iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60598-2-22:2015/AC:2016

(Corrigendum)

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

TC - update to annex ZA

Leuchten - Teil 2-22: Besondere Anforderungen - Leuchten für Notbeleuchtung

Luminaires - Partie 2-22: Exigences particulières - Luminaires pour éclairage de secours

Svetilke - 2-22. del: Posebne zahteve - Svetilke za zasilno razsvetljavo - Popravek AC

General Information

Status
Withdrawn
Publication Date
11-Oct-2016
Withdrawal Date
03-Jul-2025
ICS
29.140.40 - Luminaires
91.160.10 - Interior lighting
Technical Committee
IESV - Lamps and related equipment
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
04-Jul-2025
Due Date
27-Jul-2025
Completion Date
04-Jul-2025
Directive
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
Ref Project
EN 60598-2-22:2014/AC:2016-09 - Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

Relations

Replaced By
SIST EN IEC 60598-2-22:2022 - Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting (IEC 60598-2-22:2021)
Effective Date
28-Jun-2022
Corrects
SIST EN 60598-2-22:2015 - Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting (IEC 60598-2-22:2014)
Effective Date
26-Jul-2016
EN 60598-2-22:2015/AC:2016EN 60598-2-22:2015/AC:2016
PreviousNext
Corrigendum
EN 60598-2-22:2015/AC:2016
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Svetilke - 2-22. del: Posebne zahteve - Svetilke za zasilno razsvetljavo - Popravek ACLeuchten - Teil 2-22: Besondere Anforderungen - Leuchten für NotbeleuchtungLuminaires - Partie 2-22: Exigences particulières - Luminaires pour éclairage de secoursLuminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting91.160.10Notranja razsvetljavaInterior lighting29.140.40SvetilaLuminaire
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60598-2-22:2022(Amendment)
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting (IEC 60598-2-22:2021)
EN IEC 60598-2-22:2022

This part of IEC 60598 specifies requirements for emergency luminaires for use with electrical lamps on emergency power supplies not exceeding 1 000 V.
This document does not cover the effects of non-emergency voltage reductions on luminaires incorporating high pressure discharge lamps.
This document gives general requirements for emergency lighting equipment.
In this document, the term "lamp" which also includes "light source(s)" where appropriate, is used.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60598-2-22:2022(Amendment)
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting (IEC 60598-2-22:2021)
EN IEC 60598-2-22:2022

This part of IEC 60598 specifies requirements for emergency luminaires for use with electrical lamps on emergency power supplies not exceeding 1 000 V.
This document does not cover the effects of non-emergency voltage reductions on luminaires incorporating high pressure discharge lamps.
This document gives general requirements for emergency lighting equipment.
In this document, the term "lamp" which also includes "light source(s)" where appropriate, is used.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS ISO 5615:2025(Main)
Health informatics - Accelerating safe, effective and secure remote connected care and mobile health through standards-based interoperability solutions addressing gaps revealed by pandemics (ISO/TS 5615:2025)
CEN ISO/TS 5615:2025

This document reviews the structural changes that have been precipitated by the COVID-19 pandemic in Remote Connected Care and Mobile Health (RCC-MH). The impact of the COVID-19 pandemic on care settings such as home and community care, acute care and outpatient care are reviewed discussing how well these healthcare environments were prepared to address the encountered connectivity challenges from a standards point of view. The current standards landscape is reviewed and gaps are identified leading to recommendations for future standards work.

  • Technical specification
    101 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 13582:2025(Main)
Installation of thermal energy meters - Guidelines for the selection, installation and operation of thermal energy meters
CEN/TR 13582:2025

The EN 1434 series of standards provide technical principles and practical advice in selecting, installing and commissioning of thermal energy meters. However, because a standard cannot cover all areas completely, this document assists users of thermal energy meters.

  • Technical report
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15708-3:2025(Main)
Non-destructive testing - Radiation methods for computed tomography - Part 3: Operation and interpretation (ISO 15708-3:2025)
EN ISO 15708-3:2025

This document provides an overview of the operation of a computed tomography (CT) system. This document specifies steps for interpretation of CT results with the aim of providing the operator with technical information to enable selection of suitable parameters.
This document is applicable to industrial imaging (i.e. non-medical applications) and specifies a consistent set of definitions of CT performance parameters, including how these performance parameters relate to CT system specifications.
This document is applicable to computed axial tomography.
This document does not apply to other types of tomography such as translational tomography and tomosynthesis.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60112:2025(Main)
Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2025)
EN IEC 60112:2025

IEC 60112:2025 specifies the method of test for the determination of the proof and comparative tracking indices of solid insulating materials on pieces taken from parts of equipment and on plaques of material using alternating voltage. This document provides a procedure for the determination of erosion when required. The proof tracking index is used as an acceptance criterion as well as a means for the quality control of materials and fabricated parts. The comparative tracking index is mainly used for the basic characterization and comparison of the properties of materials. This test method evaluates the composition of the material as well as the surface of the material being evaluated. Both the composition and surface condition directly influence the results of the evaluation and are considered when using the results in material selection process. The described test method is designed for a test voltage up to 600 V AC, because higher test voltages and DC voltage will lead to a reduced test severity. Test results are not directly suitable for the evaluation of safe creepage distances when designing electrical apparatus. The results of this method have been used for insulation coordination of equipment. It is important that use of these results also considers the overvoltage levels, creepage distances, and establishes the pollution degree to which the product insulation system will be expected to be subjected. This is in compliance with IEC 60664-1. This basic safety publication focusing on a safety test method is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This sixth edition cancels and replaces the fifth edition published in 2020. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- In 7.3, the term "resistivity" has been replaced by "conductivity".
It has the status of a basic safety publication in accordance with IEC Guide 104.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13852-1:2025(Main)
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
EN 13852-1:2025

This document applies to general purpose offshore cranes including their supporting pedestals and structures.
This document is applicable to general purpose offshore cranes, whose structures are made of steel.
This document provides requirements for all significant hazards, hazardous situations and events relevant to general purpose offshore cranes, for lifting of goods and lifting of persons, when used as intended and under the conditions foreseen by the risk assessment (see Clause 4).
This document is applicable to general purpose offshore cranes, which are manufactured after the date of approval by CEN of this document.
This document is not applicable for:
a)   transportation, assembly, disabling, scrapping, installation or erecting of the crane;
b)   any item attached to the hook, such as loads, non-fixed load lifting attachments, lifting accessories, baskets, carriers and containers;
c)   lifting operations in ambient temperatures below - 20 °C;
d)   lifting operations in ambient temperatures above 45 °C;
e)   accidental loads as result of collisions, earthquakes, explosions, etc., which are not covered by exceptional loads defined in Table B.7 ;
f)   floating cranes (covered by EN13852-2), light offshore cranes (covered by FprEN13852-3) and 2D/3D motion compensated cranes;
g)   subsea lifting operations;
h)   lifting operations involving more than one crane;
i)   emergency rescue operations (except training).

  • Standard
    177 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16828:2025(Main)
Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique for detection and sizing of discontinuities (ISO 16828:2025)
EN ISO 16828:2025

This document specifies the general principles for the application of the time-of-flight diffraction (TOFD) technique for both detection and sizing of discontinuities in low-alloyed carbon steel components.
This document also applies to other types of materials, provided the application of the TOFD technique is performed with necessary consideration of geometry, acoustical properties of the materials, and the test sensitivity.
Although this document is applicable, in general terms, for discontinuities in materials and applications covered by ISO 16810, it contains references to the application on welds. This approach has been chosen for reasons of clarity as to the probe positions and directions of scanning.
Unless otherwise specified in the referencing documents, the minimum requirements specified in this document apply.
Unless explicitly stated otherwise, this document is applicable to the following categories of test objects as specified in ISO 16811:
—     category 1, without restrictions;
—     categories 2 and 3, specified restrictions apply (see Clause 10);
—     categories 4 and 5 require special procedures, which are also addressed (see Clause 10).
NOTE            Techniques for the use of TOFD for weld testing are described in ISO 10863 and the related acceptance criteria are given in ISO 15626.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 455-5:2025(Main)
Medical gloves for single use - Part 5: Extractable chemical residues
EN 455-5:2025

This document specifies a test method for the measurement of residual chemicals used in product manufacture, particularly potentially Type IV allergenic substances employed and remaining in medical gloves. It also provides information on the extraction medium, the method of extraction and quantitative assay of residual chemicals.
This document does not provide information on the allergenic potential, biological evaluation, or safety to the user of any product.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16827:2025(Main)
Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2025)
EN ISO 16827:2025

This document specifies the general principles and techniques for the characterization and sizing of previously detected discontinuities in order to ensure their evaluation against applicable acceptance criteria.
This document is applicable, in general terms, to discontinuities in those materials and applications covered by ISO 16810.
Phased array techniques can also be applied but additional steps or verifications can be needed.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day