SIST EN 60317-8:2010

SLOVENSKI STANDARD
01-september-2010
1DGRPHãþD
SIST EN 60317-8:2001
SIST EN 60317-8:2001/A1:2001
SIST EN 60317-8:2001/A2:2002
Specifikacije za posebne tipe navitij - 8. del: S poliesterimidom emajliran bakren
okrogel vodnik, razred 180 (IEC 60317-8:2010)
Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled
round copper wire, class 180 (IEC 60317-8:2010)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 8:
Runddrähte aus Kupfer, lackisoliert mit Polyesterimid, Klasse 180 (IEC 60317-8:2010)
Spécifications pour types particuliers de fils de bobinage - Partie 8: Fil de section
circulaire en cuivre émaillé avec polyesterimide, classe 180 (CEI 60317-8:2010)
Ta slovenski standard je istoveten z: EN 60317-8:2010
ICS:
29.060.10 Žice Wires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60317-8
NORME EUROPÉENNE
May 2010
EUROPÄISCHE NORM
ICS 29.060.10 Supersedes EN 60317-8:1994 + A1:1997 + A2:1998

English version
Specifications for particular types of winding wires -
Part 8: Polyesterimide enamelled round copper wire, class 180
(IEC 60317-8:2010)
Spécifications pour types particuliers  Technische Lieferbedingungen
de fils de bobinage - für bestimmte Typen von Wickeldrähten -
Partie 8: Fil de section circulaire en cuivre Teil 8: Runddrähte aus Kupfer, lackisoliert
émaillé avec polyesterimide, classe 180 mit Polyesterimid, Klasse 180
(CEI 60317-8:2010) (IEC 60317-8:2010)

This European Standard was approved by CENELEC on 2010-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-8:2010 E
Foreword
The text of document 55/1177/FDIS, future edition 4 of IEC 60317-8, prepared by IEC TC 55, Winding
wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60317-8
on 2010-05-01.
This European Standard supersedes EN 60317-8:1994 + A1:1997 + A2:1998.
The main changes with respect to EN 60317-8:1994 are as follows:
– introduction of requirements for appearance;
– new reference to resistance to refrigerants test method;
– deletion of high temperature failure requirements;
– introduction of pin hole test requirements.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-02-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-05-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60317-8:2010 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60317-8:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60317-0-1 2008 Specifications for particular types of EN 60317-0-1 2008
winding wires -
Part 0-1: General requirements - Enamelled
round copper wire
IEC 60851-4 1996 Winding wires - Test methods - EN 60851-4 1996
+ A1 1997 Part 4: Chemical properties + A1 1997
+ A2 2005 + A2 2005
IEC 60317-8 ®
Edition 4.0 2010-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Specifications for particular types of winding wires –
Part 8: Polyesterimide enamelled round copper wire, class 180

Spécifications pour types particuliers de fils de bobinage –
Partie 8: Fil de section circulaire en cuivre émaillé avec polyesterimide,
classe 180
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
J
CODE PRIX
ICS 29.060.10 ISBN 2-8318-1082-7
– 2 – 60317-8 © IEC:2010
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Terms, definitions and general notes on methods of test and appearance .6
3.1 Terms and definitions .6
3.2 General notes on methods of test.7
3.3 Appearance.7
4 Dimensions .7
5 Electrical resistance .7
6 Elongation .7
7 Springiness .7
8 Flexibility and adherence.7
9 Heat shock .7
10 Cut-through .7
11 Resistance to abrasion (nominal conductor diameters from 0,250 mm up to and
including 2,500 mm) .7
12 Resistance to solvents.8
13 Breakdown voltage .8
14 Continuity of insulation .8
15 Temperature index .8
16 Resistance to refrigerants.9
17 Solderability .9
18 Heat or solvent bonding.9
19 Dielectric dissipation factor.9
20 Resistance to transformer oil .9
21 Loss of mass .9
23 Pin hole test .9
30 Packaging .9

Table 1 – Resistance to abrasion.8

60317-8 © IEC:2010 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SPECIFICATIONS FOR PARTICULAR TYPES
OF WINDING WIRES –
Part 8: Polyesterimide enamelled round copper wire,
class 180
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committee
...