SIST EN IEC 61131-3:2025

SLOVENSKI STANDARD
01-oktober-2025
Programirljivi krmilniki - 3. del: Programski jeziki
Programmable controllers - Part 3: Programming languages
Speicherprogrammierbare Steuerungen - Teil 3: Programmiersprachen
Automates programmables - Partie 3: Langages de programmation
Ta slovenski standard je istoveten z: EN IEC 61131-3:2025
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61131-3

NORME EUROPÉENNE
EUROPÄISCHE NORM July 2025
ICS 25.040.40; 35.240.50 Supersedes EN 61131-3:2013
English Version
Programmable controllers - Part 3: Programming languages
(IEC 61131-3:2025)
Automates programmables - Partie 3: Langages de Speicherprogrammierbare Steuerungen - Teil 3:
programmation Programmiersprachen
(IEC 61131-3:2025) (IEC 61131-3:2025)
This European Standard was approved by CENELEC on 2025-06-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61131-3:2025 E

European foreword
The text of document 65B/1281/FDIS, future edition 4 of IEC 61131-3, prepared by SC 65B
"Measurement and control devices" of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2026-07-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2028-07-31
document have to be withdrawn
This document supersedes EN 61131-3:2013 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61131-3:2025 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60848 NOTE Approved as EN 60848
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61131-1 - Programmable controllers - Part 1: General EN 61131-1 -
information
IEC 61131-5 - Programmable controllers - Part 5: Communications EN 61131-5 -
ISO/IEC 10646 - Information technology - Universal coded character - -
set (UCS)
ISO/IEC 60559 - Information technology - Microprocessor Systems - - -
Floating-Point arithmetic
IEC 61131-3 ®
Edition 4.0 2025-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Programmable controllers –
Part 3: Programming languages
Automates programmables –
Partie 3: Langages de programmation
ICS 25.040.40, 35.240.50 ISBN 978-2-8327-0436-3

IEC 61131-3:2025-05(en-fr)
– 2 – IEC 61131-3:2025 © IEC 2025
CONTENTS
FOREWORD . 7
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 9
4 Architectural models . 17
4.1 Software model . 17
4.2 Communication model . 19
4.3 Programming model . 20
5 Compliance . 22
5.1 General . 22
5.2 Feature tables . 22
5.3 Implementer’s compliance statement . 22
6 Common elements . 24
6.1 Use of printed characters . 24
6.1.1 Character set. 24
6.1.2 Identifiers . 24
6.1.3 Keywords . 25
6.1.4 Use of white space . 25
6.1.5 Comments . 25
6.2 Pragma. 26
6.3 Literals – External representation of data . 26
6.3.1 General. 26
6.3.2 Numeric literals and string literals . 26
6.3.3 Character string literals . 28
6.3.4 Duration literal . 31
6.3.5 Date and time of day literal . 31
6.4 Data types . 32
6.4.1 General. 32
6.4.2 Elementary data types (BOOL, INT, REAL, STRING, etc.) . 32
6.4.3 Generic data types . 36
6.4.4 User-defined data types . 37
6.5 Variables . 51
6.5.1 Declaration and initialization of variables . 51
6.5.2 Variable sections . 54
6.5.3 Variable length ARRAY variables . 57
6.5.4 Constant variables . 59
6.5.5 Directly represented variables ( % ) . 59
6.5.6 Retentive variables (RETAIN, NON_RETAIN) . 62
6.6 Program organization units (POUs) . 63
6.6.1 Common features for POUs . 63
6.6.2 Functions . 77
6.6.3 Function blocks. 113
6.6.4 Programs . 132
6.6.5 Classes. 134
6.6.6 Interface . 155
6.6.7 Object-oriented features for function block types . 165

IEC 61131-3:2025 © IEC 2025 – 3 –
6.6.8 Polymorphism . 171
6.7 Sequential function chart (SFC) elements. 174
6.7.1 General. 174
6.7.2 Steps . 175
6.7.3 Transitions . 176
6.7.4 Actions . 179
6.7.5 Rules of evolution . 187
6.8 Configuration elements . 195
6.8.1 General. 195
6.8.2 Tasks . 200
6.9 Synchronization of concurrent execution . 205
6.9.1 General. 205
6.9.2 Mutex . 206
6.9.3 Object-oriented mutex . 208
6.9.4 Semaphore. 209
6.9.5 Object-oriented semaphore . 211
6.10 Namespaces . 211
6.10.1 General. 211
6.10.2 Declaration . 212
6.10.3 Usage . 217
6.10.4 Namespace directive USING . 218
7 Textual languages . 221
7.1 Common elements . 221
7.2 Structured text (ST) . 221
7.2.1 General. 221
7.2.2 Expressions . 221
7.2.3 Statements . 223
8 Graphical languages . 229
8.1 Common elements . 229
8.1.1 General. 229
8.1.2 Representation of variables and instances . 229
8.1.3 Representation of lines and blocks . 231
8.1.4 Direction of flow in networks . 232
8.1.5 Evaluation of networks . 233
8.1.6 Execution control elements . 234
8.2 Ladder diagram (LD) . 235
8.2.1 General. 235
8.2.2 Power rails . 236
8.2.3 Link elements and states . 236
8.2.4 Contacts . 236
8.2.5 Coils . 238
8.2.6 Functions and function blocks . 239
8.2.7 Order of network evaluation . 239
8.3 Function block diagram (FBD) . 240
8.3.1 General. 240
8.3.2 Combination of elements . 240
8.3.3 Order of network evaluation . 240
Annex A (normative) Formal specification of the language elements . 241

– 4 – IEC 61131-3:2025 © IEC 2025
Annex B (informative) List of major changes and extensions of Edition 4 of
IEC 61131-3 . 249
B.1 General . 249
B.2 New features . 249
B.3 Significant changes . 249
B.4 Deletions . 250
B.5 Deprecations . 250
Annex C (informative) Relating strings, characters, and their literals to ISO/IEC 10646 . 251
Bibliography . 253

Figure 1 – Software model . 18
Figure 2 – Communication model . 20
Figure 3 – Combination of programmable controller language elements . 21
Figure 4 – Implementer’s compliance statement (Example) . 23
Figure 5 – Hierarchy of the generic data types . 37
Figure 6 – Initialization by literals and constant expressions (Rules) . 38
Figure 7 – Variable declaration keywords (Summary) . 54
Figure 8 – Usage of VAR_GLOBAL, VAR_EXTERNAL and CONSTANT (Rules). 55
Figure 9 – Conditions for the initial value of a variable (Rules) . 62
Figure 10 – Formal and non-formal representation of call (Examples) . 68
Figure 11 – Data type conversion rules – implicit and explicit (Summary) . 72
Figure 12 – Implicit type conversions overview . 73
Figure 13 – Data type conversion from string types to array of bytes . 96
Figure 14 – Data type conversion from array of bytes to string types. 97
Figure 15 – Usage of function block input and output parameters (Rules) . 123
Figure 16 – Usage of function block input and output parameters (Illustration of rules) . 124
Figure 17 – Standard timer function blocks – timing diagrams (Rules) . 130
Figure 18 – Recommended implementation in pseudo code for timer . 132
Figure 19 – Overview of inheritance and interface implementation . 135
Figure 20 – Inheritance of classes (Illustration) . 144
Figure 21 – Interface with derived classes (Illustration) . 157
Figure 22 – Inheritance of interface and class (Illustration) . 162
Figure 23 – Function block types with optional body and methods (Illustration) . 168
Figure 24 – Inheritance of function block body with SUPER() (Example) . 170
Figure 25 – ACTION_CONTROL function block – External interface (Summary) . 184
Figure 26 – ACTION_CONTROL function block body (Summary) . 185
Figure 27 – Action control (Example) . 186
Figure 28 – SFC evolution (Rules). 193
Figure 29 – SFC errors (Example) . 194
Figure 30 – Configuration (Example) . 196
Figure 31 – CONFIGURATION and RESOURCE declaration (Example). 199
Figure 32 – The reference implementation of mutex functions . 208
Figure 33 – The reference implementation of object-oriented mutex. 209
Figure 34 – The reference implementation of semaphore functions . 210

IEC 61131-3:2025 © IEC 2025 – 5 –
Figure 35 – The reference implementation of object-oriented semaphore . 211
Figure 36 – Accessibility using namespaces (Rules) . 214
Figure 37 – Common textual elements (Summary) . 221
Figure C.1 – Relation between ISO/IEC 10646 and IEC 61131-3 . 251
Figure C.2 – Example of encoded strings in memory . 252

Table 1 – Character set . 24
Table 2 – Identifiers . 24
Table 3 – Comments . 26
Table 4 – Pragma . 26
Table 5 – Numeric literals . 28
Table 6 – Character string literals . 29
Table 7 – Two-character combinations in character strings . 30
Table 8 – Duration literals . 31
Table 9 – Date and time of day literals . 32
Table 10 – Elementary data types . 33
Table 11 – Declaration of user-defined data types and initialization . 38
Table 12 – Reference operations . 51
Table 13 – Declaration of variables . 53
Table 14 – Initialization of variables . 53
Table 15 – Variable-length ARRAY variables . 57
Table 16 – Directly represented variables . 60
Table 17 – Partial access of ANY_BIT variables (except BOOL) . 65
Table 18 – Execution control graphically using EN and ENO . 70
Table 19 – Function declaration . 79
Table 20 – Function call . 81
Table 21 – Typed and overloaded functions . 84
Table 22 – Data type conversion function . 86
Table 23 – Data type conversion of numeric data types . 88
Table 24 – Data type conversion of bit data types . 91
Table 25 – Data type conversion of bit and numeric types. 92
Table 26 – Data type conversion of date and time types . 94
Table 27 – Data type conversion of character types . 95
Table 28 – Numerical and arithmetic functions . 98
Table 29 – Arithmetic functions . 99
Table 30 – Bit shift functions. 100
Table 31 – Bitwise Boolean functions . 100
Table 32 – Selection functions . 101
Table 33 – Comparison functions . 102
Table 34 – Character string functions . 103
Table 35 – Numerical functions of time and duration data types . 105
Table 36 – Additional functions of time data types CONCAT and SPLIT . 107
Table 37 – Function for endianness conversion . 111

– 6 – IEC 61131-3:2025 © IEC 2025
Table 38 – Functions of enumerated and named values data types . 111
Table 39 – Validate functions . 112
Table 40 – Function ASSERT . 112
Table 41 – Function block type declaration. 114
Table 42 – Function block instance declaration . 118
Table 43 – Function block call. 120
a
Table 44 – Standard bistable function blocks . 126
Table 45 – Standard edge detection function blocks . 127
Table 46 – Standard counter function blocks . 128
Table 47 – Standard timer function blocks . 129
Table 48 – Program declaration . 133
Table 49 – Class . 136
Table 50 – Class instance declaration . 138
Table 51 – Textual call of methods – Formal and non-formal parameter list . 142
Table 52 – Interface . 156
Table 53 – Assignment attempt . 164
Table 54 – Object-oriented function block type . 166
Table 55 – SFC step . 176
Table 56 – SFC transition and transition condition . 178
Table 57 – SFC declaration of actions . 180
Table 58 – Association between step and action . 181
Table 59 – Action block . 182
Table 60 – Action qualifiers . 182
Table 61 – Action control features . 187
Table 62 – Sequence evolution – graphical . 188
Table 63 – Configuration and resource declaration . 198
Table 64 – Task . 201
Table 65 – Mutex type and operations . 207
Table 66 – Semaphore type and operations . 209
Table 67 – Namespace . 216
Table 68 – Nested namespace declaration options. 217
Table 69 – Namespace directive USING . 220
Table 70 – Operators of the ST language . 223
Table 71 – ST language statements . 224
Table 72 – Graphical execution control elements . 235
Table 73 – Power rails and link elements . 236
Table 74 – Contacts. 237
Table 75 – Coils . 239

IEC 61131-3:2025 © IEC 2025 – 7 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PROGRAMMABLE CONTROLLERS –
Part 3: Programming languages
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC 61131-3 has been prepared by subcommittee 65B: Measurement and control devices, of
IEC technical committee 65: Industrial-process measurement, control and automation. It is an
International Standard.
This fourth edition cancels and replaces the third edition published in 2013. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) inclusion of UTF-8 strings and their associated functions;
b) Annex B contains a comprehensive list of features that have been added, removed or
deprecated in comparison to IEC 61131-3:2013.

– 8 – IEC 61131-3:2025 © IEC 2025
The text of this International Standard is based on the following documents:
Draft Report on voting
65B/1281/FDIS 65B/1291/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications.
A list of all the parts in the IEC 61131 series, published under the general title Programmable
controllers can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn, or
• revised.
IEC 61131-3:2025 © IEC 2025 – 9 –
PROGRAMMABLE CONTROLLERS –
Part 3: Programming languages
1 Scope
This part of IEC 61131 specifies the syntax and semantics of programming languages for
programmable controllers as defined in IEC 61131-1.
This document specifies the syntax and semantics of a unified suite of programming languages
for programmable controllers (PCs). This suite consists of the textual language structured text
(ST), and the graphical languages, ladder diagram (LD) and function block diagram (FBD).
An additional set of graphical and equivalent textual elements named sequential function chart
(SFC) is defined for structuring the internal organization of programs and function blocks. Also,
configuration elements are defined which support the installation of programmable controller
programs into programmable controller systems.
In addition, features are defined which facilitate communication among programmable
controllers and other components of automated systems.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 61131-1, Programmable controllers – Part 1: General information
IEC 61131-5, Programmable controllers – Part 5: Communications
ISO/IEC 10646, Information technology – Universal Coded Character Set (UCS)
ISO/IEC 60559, Floating-point arithmetic
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 61131-1 and the
following apply.
ISO and IEC maintain terminology databases for use in standardization at the following
addresses:
• IEC Electropedia: available at https://www.electropedia.org/
• ISO Online browsing platform: available at https://www.iso.org/obp
3.1
access path
association of a symbolic name with a variable for the purpose of open communication

– 10 – IEC 61131-3:2025 © IEC 2025
3.2
action
Boolean variable or a collection of operations to be performed, together with an associated
control structure
3.3
action block
graphical language element which utilizes a Boolean input variable to determine the value of a
Boolean output variable or the enabling condition for an action, according to a predetermined
control structure
3.4
aggregate
structured collection of data objects forming a data type
3.5
array
aggregate that consists of data objects, with identical attributes, each of which can be uniquely
referenced by subscripting
3.6
assignment
mechanism to give a value to a variable or to an aggregate
3.7
base type
data type, function block type or class from which further types are inherited or derived
3.8
based number
number represented in a specified base other than ten
3.9
binary coded decimal
BCD
encoding for decimal numbers in which each digit is represented by its own binary sequence
3.10
bistable function block
function block with two stable states controlled by one or more inputs
3.11
bit string
data element consisting of one or more bits
3.12
bit string literal
literal that directly represents a bit string value of data type BOOL, BYTE, WORD, DWORD, or
LWORD
3.13
body
set of operations of a program organization unit
3.14
call
language construct causing the execution of a function, function block, or method

IEC 61131-3:2025 © IEC 2025 – 11 –
3.15
character string
aggregate that consists of an ordered sequence of characters
3.16
character string literal
literal that directly represents a character or character string value of data type CHAR, WCHAR,
UCHAR, STRING, WSTRING or USTRING
3.17
class
program organization unit consisting of:
• the definition of a data structure,
• a set of methods and properties to be performed upon the data structure
3.18
comment
language construct for the inclusion of text having no impact on the execution of the program
3.19
configuration
language element corresponding to one or multiple programmable controller system
3.20
constant
language element which declares a data element with a fixed value
3.21
counter function block
function block which accumulates a value for the number of changes sensed at one or more
specified inputs
3.22
data type
language element which allows a set of values together with a set of permitted operations
3.23
date and time
date within the year and the time of day represented as a single language element
3.24
declaration
mechanism for establishing the definition of a language element
3.25
delimiter
character or combination of characters used to separate program language elements
3.26
derived class
extended class
child class
class that extends another class by inheritance
3.27
directly derived data type
data type that is declared as an alias for another data type

– 12 – IEC 61131-3:2025 © IEC 2025
3.28
derived function block type
function block type created by inheritance from another function block type or class type
3.29
direct representation
means of representing a variable in a programmable controller program from which an
implementation-specified correspondence to a physical or logical location can be determined
directly
3.30
double word
data element containing 32 bits
3.31
dynamic binding
situation in which the implementation of a method is retrieved during runtime according to the
actual type of the instance
3.32
evaluation
process of establishing a value for an expression or a function, or for the outputs of a network
or function block instance, during program execution
3.33
execution control element
language element which controls the flow of program execution
3.34
falling edge
change from TRUE (1) to FALSE (0) of a Boolean variable
3.35
function
program organization unit that does not retain state and which, when executed, typically yields
one result and possibly additional output variables
3.36
function block instance
instance of a function block type
3.37
function block type
language element consisting of:
• the definition of a data structure partitioned into input, output, and internal variables; and
• a set of operations or a set of methods and properties to be performed upon the elements
of the data structure when an instance of the function block type is called
3.38
function block diagram
network in which the nodes are function block instances, graphically represented functions or
method calls, variables, literals, and labels
3.39
generic data type
data type which represents more than one type of data

IEC 61131-3:2025 © IEC 2025 – 13 –
3.40
global variable
variable whose scope is global
3.41
hierarchical addressing
direct representation of a data element as a member of a physical or logical hierarchy
EXAMPLE A point within a module which is contained in a rack, which in turn is contained in a cubicle, etc.
3.42
identifier
combination of letters, numbers, and underscore characters which begins with a letter or
underscore and which names a language element
3.43
implementation
product version of a PLC or the programming and debugging tool provided by the implementer
3.44
implementer
manufacturer of the PLC or the programming and debugging tool provided to the user to
program a PLC application
3.45
inheritance
creation of a new class, function block type or interface base
...