mélanges de :
— triacétate ou polylactide ;
avec
— laine ou autres poils animaux, soie, protéines, coton, viscose, cupro, modal, lyocell, polyamide, polyester, acrylique, élastomultiester, polypropylène, élastoléfine, mélamine, bicomposant polypropylène/polyamide, polyacrylate et fibres de verre.
Les fibres de triacétate qui ont été partiellement hydrolysées (c'est-à-dire par saponification) ne sont plus entièrement solubles dans le réactif. Dans ce cas, la présente méthode ne s'applique pas.
Tekstilije - Kvantitativna kemična analiza - 10. del: Mešanica triacetatnih ali polilaktidnih in nekaterih drugih vlaken (metoda z uporabo diklorometana) (ISO 1833-10:2019)
Ta dokument določa metodo z uporabo diklorometana za ugotavljanje masnega odstotka triacetata ali polilaktida po odstranitvi nevlakenske snovi v tekstilijah iz mešanic:
— triacetata ali polilaktida in
— volne ali drugih živalskih vlaken, svile, proteinskih vlaken, bombaža, viskoze, kupro vlaken, modalnih, liocelnih, poliamidnih, poliestrskih, akrilnih, elastomultiestrskih, polipropilenskih, elastolefinskih, melaminskih, dvokomponentnih polipropilenskih/poliamidnih, poliakrilatnih in steklenih vlaken.
Triacetatna vlakna, ki so bila delno hidrolizirana (tj. saponifikacija), niso več popolnoma topna v reagentu. V takih primerih se ta metoda ne uporablja.
General Information
- Status
- Published
- Public Enquiry End Date
- 01-Nov-2018
- Publication Date
- 06-Jun-2019
- Technical Committee
- ITEK - Textile and textile products
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 29-May-2019
- Due Date
- 03-Aug-2019
- Completion Date
- 07-Jun-2019
Buy Documents
Relations
- Effective Date
- 01-Jul-2019
Overview
SIST EN ISO 1833-10:2019 defines a standardized method for the quantitative chemical analysis of textiles containing mixtures of triacetate or polylactide fibers with various other types of fibers. Using dichloromethane as the dissolving agent, this ISO 1833-10 method enables laboratories and textile manufacturers to accurately determine the mass percentage of triacetate or polylactide after the removal of non-fibrous matter. The procedure is vital for compliance verification, research, and product quality assessment in the textile industry.
This standard is maintained by the Slovenian Institute for Standardization (SIST) and is aligned with European and international requirements.
Key Topics
Scope and Relevance: Standard applies to textile blends comprising triacetate or polylactide mixed with a range of natural and synthetic fibers, including:
- Wool or other animal hair
- Silk and other protein fibers
- Cotton, viscose, cupro, modal, lyocell
- Polyamide, polyester, acrylic
- Elastomultiester, polypropylene, elastolefin, melamine
- Polypropylene/polyamide bicomponent, polyacrylate, glass fibers
Chemical Analysis Method:
- The procedure utilizes dichloromethane to selectively dissolve triacetate or polylactide fibers.
- The undissolved residue, representing other fiber types, is subsequently washed, dried, and weighed to deduce the blend composition.
Applicability and Limitations:
- Not suitable if triacetate fibers have been partially hydrolyzed (saponified), as they may not dissolve completely in dichloromethane.
Safety and Compliance:
- Emphasizes strict handling protocols for dichloromethane due to its toxic nature.
- Adheres to best practices for laboratory procedures and textile testing.
Applications
SIST EN ISO 1833-10:2019 is an essential tool for:
Textile Manufacturers:
- Verifying the fiber composition of yarns and fabrics for labeling accuracy and product claims.
- Ensuring consistent yarn and fabric quality across batches, especially in blended products.
Testing Laboratories:
- Conducting reliable quantitative analysis of textile blends for compliance with industry and customer specifications.
- Supporting textile certification and product development processes.
Quality Assurance and Regulatory Compliance:
- Meeting European and global standards for fiber content disclosures.
- Facilitating traceability and transparency within textile supply chains.
R&D and Innovation:
- Enabling the development of new textile blends and optimizing production processes by providing accurate fiber content data.
Related Standards
- ISO 1833-1: General principles of testing - provides fundamental requirements and general procedures for quantitative chemical analysis of textiles.
- ISO 1833 Series: Comprehensive suite of standards detailing methods for quantifying various fiber combinations in textiles.
- EN ISO 1833-10:2019: European adoption of the ISO standard, ensuring harmonization across EU member states.
By implementing SIST EN ISO 1833-10:2019, organizations demonstrate a commitment to scientific accuracy, product quality, and international best practices in textile fiber analysis. For precise fiber identification and quality assurance in blended textiles, adherence to this standard is indispensable.
Buy Documents
Get Certified
Connect with accredited certification bodies for this standard
Control Union Certifications
Global certification for agriculture and sustainability.
ECOCERT
Organic and sustainability certification.
Hohenstein Institut
Textile testing and certification.
Sponsored listings
Frequently Asked Questions
SIST EN ISO 1833-10:2019 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide with certain other fibres (method using dichloromethane) (ISO 1833-10:2019)". This standard covers: This document specifies a method, using dichloromethane, to determine the mass percentage of triacetate or polylactide, after removal of non-fibrous matter, in textiles made of mixtures of — triacetate or polylactide with — wool or other animal hair, silk, protein, cotton, viscose, cupro, modal,lyocell, polyamide, polyester, acrylic, elastomultiester, polypropylene, elastolefin, melamine, polypropylene/polyamide bicomponent,polyacrylate and glass fibres. Triacetate fibres which have been partially hydrolysed (i.e. saponification) cease to be completely soluble in the reagent. In such cases, this method is not applicable.
This document specifies a method, using dichloromethane, to determine the mass percentage of triacetate or polylactide, after removal of non-fibrous matter, in textiles made of mixtures of — triacetate or polylactide with — wool or other animal hair, silk, protein, cotton, viscose, cupro, modal,lyocell, polyamide, polyester, acrylic, elastomultiester, polypropylene, elastolefin, melamine, polypropylene/polyamide bicomponent,polyacrylate and glass fibres. Triacetate fibres which have been partially hydrolysed (i.e. saponification) cease to be completely soluble in the reagent. In such cases, this method is not applicable.
SIST EN ISO 1833-10:2019 is classified under the following ICS (International Classification for Standards) categories: 59.060.20 - Man-made fibres; 71.040.40 - Chemical analysis. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 1833-10:2019 has the following relationships with other standards: It is inter standard links to SIST EN ISO 1833-10:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 1833-10:2019 is associated with the following European legislation: EU Directives/Regulations: 1007/2011; Standardization Mandates: M/532. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN ISO 1833-10:2019 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2019
Nadomešča:
SIST EN ISO 1833-10:2013
Tekstilije - Kvantitativna kemična analiza - 10. del: Mešanica triacetatnih ali
polilaktidnih in nekaterih drugih vlaken (metoda z uporabo diklorometana) (ISO
1833-10:2019)
Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide
with certain other fibres (method using dichloromethane) (ISO 1833-10:2019)
Textilien - Quantitative chemische Analysen - Teil 10: Mischungen aus Triacetat- oder
Polylactidfasern mit bestimmten anderen Fasern (Dichlormethan-Verfahren) (ISO 1833-
10:2019)
Textiles - Analyse chimique quantitative - Partie 10: Mélanges de triacétate ou de
polylactide avec certaines autres fibres (méthode au dichlorométhane) (ISO 1833-
10:2019)
Ta slovenski standard je istoveten z: EN ISO 1833-10:2019
ICS:
59.060.20 Umetna vlakna Man-made fibres
71.040.40 Kemijska analiza Chemical analysis
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 1833-10
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 59.060.01 Supersedes EN ISO 1833-10:2010
English Version
Textiles - Quantitative chemical analysis - Part 10:
Mixtures of triacetate or polylactide with certain other
fibres (method using dichloromethane) (ISO 1833-
10:2019)
Textiles - Analyse chimique quantitative - Partie 10: Textilien - Quantitative chemische Analysen - Teil 10:
Mélanges de triacétate ou de polylactide avec certaines Mischungen aus Triacetat- oder Polylactidfasern mit
autres fibres (méthode au dichlorométhane) (ISO bestimmten anderen Fasern (Dichlormethan-
1833-10:2019) Verfahren) (ISO 1833-10:2019)
This European Standard was approved by CEN on 11 May 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1833-10:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 1833-10:2019) has been prepared by Technical Committee ISO/TC 38
"Textiles" in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2019, and conflicting national standards
shall be withdrawn at the latest by November 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1833-10:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 1833-10:2019 has been approved by CEN as EN ISO 1833-10:2019 without any
modification.
INTERNATIONAL ISO
STANDARD 1833-10
Second edition
2019-04
Textiles — Quantitative chemical
analysis —
Part 10:
Mixtures of triacetate or polylactide
with certain other fibres (method
using dichloromethane)
Textiles — Analyse chimique quantitative —
Partie 10: Mélanges de triacétate ou de polylactide avec certaines
autres fibres (méthode au dichlorométhane)
Reference number
ISO 1833-10:2019(E)
©
ISO 2019
ISO 1833-10:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
ISO 1833-10:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 1
6 Apparatus .
...
SLOVENSKI STANDARD
oSIST prEN ISO 1833-10:2018
01-oktober-2018
7HNVWLOLMH.YDQWLWDWLYQDNHPLþQDDQDOL]DGHO 0HãDQLFDWULDFHWDWQLKDOL
SROLODNWLGQLKLQQHNDWHULKGUXJLKYODNHQ PHWRGD]XSRUDERGLNORURPHWDQD
,62',6
Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide
with certain other fibres (method using dichloromethane) (ISO/DIS 1833-10:2018)
Textilien - Quantitative chemische Analysen - Teil 10: Mischungen aus Triacetat- oder
Polylactidfasern mit bestimmten anderen Fasern (Dichlormethan-Verfahren) (ISO/DIS
1833-10:2018)
Textiles - Analyse chimique quantitative - Partie 10: Mélanges de triacétate ou de
polylactide avec certaines autres fibres (méthode au dichlorométhane) (ISO/DIS 1833-
10:2018)
Ta slovenski standard je istoveten z: prEN ISO 1833-10
ICS:
59.060.20 Umetna vlakna Man-made fibres
oSIST prEN ISO 1833-10:2018 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN ISO 1833-10:2018
oSIST prEN ISO 1833-10:2018
ENTWURF
EUROPÄISCHE NORM
prEN ISO 1833-10
EUROPEAN STANDARD
NORME EUROPÉENNE
Juni 2018
ICS 59.060.01 Vorgesehen als Ersatz für EN ISO 1833-10:2010
Deutsche Fassung
Textilien - Quantitative chemische Analysen - Teil 10:
Mischungen aus Triacetat- oder Polylactidfasern mit
bestimmten anderen Fasern (Dichlormethan-Verfahren)
(ISO/DIS 1833-10:2018)
Textiles - Quantitative chemical analysis - Part 10: Textiles - Analyse chimique quantitative - Partie 10:
Mixtures of triacetate or polylactide with certain other Mélanges de triacétate ou de polylactide avec certaines
fibres (method using dichloromethane) (ISO/DIS 1833- autres fibres (méthode au dichlorométhane) (ISO/DIS
10:2018) 1833-10:2018)
Dieser Europäische Norm-Entwurf wird den CEN-Mitgliedern zur parallelen Umfrage vorgelegt. Er wurde vom Technischen
Komitee CEN/TC 248 erstellt.
Wenn aus diesem Norm-Entwurf eine Europäische Norm wird, sind die CEN-Mitglieder gehalten, die CEN-Geschäftsordnung zu
erfüllen, in der die Bedingungen festgelegt sind, unter denen dieser Europäischen Norm ohne jede Änderung der Status einer
nationalen Norm zu geben ist.
Dieser Europäische Norm-Entwurf wurde von CEN in drei offiziellen Fassungen (Deutsch, Englisch, Französisch) erstellt. Eine
Fassung in einer anderen Sprache, die von einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine
Landessprache gemacht und dem CEN-CENELEC-Management-Zentrum mitgeteilt worden ist, hat den gleichen Status wie die
offiziellen Fassungen.
CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Bulgarien, Dänemark, Deutschland, der ehemaligen
jugoslawischen Republik Mazedonien, Estland, Finnland, Frankreich, Griechenland, Irland, Island, Italien, Kroatien, Lettland,
Litauen, Luxemburg, Malta, den Niederlanden, Norwegen, Österreich, Polen, Portugal, Rumänien, Schweden, der Schweiz,
Serbien, der Slowakei, Slowenien, Spanien, der Tschechischen Republik, der Türkei, Ungarn, dem Vereinigten Königreich und
Zypern.
Die Empfänger dieses Norm-Entwurfs werden gebeten, mit ihren Kommentaren jegliche relevante Patentrechte, die sie kennen,
mitzuteilen und unterstützende Dokumentationen zur Verfügung zu stellen.
Warnvermerk : Dieses Schriftstück hat noch nicht den Status einer Europäischen Norm. Es wird zur Prüfung und Stellungnahme
vorgelegt. Es kann sich noch ohne Ankündigung ändern und darf nicht als Europäischen Norm in Bezug genommen werden.
EUROPÄISCHES KOMITEE FÜR NORMUNG
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
CEN-CENELEC Management-Zentrum: Rue de la Science 23, B-1040 Brüssel
© 2018 CEN Alle Rechte der Verwertung, gleich in welcher Form und in welchem Ref. Nr. prEN ISO 1833-10:2018 D
Verfahren, sind weltweit den nationalen Mitgliedern von CEN
vorbehalten.
oSIST prEN ISO 1833-10:2018
prEN ISO 1833-10:2018 (D)
Inhalt
Seite
Europäisches Vorwort . 3
Vorwort . 4
1 Anwendungsbereich . 5
2 Normative Verweisungen . 5
3 Kurzbeschreibung . 5
4 Reagenzien . 5
4.1 Dichlormethan . 5
5 Prüfgeräte . 5
6 Durchführung . 6
7 Berechnung und Auswertung . 6
8 Präzision . 6
oSIST prEN ISO 1833-10:2018
prEN ISO 1833-10:2018 (D)
Europäisches Vorwort
Dieses Dokument (prEN ISO 1833-10:2018) wurde vom Technischen Komitee ISO/TC 38 „Textiles“ in
Zusammenarbeit mit dem Technischen Komitee CEN/TC 248 „Textilien und textile Erzeugnisse“ erarbeitet,
dessen Sekretariat von BSI gehalten wird.
Dieses Dokument ist derzeit zur parallelen Umfrage vorgelegt.
Dieses Dokument wird EN ISO 1833-10:2010 ersetzen.
Anerkennungsnotiz
Der Text von ISO/DIS 1833-10:2018 wurde von CEN als prEN ISO 1833-10:2018 ohne irgendeine
Abänderung genehmigt.
oSIST prEN ISO 1833-10:2018
prEN ISO 1833-10:2018 (D)
Vorwort
ISO (die Internationale Organisation für Normung) ist eine weltweite Vereinigung nationaler
Normungsorganisationen (ISO-Mitgliedsorganisationen). Die Erstellung von International
...