SIST EN ISO 8130-2:2021

SLOVENSKI STANDARD
01-september-2021
Nadomešča:
SIST EN ISO 8130-2:2012
Praškasti premazi - 2. del: Določanje gostote s piknometrom za primerjavo plinov
(referenčna metoda) (ISO 8130-2:2021)
Coating powders - Part 2: Determination of density by gas comparison pyknometer
(referee method) (ISO 8130-2:2021)
Pulverlacke - Teil 2: Bestimmung der Dichte mit einem Gasvergleichspyknometer
(Schiedsverfahren) (ISO 8130-2:2021)
Poudres pour revêtement - Partie 2: Détermination de la masse volumique à l'aide d'un
pycnomètre à gaz (méthode de référence) (ISO 8130-2:2021)
Ta slovenski standard je istoveten z: EN ISO 8130-2:2021
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 8130-2
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2021
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 8130-2:2010
English Version
Coating powders - Part 2: Determination of density by gas
comparison pyknometer (referee method) (ISO 8130-
2:2021)
Poudres pour revêtement - Partie 2: Détermination de Pulverlacke - Teil 2: Bestimmung der Dichte mit einem
la masse volumique à l'aide d'un pycnomètre à gaz Gasvergleichspyknometer (Schiedsverfahren) (ISO
(méthode de référence) (ISO 8130-2:2021) 8130-2:2021)
This European Standard was approved by CEN on 28 April 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8130-2:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 8130-2:2021) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2022, and conflicting national standards shall
be withdrawn at the latest by January 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8130-2:2010.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN websites.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 8130-2:2021 has been approved by CEN as EN ISO 8130-2:2021 without any
modification.
INTERNATIONAL ISO
STANDARD 8130-2
Second edition
2021-06
Coating powders —
Part 2:
Determination of density by gas
comparison pycnometer (referee
method)
Poudres pour revêtement —
Partie 2: Détermination de la masse volumique à l'aide d'un
pycnomètre à gaz (méthode de référence)
Reference number
ISO 8130-2:2021(E)
©
ISO 2021
ISO 8130-2:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

ISO 8130-2:2021(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Materials . 1
6 Apparatus . 1
7 Sampling . 2
8 Procedure. 2
9 Expression of results . 3
10 Precision . 3
11 Test report . 3
Bibliography .
...