iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TP IEC TR 61000-3-13:2025/COR1:2025

(Corrigendum)

Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 3-13: Limits - Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems

Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 3-13: Limits - Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems

Subscribe to IEC 60061 Database to access the full and updated content of the series.

[Not translated]

General Information

Status
Not Published
ICS
29.140.10 - Lamp caps and holders
33.100.10 - Emission
Technical Committee
EMC - Electromagnetic compatibility
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
28-Apr-2025
Due Date
16-Jun-2025
Ref Project
IEC TR 61000-3-13:2008/COR1:2010 - Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 3-13: Limits - Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems

Relations

Corrects
SIST-TP IEC TR 61000-3-13:2025 - Electromagnetic compatibility (EMC) - Part 3-13: Limits - Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems
Effective Date
05-Sep-2023

Buy Standard

IEC TR 61000-3-13:2008/COR1:2010 - Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 3-13: Limits - Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems Released:4/22/2010IEC TR 61000-3-13:2008/COR1:2010 - Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 3-13: Limits - Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems Released:4/22/2010
PreviousNext
Technical report
IEC TR 61000-3-13:2008/COR1:2010 - Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 3-13: Limits - Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems Released:4/22/2010
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC/TR 61000-3-13
(First edition – 2008)
Electromagnetic compatibility (EMC) –
Part 3-13: Limits – Assessment of emission limits for the connection of
unbalanced installations to MV, HV and EHV power systems

CORRIGENDUM 1
Figure A.2
Replace the existing Figure A.2 by the following:

HVHV NP NPS US Unnbalbalanancce (e %(%) )
Unbalance reduction factor (T ):
Unbalance reduction factor (TuUM):
uUM
MV NPS Unbalance (%)
MV NPS Unbalance (%)
HV and MV measu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 16179:2025(Main)
Footwear - Critical substances potentially present in footwear and footwear components - Determination of organotin compounds in footwear materials (ISO 16179:2025)
EN ISO 16179:2025

This document specifies a test method for the qualification and quantification of organotin compounds by applying gas chromatography coupled with mass spectrometry. This test method is applicable to all types of footwear materials except metal hardware (see ISO/TR 16178).

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 319 411-1 V1.5.1:2025(Main)
Electronic Signatures and Trust Infrastructures (ESI) - Policy and security requirements for Trust Service Providers issuing certificates - Part 1: General requirements
ETSI EN 319 411-1 V1.5.1 (2025-04)

REN/ESI-0019411-1v151

  • Standard
    60 pages
    English language
    sale 15% off
  • Standard
    60 pages
    English language
    sale 15% off
  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14373:2022+A1:2025(Main + Amendment)
Explosion suppression systems
EN 14373:2021+A1:2025

This document describes the basic requirements for the design and application of explosion suppression systems. This document also specifies test methods for evaluating the effectiveness and the scaling up of explosion suppression systems against defined explosions. This document covers:
-   general requirements for explosion suppression system parts;
-   evaluating the effectiveness of an explosion suppression system;
-   evaluating the scale up of an explosion suppression system to larger than tested volumes;
-   development and evaluation of design tools for explosion suppression systems;
-   installation, operation and maintenance instructions for an explosion suppression system.
This document is applicable only to explosion suppression systems intended for the protection of closed, or essentially closed, enclosures in which an explosion could result as a consequence of ignition of an explosible mixture, e.g. dust-air, gas(vapour)-air, dust-gas(vapour)-air and mist-air.
This document is not applicable for explosions of materials listed below, or for mixtures containing some of those materials:
-   unstable materials that are liable to dissociate;
-   explosive materials;
-   pyrotechnic materials;
-   pyrophoric materials.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 80000-13:2025(Main)
Quantities and units - Part 13: Information science and technology
EN IEC 80000-13:2025

IEC 80000-13:2025 specifies names, symbols and definitions for quantities and units used in information science and technology. Where appropriate, conversion factors are also given. Prefixes for binary multiples are also given. International Standard IEC 80000-13 has been prepared by IEC technical committee 25: Quantities and units in close cooperation with ISO/TC 12: Quantities and units.
This second edition cancels and replaces the first edition published in 2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
addition of new prefixes for binary multiples.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60079-11:2025(Main)
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" (IEC 60079-11:2023 + COR1:2023)
EN IEC 60079-11:2024

This part of IEC 60079 specifies the construction and testing of intrinsically safe apparatus intended for use in an explosive atmosphere, and for associated apparatus which is intended for connection to intrinsically safe circuits which enter such atmospheres.
This Type of Protection is applicable to electrical equipment in which the electrical circuits themselves are incapable of causing ignition of a surrounding explosive atmosphere. This includes electrical equipment which contains circuits that are intrinsically safe only under certain conditions, for example under battery supply with mains supply removed.
This standard is also applicable to electrical equipment or parts of electrical equipment located outside the explosive atmosphere or protected by another Type of Protection listed in IEC 60079-0, where the intrinsic safety of the electrical circuits in the explosive atmosphere may depend upon the design and construction of such electrical equipment or parts of such electrical equipment. The electrical circuits exposed to the explosive atmosphere are assessed for use in such an atmosphere by applying this standard.
This standard applies to sensors connected to intrinsically safe circuits but does not apply to the protection of catalytic elements for Group IIC or Group IIB + H2.
The requirements for intrinsically safe systems are provided in IEC 60079-25.
This standard supplements and modifies the general requirements of IEC 60079-0, except as indicated in Table 1. Where a requirement of this standard conflicts with a requirement of IEC 60079-0, the requirement of this standard takes precedence.
Unless otherwise stated, the requirements in this standard are applicable to both intrinsically safe apparatus and associated apparatus, and the generic term "apparatus" is used throughout the standard.
As this standard applies only to electrical equipment, the term "equipment" used in the standard always means “electrical equipment”.
This standard applies to apparatus for use under the atmospheric conditions of IEC 60079-0 with additional requirements for for use at lower atmospheric pressures in the range from 60 kPa (0,6 bar), up to 110 kPa (1,1 bar).
[...]

  • Standard
    222 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63044-3:2018/A1:2025(Amendment)
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements (IEC 63044-3:2017/A1:2021)
EN IEC 63044-3:2018/A1:2025

NEXT ACTION: CCMC ACTION to request HAS assessment @ PUB when HAS system is operational
2022-01-17: Under discussion with the desk officer. upon the greenlight of the desk officer, it can be published.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14908-10:2025(Main)
Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 10: Web Services for Control Networking Protocol Specification
EN 14908-10:2025

This document specifies an open and extensible standard for residential, commercial, and industrial control and automation applications using the EN 14908-1 control network protocol and related protocols (EN 14908-2 to EN 14908-9) to provision and manage IoT devices, to access and update data from the devices, and to aggregate data from diverse devices and protocols for delivery to external applications and services.
The  web services as specified in this document are implemented on a central gateway or edge server that communicates with multiple sensor, actuator, and controller edge devices using one or more edge protocols such as EN 14908-1, and also interfaces with one or more enterprise and cloud services or applications.

  • Standard
    442 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50176:2025(Main)
Automatic electrostatic application systems for ignitable liquid coating materials - Safety requirements
EN 50176:2025

1.1   This document specifies the electrical requirements for the design of automatic electrostatic application systems for liquid coating materials which can be ignited in an atomised state, used within a temperature range from 5 °C to 40 °C.
This document considers automatic electrostatic application systems for processing ignitable liquid coating materials, where the conductivity of the complete system is limited up to 50 nS/cm. Together with additional measures like e.g. potential separation systems, these requirements can also be applied to ignitable liquid coating materials, where the conductivity of the complete system is limited up to 2 000 μS/cm.
Ignition hazards related to the generated explosive atmosphere and the protection of persons against electric shock are considered.
1.2   This document specifies
-   requirements for an interface to machinery according to EN 16985:2018,
-   additional requirements for machinery covered by EN 1953:2025 and EN 12621:2025.
1.3   This document also specifies requirements for a safe operation of electrostatic application systems, including the electrical installation. The requirements consider both the processing of coating materials and the cleaning and purge processes.
1.4   This document applies to three types of spraying systems; see 5.1.1.
Spraying systems are classified as equipment of group II, category 2G (for intended use in zone 1 or zone 2) or category 3G (for intended use in zone 2).
Only electrostatic spraying systems operating with a d.c. sinusoidal ripple of not more than 10 % of the r.m.s. value are considered.
1.5   For electrostatic application systems used in food and pharmaceutical industry, additional requirements may apply.
1.6   This document does not apply to
-   potential separation systems;
-   selection, installation and application of other electrical and non-electrical equipment in areas with explosion hazard, see EN 60079-14:2014 and EN 16985:2018;
-   quality assurance systems for electrostatic spraying equipment (see EN ISO/IEC 80079-34:2020, ZB.11).

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62391-2:2025(Main)
Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specfication - Electric double layer capacitors for power application (IEC 62391-2:2025)
EN IEC 62391-2:2025

IEC 62391-2:2025 applies to electric double-layer capacitors for power application.
Electric double-layer capacitors for power are intended for applications that require discharge currents in the range from mA to A. The characteristics of the capacitors include such performance as relatively high capacitance and low internal resistance, which is applicable to Class 3 and Class 5 of the measurement classification specified in IEC 62391-1:2022.
The object of this document is to specify preferred ratings and characteristics and to select from IEC 62391-1:2022 the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements specified in detail specifications referring to this document provide specific test severities and requirements of an equal or higher performance level.
The definition of power density and its calculating procedure can be found in Annex A.
This edition includes the following significant technical changes with respect to the previous edition:
a) the document has been completely restructured to comply with the ISO/IEC Directives, Part 2;
b) introduction of a new technical categorization for the test methods;
c) reorganization of the test methods have been according to these new categories;
d) revision of the tables, figures and references according to changes.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-6:2016/A1:2025(Amendment)
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" (IEC 60079-6:2015/A1:2020)
EN 60079-6:2015/A1:2024

NEXT ACTION: UNDER BT CONSULTATION SOON (finalization EN with revised Annex Z)
HAS CONSULTANT PUB ASSESSMENT BY 2020-09-24 -- non compliant assessment received
20200325: consultant assessment missing and Annex ZZ was not circulated at FV; document blocked until such a time as this can be resolved

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day