SIST EN 301 908-13 V11.1.1:2016

HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU;
Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA)
User Equipment (UE)
2 ETSI EN 301 908-13 V11.1.1 (2016-07)

Reference
REN/MSG-TFES-11-13-RED
Keywords
3G, 3GPP, cellular, digital, E-UTRA, IMT, LTE,
LTE-Advanced, mobile, radio, regulation, UMTS

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 301 908-13 V11.1.1 (2016-07)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
Introduction . 8
1 Scope . 9
2 References . 11
2.1 Normative references . 11
2.2 Informative references . 11
3 Definitions, symbols and abbreviations . 12
3.1 Definitions . 12
3.2 Symbols . 15
3.3 Abbreviations . 16
4 Technical requirements specifications . 18
4.1 Environmental profile . 18
4.2 Conformance requirements . 18
4.2.0 General . 18
4.2.1 Introduction. 18
4.2.2 Transmitter Maximum Output Power . 19
4.2.2.1 Transmitter maximum output power for Single Carrier . 19
4.2.2.1.1 Definition. 19
4.2.2.1.2 Limits . 19
4.2.2.1.3 Conformance . 19
4.2.2.2 Transmitter output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 19
4.2.2.2.1 Definition. 19
4.2.2.2.2 Limits . 20
4.2.2.2.3 Conformance . 20
4.2.2.3 Transmitter output power for UL-MIMO . 20
4.2.2.3.1 Definition. 20
4.2.2.3.2 Limits . 21
4.2.2.3.3 Conformance . 21
4.2.3 Transmitter Spectrum Emission Mask . 21
4.2.3.1 Transmitter spectrum emission mask for Single Carrier . 21
4.2.3.1.1 Definition. 21
4.2.3.1.2 Limits . 21
4.2.3.1.3 Conformance . 23
4.2.3.2 Transmitter spectrum emission mask for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 23
4.2.3.2.1 Definition. 23
4.2.3.2.2 Limits . 23
4.2.3.2.3 Conformance . 24
4.2.3.3 Transmitter spectrum emission mask for UL-MIMO . 24
4.2.3.3.1 Definition. 24
4.2.3.3.2 Limits . 24
4.2.3.3.3 Conformance . 24
4.2.3.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier . 24
4.2.3.4.1 Definition. 24
4.2.3.4.2 Limits . 25
4.2.3.4.3 Conformance . 25
4.2.4 Transmitter Spurious Emissions . 25
4.2.4.1 Transmitter spurious emissions for Single Carrier . 25
4.2.4.1.1 Definition. 25
4.2.4.1.2 Limits . 25
4.2.4.1.3 Conformance . 28
ETSI
4 ETSI EN 301 908-13 V11.1.1 (2016-07)
4.2.4.2 Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL
CA) . 28
4.2.4.2.1 Definition. 28
4.2.4.2.2 Limits . 28
4.2.4.2.3 Conformance . 30
4.2.4.3 Transmitter spurious emissions for UL-MIMO . 31
4.2.4.3.1 Definition. 31
4.2.4.3.2 Limits . 31
4.2.4.3.3 Conformance . 31
4.2.4.4 Transmitter spurious emissions for Multi-Cluster PUSCH within a component carrier . 31
4.2.4.4.1 Definition. 31
4.2.4.4.2 Limits . 31
4.2.4.4.3 Conformance . 31
4.2.5 Transmitter Minimum Output Power . 31
4.2.5.1 Transmitter minimum output power for Single Carrier. 31
4.2.5.1.1 Definition. 31
4.2.5.1.2 Limits . 32
4.2.5.1.3 Conformance . 32
4.2.5.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 32
4.2.5.2.1 Definition. 32
4.2.5.2.2 Limits . 32
4.2.5.2.3 Conformance . 32
4.2.5.3 Transmitter minimum output power for UL-MIMO . 32
4.2.5.3.1 Definition. 32
4.2.5.3.2 Limits . 33
4.2.5.3.3 Conformance . 33
4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 33
4.2.6.1 Receiver Adjacent Channel Selectivity (ACS) for Single Carrier . 33
4.2.6.1.1 Definition. 33
4.2.6.1.2 Limits . 33
4.2.6.1.3 Conformance . 34
4.2.6.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands . 34
4.2.6.2.1 Definition. 34
4.2.6.2.2 Limits . 34
4.2.6.2.3 Conformance . 34
4.2.7 Receiver Blocking Characteristics . 35
4.2.7.1 Receiver Blocking Characteristics for Single Carrier . 35
4.2.7.1.1 Definition. 35
4.2.7.1.2 Limits . 35
4.2.7.1.3 Conformance . 36
4.2.7.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only bands . 37
4.2.7.2.1 Definition. 37
4.2.7.2.2 Limits . 37
4.2.7.2.3 Conformance . 38
4.2.8 Receiver Spurious Response . 38
4.2.8.1 Receiver Spurious Response for Single Carrier . 38
4.2.8.1.1 Definition. 38
4.2.8.1.2 Limits . 38
4.2.8.1.3 Conformance . 39
4.2.8.2 Receiver Spurious Response for Carrier Aggregation in DL-only bands . 39
4.2.8.2.1 Definition. 39
4.2.8.2.2 Limits . 39
4.2.8.2.3 Conformance . 39
4.2.9 Receiver Intermodulation Characteristics . 39
4.2.9.1 Receiver Intermodulation Characteristics for Single Carrier . 39
4.2.9.1.1 Definition. 39
4.2.9.1.2 Limits . 39
4.2.9.1.3 Conformance . 40
4.2.9.2 Receiver Intermodulation Characteristics for Carrier Aggregation in DL-only bands . 40
4.2.9.2.1 Definition. 40
4.2.9.2.2 Limits . 40
ETSI
5 ETSI EN 301 908-13 V11.1.1 (2016-07)
4.2.9.2.3 Conformance . 40
4.2.10 Receiver Spurious Emissions . 40
4.2.10.1 Receiver Spurious Emissions for Single Carrier . 40
4.2.10.1.1 Definition. 40
4.2.10.1.2 Limits . 41
4.2.10.1.3 Conformance . 41
4.2.10.2 Receiver Spurious Emissions in DL-only bands . 41
4.2.10.2.1 Definition. 41
4.2.10.2.2 Limits . 41
4.2.10.2.3 Conformance . 41
4.2.11 Transmitter Adjacent Channel Leakage Power Ratio . 41
4.2.11.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 41
4.2.11.1.1 Definition. 41
4.2.11.1.2 Limits . 42
4.2.11.1.3 Conformance . 42
4.2.11.2 Transmitter adjacent channel leakage power ratio for intra-band contiguous Carrier Aggregation
(DL CA and UL CA). 43
4.2.11.2.1 Definition. 43
4.2.11.2.2 Limits . 43
4.2.11.2.3 Conformance . 44
4.2.11.3 Transmitter adjacent channel leakage power ratio for UL-MIMO . 44
4.2.11.3.1 Definition. 44
4.2.11.3.2 Limits . 44
4.2.11.3.3 Conformance . 45
4.2.11.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component
carrier . 45
4.2.11.4.1 Definition. 45
4.2.11.4.2 Limits . 45
4.2.11.4.3 Conformance . 45
4.2.12 Receiver Reference Sensitivity Level . 46
4.2.12.0 General . 46
4.2.12.1 Receiver Reference Sensitivity Level for Single Carrier . 46
4.2.12.1.1 Definition. 46
4.2.12.1.2 Limits . 46
4.2.12.1.3 Conformance . 46
5 Testing for compliance with technical requirements . 47
5.1 Environmental conditions for testing . 47
5.2 Interpretation of the measurement results . 47
5.3 Essential radio test suites . 48
5.3.0 General . 48
5.3.1 Transmitter Maximum Output Power . 48
5.3.1.1 Transmitter maximum output power for Single Carrier . 48
5.3.1.1.1 Method of test . 48
5.3.1.1.2 Test requirements . 49
5.3.1.2 Transmitter maximum output power for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 49
5.3.1.2.1 Method of test . 49
5.3.1.2.2 Test requirements . 50
5.3.1.3 Transmitter maximum output power for UL-MIMO . 50
5.3.1.3.1 Method of test . 50
5.3.1.3.2 Test requirements . 50
5.3.2 Transmitter Spectrum Emission Mask . 51
5.3.2.1 Transmitter spectrum emission mask for Single Carrier . 51
5.3.2.1.1 Method of test . 51
5.3.2.1.2 Test requirements . 51
5.3.2.2 Transmitter spectrum emission mask for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 52
5.3.2.2.1 Method of test . 52
5.3.2.2.2 Test requirements . 52
5.3.2.3 Transmitter spectrum emission mask for UL-MIMO . 53
5.3.2.3.1 Method of test . 53
ETSI
6 ETSI EN 301 908-13 V11.1.1 (2016-07)
5.3.2.3.2 Test requirements . 53
5.3.2.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier . 53
5.3.2.4.1 Method of test . 53
5.3.2.4.2 Test requirements . 54
5.3.3 Transmitter Spurious Emissions . 54
5.3.3.1 Transmitter spurious emissions for Single Carrier . 54
5.3.3.1.1 Method of test . 54
5.3.3.1.2 Test requirements . 55
5.3.3.2 Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL
CA) . 55
5.3.3.2.1 Method of test . 55
5.3.3.2.2 Test requirements . 56
5.3.3.3 Transmitter spurious emissions for UL-MIMO . 56
5.3.3.3.1 Method of test . 56
5.3.3.3.2 Test requirements . 57
5.3.3.4 Transmitter spurious emissions for Multi-Cluster PUSCH within a component carrier . 57
5.3.3.4.1 Method of test . 57
5.3.3.4.2 Test requirements . 58
5.3.4 Transmitter Minimum Output Power . 58
5.3.4.1 Transmitter minimum output power for Single Carrier. 58
5.3.4.1.1 Method of test . 58
5.3.4.1.2 Test requirements . 59
5.3.4.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 59
5.3.4.2.1 Method of test . 59
5.3.4.2.2 Test requirements . 59
5.3.4.3 Transmitter minimum output power for UL-MIMO . 60
5.3.4.3.1 Method of test . 60
5.3.4.3.2 Test requirements . 60
5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 60
5.3.5.1 Receiver Adjacent Channel Selectivity (ACS) for Single Carrier . 60
5.3.5.1.1 Method of test . 60
5.3.5.1.2 Test requirements . 61
5.3.5.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands . 62
5.3.5.2.1 Method of test . 62
5.3.5.2.2 Test requirements . 63
5.3.6 Receiver Blocking Characteristics . 63
5.3.6.1 Receiver Blocking Characteristics for Single Carrier . 63
5.3.6.1.1 Method of test . 63
5.3.6.1.2 Test requirements . 65
5.3.6.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only bands . 65
5.3.6.2.1 Method of test . 65
5.3.6.2.2 Test requirements . 67
5.3.7 Receiver Spurious Response . 67
5.3.7.1 Receiver Spurious Response for Single Carrier . 67
5.3.7.1.1 Method of test . 67
5.3.7.1.2 Test requirements . 68
5.3.7.2 Receiver Spurious Response for Carrier Aggregation in DL-only bands . 68
5.3.7.2.1 Method of test . 68
5.3.7.2.2 Test requirements . 68
5.3.8 Receiver Intermodulation Characteristics . 68
5.3.8.1 Receiver Intermodulation Characteristics for Single Carrier . 68
5.3.8.1.1 Method of test . 68
5.3.8.1.2 Test requirements . 69
5.3.8.2 Receiver Intermodulation Characteristics for Carrier Aggregation in DL-only bands . 69
5.3.8.2.1 Method of test . 69
5.3.8.2.2 Test requirements . 70
5.3.9 Receiver Spurious Emissions . 70
5.3.9.1 Receiver Spurious Emissions for Single Carrier . 70
5.3.9.1.1 Method of test . 70
5.3.9.1.2 Test requirements . 71
5.3.9.2 Receiver Spurious Emissions in DL-only bands . 71
ETSI
7 ETSI EN 301 908-13 V11.1.1 (2016-07)
5.3.9.2.1 Method of test . 71
5.3.9.2.2 Test requirements . 72
5.3.10 Transmitter Adjacent Channel Leakage Power Ratio . 72
5.3.10.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 72
5.3.10.1.1 Method of test . 72
5.3.10.1.2 Test requirements . 73
5.3.10.2 Transmitter adjacent channel leakage power ratio for intra-band contiguous Carrier Aggregation
(DL CA and UL CA). 73
5.3.10.2.1 Method of test . 73
5.3.10.2.2 Test requirements . 74
5.3.10.3 Transmitter adjacent channel leakage power ratio for UL-MIMO . 74
5.3.10.3.1 Method of test . 74
5.3.10.3.2 Test requirements . 75
5.3.10.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component
carrier . 75
5.3.10.4.1 Method of test . 75
5.3.10.4.2 Test requirements . 76
5.3.11 Receiver Reference Sensitivity Level . 76
5.3.11.1 Receiver Reference Sensitivity Level for Single Carrier . 76
5.3.11.1.1 Method of test . 76
5.3.11.1.2 Test requirements . 77
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 78
Annex B (normative): Environmental profile . 79
B.1 General . 79
B.1.1 Introduction . 79
B.1.2 Temperature . 79
B.1.3 Voltage . 79
B.1.4 Test environment . 80
Annex C (informative): Bibliography . 81
History . 82

ETSI
8 ETSI EN 301 908-13 V11.1.1 (2016-07)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonised Europ
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.IMT cellular networks - Harmonised Standard covering the essential requirements of article 3.2 of the Radio Equipment Directive 2014/53/EU - Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)33.070.99Druge mobilne storitveOther mobile services33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:ETSI EN 301 908-13 V11.1.1 (2016-07)SIST EN 301 908-13 V11.1.1:2016en01-oktober-2016SIST EN 301 908-13 V11.1.1:2016SLOVENSKI
STANDARD
HARMONISED EUROPEAN STANDARD SIST EN 301 908-13 V11.1.1:2016

ETSI ETSI EN 301 908-13 V11.1.1 (2016-07) 2
Reference REN/MSG-TFES-11-13-RED Keywords 3G, 3GPP, cellular, digital, E-UTRA, IMT, LTE, LTE-Advanced, mobile, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 908-13 V11.1.1:2016

ETSI ETSI EN 301 908-13 V11.1.1 (2016-07) 3 Contents Intellectual Property Rights . 8 Foreword . 8 Modal verbs terminology . 8 Introduction . 8 1 Scope . 9 2 References . 11 2.1 Normative references . 11 2.2 Informative references . 11 3 Definitions, symbols and abbreviations . 12 3.1 Definitions . 12 3.2 Symbols . 15 3.3 Abbreviations . 16 4 Technical requirements specifications . 18 4.1 Environmental profile . 18 4.2 Conformance requirements . 18 4.2.0 General . 18 4.2.1 Introduction. 18 4.2.2 Transmitter Maximum Output Power . 19 4.2.2.1 Transmitter maximum output power for Single Carrier . 19 4.2.2.1.1 Definition. 19 4.2.2.1.2 Limits . 19 4.2.2.1.3 Conformance . 19 4.2.2.2 Transmitter output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 19 4.2.2.2.1 Definition. 19 4.2.2.2.2 Limits . 20 4.2.2.2.3 Conformance . 20 4.2.2.3 Transmitter output power for UL-MIMO . 20 4.2.2.3.1 Definition. 20 4.2.2.3.2 Limits . 21 4.2.2.3.3 Conformance . 21 4.2.3 Transmitter Spectrum Emission Mask . 21 4.2.3.1 Transmitter spectrum emission mask for Single Carrier . 21 4.2.3.1.1 Definition. 21 4.2.3.1.2 Limits . 21 4.2.3.1.3 Conformance . 23 4.2.3.2 Transmitter spectrum emission mask for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 23 4.2.3.2.1 Definition. 23 4.2.3.2.2 Limits . 23 4.2.3.2.3 Conformance . 24 4.2.3.3 Transmitter spectrum emission mask for UL-MIMO . 24 4.2.3.3.1 Definition. 24 4.2.3.3.2 Limits . 24 4.2.3.3.3 Conformance . 24 4.2.3.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier . 24 4.2.3.4.1 Definition. 24 4.2.3.4.2 Limits . 25 4.2.3.4.3 Conformance . 25 4.2.4 Transmitter Spurious Emissions . 25 4.2.4.1 Transmitter spurious emissions for Single Carrier . 25 4.2.4.1.1 Definition. 25 4.2.4.1.2 Limits . 25 4.2.4.1.3 Conformance . 28 SIST EN 301 908-13 V11.1.1:2016

ETSI ETSI EN 301 908-13 V11.1.1 (2016-07) 4 4.2.4.2 Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 28 4.2.4.2.1 Definition. 28 4.2.4.2.2 Limits . 28 4.2.4.2.3 Conformance . 30 4.2.4.3 Transmitter spurious emissions for UL-MIMO . 31 4.2.4.3.1 Definition. 31 4.2.4.3.2 Limits . 31 4.2.4.3.3 Conformance . 31 4.2.4.4 Transmitter spurious emissions for Multi-Cluster PUSCH within a component carrier . 31 4.2.4.4.1 Definition. 31 4.2.4.4.2 Limits . 31 4.2.4.4.3 Conformance . 31 4.2.5 Transmitter Minimum Output Power . 31 4.2.5.1 Transmitter minimum output power for Single Carrier. 31 4.2.5.1.1 Definition. 31 4.2.5.1.2 Limits . 32 4.2.5.1.3 Conformance . 32 4.2.5.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 32 4.2.5.2.1 Definition. 32 4.2.5.2.2 Limits . 32 4.2.5.2.3 Conformance . 32 4.2.5.3 Transmitter minimum output power for UL-MIMO . 32 4.2.5.3.1 Definition. 32 4.2.5.3.2 Limits . 33 4.2.5.3.3 Conformance . 33 4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 33 4.2.6.1 Receiver Adjacent Channel Selectivity (ACS) for Single Carrier . 33 4.2.6.1.1 Definition. 33 4.2.6.1.2 Limits . 33 4.2.6.1.3 Conformance . 34 4.2.6.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands . 34 4.2.6.2.1 Definition. 34 4.2.6.2.2 Limits . 34 4.2.6.2.3 Conformance . 34 4.2.7 Receiver Blocking Characteristics . 35 4.2.7.1 Receiver Blocking Characteristics for Single Carrier . 35 4.2.7.1.1 Definition. 35 4.2.7.1.2 Limits . 35 4.2.7.1.3 Conformance . 36 4.2.7.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only bands . 37 4.2.7.2.1 Definition. 37 4.2.7.2.2 Limits . 37 4.2.7.2.3 Conformance . 38 4.2.8 Receiver Spurious Response . 38 4.2.8.1 Receiver Spurious Response for Single Carrier . 38 4.2.8.1.1 Definition. 38 4.2.8.1.2 Limits . 38 4.2.8.1.3 Conformance . 39 4.2.8.2 Receiver Spurious Response for Carrier Aggregation in DL-only bands . 39 4.2.8.2.1 Definition. 39 4.2.8.2.2 Limits . 39 4.2.8.2.3 Conformance . 39 4.2.9 Receiver Intermodulation Characteristics . 39 4.2.9.1 Receiver Intermodulation Characteristics for Single Carrier . 39 4.2.9.1.1 Definition. 39 4.2.9.1.2 Limits . 39 4.2.9.1.3 Conformance . 40 4.2.9.2 Receiver Intermodulation Characteristics for Carrier Aggregation in DL-only bands . 40 4.2.9.2.1 Definition. 40 4.2.9.2.2 Limits . 40 SIST EN 301 908-13 V11.1.1:2016

ETSI ETSI EN 301 908-13 V11.1.1 (2016-07) 5 4.2.9.2.3 Conformance . 40 4.2.10 Receiver Spurious Emissions . 40 4.2.10.1 Receiver Spurious Emissions for Single Carrier . 40 4.2.10.1.1 Definition. 40 4.2.10.1.2 Limits . 41 4.2.10.1.3 Conformance . 41 4.2.10.2 Receiver Spurious Emissions in DL-only bands . 41 4.2.10.2.1 Definition. 41 4.2.10.2.2 Limits . 41 4.2.10.2.3 Conformance . 41 4.2.11 Transmitter Adjacent Channel Leakage Power Ratio . 41 4.2.11.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 41 4.2.11.1.1 Definition. 41 4.2.11.1.2 Limits . 42 4.2.11.1.3 Conformance . 42 4.2.11.2 Transmitter adjacent channel leakage power ratio for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 43 4.2.11.2.1 Definition. 43 4.2.11.2.2 Limits . 43 4.2.11.2.3 Conformance . 44 4.2.11.3 Transmitter adjacent channel leakage power ratio for UL-MIMO . 44 4.2.11.3.1 Definition. 44 4.2.11.3.2 Limits . 44 4.2.11.3.3 Conformance . 45 4.2.11.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component carrier . 45 4.2.11.4.1 Definition. 45 4.2.11.4.2 Limits . 45 4.2.11.4.3 Conformance . 45 4.2.12 Receiver Reference Sensitivity Level . 46 4.2.12.0 General . 46 4.2.12.1 Receiver Reference Sensitivity Level for Single Carrier . 46 4.2.12.1.1 Definition. 46 4.2.12.1.2 Limits . 46 4.2.12.1.3 Conformance . 46 5 Testing for compliance with technical requirements . 47 5.1 Environmental conditions for testing . 47 5.2 Interpretation of the measurement results . 47 5.3 Essential radio test suites . 48 5.3.0 General . 48 5.3.1 Transmitter Maximum Output Power . 48 5.3.1.1 Transmitter maximum output power for Single Carrier . 48 5.3.1.1.1 Method of test . 48 5.3.1.1.2 Test requirements . 49 5.3.1.2 Transmitter maximum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 49 5.3.1.2.1 Method of test . 49 5.3.1.2.2 Test requirements . 50 5.3.1.3 Transmitter maximum output power for UL-MIMO . 50 5.3.1.3.1 Method of test . 50 5.3.1.3.2 Test requirements . 50 5.3.2 Transmitter Spectrum Emission Mask . 51 5.3.2.1 Transmitter spectrum emission mask for Single Carrier . 51 5.3.2.1.1 Method of test . 51 5.3.2.1.2 Test requirements . 51 5.3.2.2 Transmitter spectrum emission mask for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 52 5.3.2.2.1 Method of test . 52 5.3.2.2.2 Test requirements . 52 5.3.2.3 Transmitter spectrum emission mask for UL-MIMO . 53 5.3.2.3.1 Method of test . 53 SIST EN 301 908-13 V11.1.1:2016

ETSI ETSI EN 301 908-13 V11.1.1 (2016-07) 6 5.3.2.3.2 Test requirements . 53 5.3.2.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier . 53 5.3.2.4.1 Method of test . 53 5.3.2.4.2 Test requirements . 54 5.3.3 Transmitter Spurious Emissions . 54 5.3.3.1 Transmitter spurious emissions for Single Carrier . 54 5.3.3.1.1 Method of test . 54 5.3.3.1.2 Test requirements . 55 5.3.3.2 Transmitter spurious emissions for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 55 5.3.3.2.1 Method of test . 55 5.3.3.2.2 Test requirements . 56 5.3.3.3 Transmitter spurious emissions for UL-MIMO . 56 5.3.3.3.1 Method of test . 56 5.3.3.3.2 Test requirements . 57 5.3.3.4 Transmitter spurious emissions for Multi-Cluster PUSCH within a component carrier . 57 5.3.3.4.1 Method of test . 57 5.3.3.4.2 Test requirements . 58 5.3.4 Transmitter Minimum Output Power . 58 5.3.4.1 Transmitter minimum output power for Single Carrier. 58 5.3.4.1.1 Method of test . 58 5.3.4.1.2 Test requirements . 59 5.3.4.2 Transmitter minimum output power for intra-band contiguous Carrier Aggregation (DL CA and UL CA) . 59 5.3.4.2.1 Method of test . 59 5.3.4.2.2 Test requirements . 59 5.3.4.3 Transmitter minimum output power for UL-MIMO . 60 5.3.4.3.1 Method of test . 60 5.3.4.3.2 Test requirements . 60 5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 60 5.3.5.1 Receiver Adjacent Channel Selectivity (ACS) for Single Carrier . 60 5.3.5.1.1 Method of test . 60 5.3.5.1.2 Test requirements . 61 5.3.5.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands . 62 5.3.5.2.1 Method of test . 62 5.3.5.2.2 Test requirements . 63 5.3.6 Receiver Blocking Characteristics . 63 5.3.6.1 Receiver Blocking Characteristics for Single Carrier . 63 5.3.6.1.1 Method of test . 63 5.3.6.1.2 Test requirements . 65 5.3.6.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only bands . 65 5.3.6.2.1 Method of test . 65 5.3.6.2.2 Test requirements . 67 5.3.7 Receiver Spurious Response . 67 5.3.7.1 Receiver Spurious Response for Single Carrier . 67 5.3.7.1.1 Method of test . 67 5.3.7.1.2 Test requirements . 68 5.3.7.2 Receiver Spurious Response for Carrier Aggregation in DL-only bands . 68 5.3.7.2.1 Method of test . 68 5.3.7.2.2 Test requirements . 68 5.3.8 Receiver Intermodulation Characteristics . 68 5.3.8.1 Receiver Intermodulation Characteristics for Single Carrier . 68 5.3.8.1.1 Method of test . 68 5.3.8.1.2 Test requirements . 69 5.3.8.2 Receiver Intermodulation Characteristics for Carrier Aggregation in DL-only bands . 69 5.3.8.2.1 Method of test . 69 5.3.8.2.2 Test requirements . 70 5.3.9 Receiver Spurious Emissions . 70 5.3.9.1 Receiver Spurious Emissions for Single Carrier . 70 5.3.9.1.1 Method of test . 70 5.3.9.1.2 Test requirements . 71 5.3.9.2 Receiver Spurious Emissions in DL-only bands . 71 SIST EN 301 908-13 V11.1.1:2016

ETSI ETSI EN 301 908-13 V11.1.1 (2016-07) 7 5.3.9.2.1 Method of test . 71 5.3.9.2.2 Test requirements . 72 5.3.10 Transmitter Adjacent Channel Leakage Power Ratio . 72 5.3.10.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 72 5.3.10.1.1 Method of test . 72 5.3.10.1.2 Test requirements . 73 5.3.10.2 Transmitter adjacent channel leakage power ratio for intra-band contiguous Carrier Aggregation (DL CA and UL CA). 73 5.3.10.2.1 Method of test . 73 5.3.10.2.2 Test requirements . 74 5.3.10.3 Transmitter adjacent channel leakage power ratio for UL-MIMO . 74 5.3.10.3.1 Method of test . 74 5.3.10.3.2 Test requirements . 75 5.3.10.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component carrier . 75 5.3.10.4.1 Method of test . 75 5.3.10.4.2 Test requirements . 76 5.3.11 Receiver Reference Sensitivity Level . 76 5.3.11.1 Receiver Reference Sensitivity Level for Single Carrier . 76 5.3.11.1.1 Method of test . 76 5.3.11.1.2 Test requirements . 77 Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 78 Annex B (normative): Environmental profile . 79 B.1 General . 79 B.1.1 Introduction . 79 B.1.2 Temperature . 79 B.1.3 Voltage . 79 B.1.4 Test environment . 80 Annex C (informative): Bibliography . 81 History . 82
ETSI ETSI EN 301 908-13 V11.1.1 (2016-07) 8 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000
...