SIST EN IEC 61347-2-14:2018/A11:2022
(Amendment)Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps
Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps
2021-04-13: This A11 is created to allow citation in OJEU of EN IEC 61347-2-14:2018
Geräte für Lampen - Teil 2-14: Besondere Anforderungen an gleich- und/oder wechselstromversorgte elektronische Betriebsgeräte für Induktions-Leuchtstofflampen
Appareillages de lampes - Partie 2-14: Exigences particulières pour les appareillages électroniques alimentés en courant continu et/ou alternatif pour les lampes fluorescentes à induction
Krmilne stikalne naprave za sijalke - 2-14. del: Posebne zahteve za enosmerno in/ali izmenično napajane elektronske krmilne stikalne naprave za fluorescenčne indukcijske sijalke - Dopolnilo A11
General Information
- Status
- Published
- Publication Date
- 07-Dec-2021
- Technical Committee
- IESV - Lamps and related equipment
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 11-Nov-2021
- Due Date
- 16-Jan-2022
- Completion Date
- 08-Dec-2021
- Directive
- Harmonized Standard2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limitsOJ Ref: L 133 OJ Date: 10-May-2022
Relations
- Effective Date
- 09-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 27-Apr-2021
Overview
SIST EN IEC 61347-2-14:2018/A11:2022 outlines particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps. This standard is an amendment (A11) to EN IEC 61347-2-14:2018, harmonizing with EU directives to ensure the safety and performance of controlgear used with induction-based fluorescent lighting systems. It is key for conformity assessment and market access within the European Union under the Low Voltage Directive (2014/35/EU).
The document was developed by the European Committee for Electrotechnical Standardization (CENELEC) and adopted as a Slovenian national standard by SIST. It provides manufacturers, importers, and certification bodies with harmonized requirements, supporting product compliance and safety in the European market.
Key Topics
- Scope: Applies to electronic controlgear for fluorescent induction lamps supplied with direct current (DC) and/or alternating current (AC).
- Safety compliance: Aligns with EU safety objectives, notably those established in the Low Voltage Directive (2014/35/EU).
- Normative references: Relies on associated standards such as IEC 60929, IEC 61347-1, IEC 61547, IEC 62532, and IEC 62639 for details about performance, safety, and electromagnetic compatibility.
- Conformity assessment: Compliance with this standard gives presumption of conformity with essential safety requirements under EU law, supporting the CE marking process.
- Implementation and transition dates: National standard implementation and withdrawal dates facilitate a smooth transition for stakeholders adapting to updated requirements.
Applications
SIST EN IEC 61347-2-14:2018/A11:2022 is crucial for a variety of lighting applications involving induction-based fluorescent lamps, particularly where controlgear must reliably manage DC or AC input. Key use cases and practical applications include:
- Commercial and industrial lighting: Ensures safety and compatibility of electronic controlgear used in offices, factories, warehouses, and public infrastructure.
- Lighting manufacturers: Supports the design, production, and testing of compliant electronic controlgear for induction lamps, streamlining regulatory approval.
- Product certification: Facilitates third-party certification and internal compliance checks for products intended for the European market.
- Maintenance and retrofitting: Assists facility managers and contractors in ensuring that replacement controlgear meets current safety and performance standards.
- Legal compliance: Mandatory reference for demonstrating alignment with Low Voltage Directive requirements, thus supporting CE marking and free circulation within the EU/EEA.
Related Standards
For comprehensive compliance and optimal performance in fluorescent induction lamp systems, the following standards should also be considered:
- IEC 61347-1: General and safety requirements for lamp controlgear.
- IEC 60929: Performance of AC and/or DC-supplied electronic controlgear for tubular fluorescent lamps.
- IEC 61547: EMC immunity requirements for lighting equipment.
- IEC 62532: Safety specifications for fluorescent induction lamps.
- IEC 62639: Performance specification for fluorescent induction lamps.
- EN 62493: Addresses specific considerations for electromagnetic fields (EMF) generated by lighting equipment.
Conclusion
Adhering to SIST EN IEC 61347-2-14:2018/A11:2022 ensures that electronic controlgear for fluorescent induction lamps operates safely and efficiently within both DC and AC supplied systems. This standard is integral for product safety, regulatory compliance, and market acceptance across Europe, making it a foundational document for stakeholders in the lighting industry.
Get Certified
Connect with accredited certification bodies for this standard
IMQ S.p.A. (Certification)
Italian electrical product certification.
SLG Prüf- und Zertifizierungs GmbH
German testing and certification body.
UL Solutions
Global safety science company with testing, inspection and certification.
Sponsored listings
Frequently Asked Questions
SIST EN IEC 61347-2-14:2018/A11:2022 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps". This standard covers: 2021-04-13: This A11 is created to allow citation in OJEU of EN IEC 61347-2-14:2018
2021-04-13: This A11 is created to allow citation in OJEU of EN IEC 61347-2-14:2018
SIST EN IEC 61347-2-14:2018/A11:2022 is classified under the following ICS (International Classification for Standards) categories: 29.130.01 - Switchgear and controlgear in general; 29.140.99 - Other standards related to lamps. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN IEC 61347-2-14:2018/A11:2022 has the following relationships with other standards: It is inter standard links to SIST EN 15193:2007, SIST EN 61347-1:2015, SIST EN 62733:2015, SIST EN IEC 61347-2-14:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN IEC 61347-2-14:2018/A11:2022 is associated with the following European legislation: EU Directives/Regulations: 2014/35/EU; Standardization Mandates: M/511. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN IEC 61347-2-14:2018/A11:2022 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2022
Krmilne stikalne naprave za sijalke - 2-14. del: Posebne zahteve za enosmerno
in/ali izmenično napajane elektronske krmilne stikalne naprave za fluorescenčne
indukcijske sijalke - Dopolnilo A11
Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied
electronic controlgear for fluorescent induction lamps
Geräte für Lampen - Teil 2-14: Besondere Anforderungen an gleich- und/oder
wechselstromversorgte elektronische Betriebsgeräte für Induktions-Leuchtstofflampen
Appareillages de lampes - Partie 2-14: Exigences particulières pour les appareillages
électroniques alimentés en courant continu et/ou alternatif pour les lampes fluorescentes
à induction
Ta slovenski standard je istoveten z: EN IEC 61347-2-14:2018/A11:2021
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61347-2-14:2018/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2021
ICS 29.140.99
English Version
Lamp controlgear - Part 2-14: Particular requirements for DC
and/or AC supplied electronic controlgear for fluorescent
induction lamps
Appareillages de lampes - Partie 2-14: Exigences Geräte für Lampen - Teil 2-14: Besondere Anforderungen
particulières pour les appareillages électroniques alimentés an gleich- und/oder wechselstromversorgte elektronische
en courant continu et/ou alternatif pour les lampes Betriebsgeräte für Induktions-Leuchtstofflampen
fluorescentes à induction
This amendment A11 modifies the European Standard EN IEC 61347-2-14:2018; it was approved by CENELEC on 2021-09-15. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61347-2-14:2018/A11:2021 E
European foreword
This document (EN IEC 61347-2-14:2018/A11:2021) has been prepared by CLC/TC 34 "Lighting".
The following dates are fixed:
• latest date by which this document has to be (dop) 2022-09-15
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2024-09-15
conflicting with this document have to be
withdrawn
This document amends EN IEC 61347-2-14:2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Re
...