SIST EN 60064:1995/A11:2008

Overview

SIST EN 60064:1995/A11:2008 outlines the performance requirements for tungsten filament lamps intended for domestic and similar general lighting applications. As an amendment (A11:2008) to the existing SIST EN 60064:1995 standard, it further refines the regulatory framework to ensure that lamps deliver consistent and reliable performance. The standard is applicable to tungsten filament lamps between 25 W and 200 W, with rated voltages from 100 V to 250 V. It covers both clear and frosted (or equivalent) bulbs in A or PS shapes, and with caps B22d, E26, or E27. Compliance with the safety specifications defined in IEC 432-1 is mandatory for lamps within the scope of this standard.

This standard is essential for lamp manufacturers, product testers, and certification bodies throughout Europe and other regions that rely on harmonized lamp performance evaluation.

Key Topics

• Scope and Applicability
  Applies to tungsten filament lamps for domestic and similar general lighting purposes, specifically within the 25-200 W wattage and 100-250 V voltage ranges.

• Performance Requirements
  Specifies performance criteria such as luminous flux, light quality, energy consumption, bulb shape, and finish. Distinguishes requirements based on bulb types and cap fittings (B22d, E26, E27).

• Testing Methods and Compliance
  Defines standardized testing methods to verify that lamps meet the stipulated performance requirements. Lays out procedures for monitoring, assessment, and verification throughout the product lifecycle.

• Manufacturing Appraisal
  Includes guidance for whole-production appraisal, enabling lamp manufacturers to demonstrate compliance through systematic test records on finished products. This supports consistent quality and facilitates efficient product certification.

• Conformance with International Safety Standards
  Ensures all lamps align with the safety requirements of IEC 432-1.

Applications

Implementing SIST EN 60064:1995/A11:2008 delivers practical value in various settings:

• Quality Assurance for Manufacturers
  Lamp manufacturers can use this standard to demonstrate reliable product quality and compliance for general lighting products. It aids in streamlining certification processes and enables entry into regulated markets.

• Product Certification and Market Access
  Compliance with these requirements is often essential for CE marking and access to European markets, as well as recognition in other markets adhering to EN standards.

• Facility Lighting Standards
  Helps ensure consistent lighting performance in homes, offices, commercial spaces, and public buildings by supporting reliable lamp selection and installation.

• Regulatory Inspections and Procurement
  Procurement professionals and regulatory authorities can reference this standard during inspections, product selection, and supplier evaluation to ensure lamps meet harmonized performance criteria.

Related Standards

The following standards are often referenced or used in conjunction with SIST EN 60064:1995/A11:2008 for lighting product compliance and performance evaluations:

• IEC 432-1 – Safety requirements for tungsten filament lamps.
• EN 60064:1995 – The base standard addressing tungsten filament lamps’ requirements.
• Additional Amendments to EN 60064, such as A2:2003, A3:2006, and A4:2007, which provide further technical updates.
• National and Regional Standardization Documents aligning with or derived from CENELEC and IEC requirements.

By adhering to SIST EN 60064:1995/A11:2008, organizations and manufacturers ensure robust lamp performance, safer products, and harmonization with international lighting standards. This facilitates widespread acceptance and simplifies international trade in lighting equipment.