SIST EN IEC 60384-1-1:2022

SLOVENSKI STANDARD
01-november-2022
Nespremenljivi kondenzatorji za elektronsko opremo - 1-1. del: Splošna okvirna
podrobna specifikacija (IEC 60384-1-1:2022)
Fixed capacitors for use in electronic equipment - Part 1-1 : Generic blank detail
specification (IEC 60384-1-1:2022)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 1-1: Allgemeiner
Vordruck für Bauartspezifikation (IEC 60384-1-1:2022)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 1-1:
Spécification particulière-cadre générique (IEC 60384-1-1:2022)
Ta slovenski standard je istoveten z: EN IEC 60384-1-1:2022
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60384-1-1

NORME EUROPÉENNE
EUROPÄISCHE NORM September 2022
ICS 31.060.10
English Version
Fixed capacitors for use in electronic equipment - Part 1-1:
Generic blank detail specification
(IEC 60384-1-1:2022)
Condensateurs fixes utilisés dans les équipements Festkondensatoren zur Verwendung in Geräten der
électroniques - Partie 1-1: Spécification particulière-cadre Elektronik - Teil 1-1: Allgemeiner Vordruck für
générique Bauartspezifikation
(IEC 60384-1-1:2022) (IEC 60384-1-1:2022)
This European Standard was approved by CENELEC on 2022-08-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60384-1-1:2022 E

European foreword
The text of document 40/2951/FDIS, future edition 1 of IEC 60384-1-1, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN IEC 60384-1-1:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-05-24
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-08-24
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60384-1-1:2022 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60027 series NOTE Harmonized as EN 60027 series
IEC 60286 series NOTE Harmonized as EN 60286 series
IEC 61760-1 NOTE Harmonized as EN IEC 61760-1
ISO 80000 series NOTE Harmonized as EN ISO 80000 series
ISO 80000-1 NOTE Harmonized as EN ISO 80000-1
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60062 - Marking codes for resistors and capacitors EN 60062 -
IEC 60384-1 2021 Fixed capacitors for use in electronic EN IEC 60384-1 2021
equipment - Part 1: Generic specification
IEC 60384-X XXXX [Related sectional specification] EN 60384-X XXXX
IEC 61193-2 - Quality assessment systems - Part 2: EN 61193-2 -
Selection and use of sampling plans for
inspection of electronic components and
packages
IEC 61760-2 - Surface mounting technology - Part 2: EN IEC 61760-2 -
Transportation and storage conditions of
surface mounting devices (SMD) - Application
guide
IEC 62090 - Product package labels for electronic EN 62090 -
components using bar code and two
dimensional symbologies
IEC 60384-1-1 ®
Edition 1.0 2022-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Fixed capacitors for use in electronic equipment –

Part 1-1: Generic blank detail specification

Condensateurs fixes utilisés dans les équipements électroniques –

Partie 1-1: Spécification particulière-cadre générique

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.060.10 ISBN 978-2-8322-4031-1

– 2 – IEC 60384-1-1:2022 © IEC 2022
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 9
4 Ratings and characteristics . 10
4.1 General . 10
4.2 Dimensions . 10
4.3 Climatic category and ratings . 11
4.4 Capacitance range, tolerances and rated voltage . 11
5 Tests, test severities and performance requirements . 12
5.1 General . 12
5.2 Visual inspection and check of dimensions . 12
5.3 Electrical tests and measurements . 12
5.4 Robustness of terminations . 12
5.5 Tests related to component assembly . 12
5.6 Rapid change of temperature . 12
5.7 Vibration . 12
5.8 Shock . 12
5.9 Climatic sequence. 12
5.10 Damp heat, steady state . 12
5.11 Endurance . 13
5.12 Further tests related to specific component technology (if applicable) . 13
5.13 Tests related to safety (if applicable) . 13
6 Marking, packaging and ordering information . 13
6.1 Marking . 13
6.1.1 Marking of the component. 13
6.1.2 Marking of the packaging . 13
6.2 Packaging . 13
6.3 Ordering information . 13
7 Additional information . 13
7.1 General . 13
7.2 Storage and transportation . 13
7.3 Substrate for assembly . 14
7.4 Soldering process . 14
7.5 Use of cleaning agents or solvents . 14
7.6 Coating or potting after assembly . 14
8 Quality assessment procedures . 14
8.1 General . 14
8.1.1 100 % test . 14
8.1.2 Certificate of conformity (CoC) . 15
8.1.3 Certified test records of released lots . 15
8.2 Qualification approval . 15
8.3 Maintenance of a qualification approval . 15
8.3.1 Quality conformance inspection . 15
8.3.2 Non-conforming item . 15

IEC 60384-1-1:2022 © IEC 2022 – 3 –
Annex A (normative) Symbols and abbreviated terms . 19
A.1 Symbols . 19
A.2 Abbreviated terms . 19
Annex B (normative) Reference for visual inspection . 20
Bibliography . 21

Figure 1 – Outline and dimensions . 10

Table 1 – Case size and dimensions . 10
Table 2 – Climatic categories . 11
Table 3 – Ratings. 11
Table 4 – Temperature coefficients, tolerances and capacitance ranges for climatic
category … / … / … . 11
Table 5 – Test schedule for a qualification approval . 16
Table 6 – Test schedule for quality conformance inspection . 17

– 4 – IEC 60384-1-1:2022 © IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 1-1: Generic blank detail specification

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 60384-1-1 has been prepared by technical committee 40: Capacitors and resistors for
electronic equipment. It is an International Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
40/2951/FDIS 40/2964/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.

IEC 60384-1-1:2022 © IEC 2022 – 5 –
A list of all parts in the IEC 60384 series, published under the general title Fixed capacitors for
use in electronic equipment, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates that it
contains colours which are considered to be useful for the correct understanding of its
contents. Users should therefore print this document using a colour printer.

– 6 – IEC 60384-1-1:2022 © IEC 2022
INTRODUCTION
This introduction is not intended to be copied into the drafted detail specification. Therefore, it
is positioned in front of the conventional document structure and clause numbering range. It
nevertheless contains normative requirements to the drafted detail specification.
Scope of this generic blank detail specification
This part of IEC 60384-1 is applicable to the drafting of detail specifications for fixed capacitors
for use in electronic equipment.
Function of this generic blank detail specification
This generic blank detail specification is a supplementary document to the sectional
specifications and contains requirements for style, layout and minimum contents of detail
specifications. Detail specifications not complying with these requirements shall not be
considered as being in accordance with IEC specifications nor shall they be described as such.
The detail specification should contain a table of contents prior to the first page of the actual
specification.
In the preparation of the detail specification, the relevant content of the related sectional
specification IEC 60384-X shall be taken into account.
Units, graphical symbols and letter symbols should be chosen, wherever possible, from the
various parts of the IEC 60027 series, the ISO 80000 series and ISO/IEC Guide 99.
This blank detail specification uses for its purpose two different kinds of notes:
For notes which give additional information intended to assist the understanding or use of the
resulting document and therefore shall be copied as NOTE into the drafted detail specification.
As outlined in the ISO/IEC directives, these notes shall not contain any requirement, instruction,
recommendation or permission.
For instructions to the specification writer, COMMENTS are used instead of NOTES. For a clear
distinction, these comments are formatted as IEC-
...