SIST EN IEC 61169-1-9:2025

SLOVENSKI STANDARD
oSIST prEN IEC 61169-1-9:2024
01-april-2024
Radiofrekvenčni konektorji - 1-9. del: Mehanske preskusne metode - Izvlečna
luknja za varnostno žico
Radio-frequency connectors- Part 1-9: Mechanical test methods- Safety wire hole pull-
out
Ta slovenski standard je istoveten z: prEN IEC 61169-1-9:2024
ICS:
33.120.30 Radiofrekvenčni konektorji RF connectors
(RF)
oSIST prEN IEC 61169-1-9:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN IEC 61169-1-9:2024
oSIST prEN IEC 61169-1-9:2024
46F/659/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61169-1-9 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-02-09 2024-05-03
SUPERSEDES DOCUMENTS:
46F/642/NP, 46F/654/RVN
IEC SC 46F : RF AND MICROWAVE PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
United States of America Mr John Morelli
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Radio-frequency connectors- Part 1-9: Mechanical test methods- Safety wire hole pull-out

PROPOSED STABILITY DATE: 2027
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

oSIST prEN IEC 61169-1-9:2024
2 46F/659/CDV
NOTE FROM TC/SC OFFICERS:
oSIST prEN IEC 61169-1-9:2024
3 46F/659/CDV
1 Radio-frequency connectors – Part 1-9:
2 Mechanical test methods- Safety wire hole pull-out
3 1 Scope
4 This specification specifies test methods for safety wire hole pull-out of RF connectors.
5 This specification is applicable to the connectors with safety wire holes.
6 2 Normative references
7 The following documents, in whole or in part, are normatively referenced in this document and
8 are indispensable for its application. For dated references, only the edition cited applies. For
9 undated references, the latest edition of the referenced document (including any amendments)
10 applies.
11 IEC 61169-1 Radio frequency connectors –Part 1: Generic specification – General
12 requirements and measuring methods
13 3
...